Go to homepage
0 item(s) €0.00
Skip image gallery
tansun remote control 4 channel

Tansun Remote Control 4 Channel

€49.00 Prices incl. VAT

plus shipping costs

Available - Delivery time approx. 3-5 days
Product number: 0040100029

Questions? Personal advice: +49 9951 - 690 190

  • Try it risk-free for 30 days
  • Secure payment with PayPal, cards and Klarna
  • Fast shipping with DHL
  • Service and shipping from Germany
  • Flexible instalment payments
  • More than 30 years of experience
Plus X Award eKomi award Top DJ Store award
4.94 out of 5.00 Excellent 35,998 reviews 98.13% positive

Pay securely and flexibly

PayPal Apple Pay Visa Mastercard Amazon Pay Prepayment iDEAL and Wero in3 Bancontact Przelewy24

Product description Tansun Remote Control 4 Channel

If several TANSUN radio dimmers are to respond together, you can use this remote control to operate them in sync within radio range. The 4-channel remote control switches compatible dimmers between three power levels and on or off; the stated range is approximately 20 m.

For heating control, 33%, 66% and 100% are available, as well as an on/off function. The radio connection operates at 868.3 MHz with FSK modulation. The actual signal range may be affected by interference on the same frequency.

The remote control is powered by a CR2032 lithium battery, which can be replaced when needed. The temperature range is from -10 °C to +55 °C; the stated protection rating is IP55. Make sure the battery is inserted with the correct polarity when replacing it.

This makes the transmitter suitable for TANSUN radio dimmer setups where you want to set the heating power wirelessly in fixed steps and operate several dimmers at the same time. Four channels and synchronous control are the key selection criteria.

Features Tansun 4-Channel Remote Control

  • 4-channel radio remote control for operating TANSUN radio dimmers
  • Synchronously controls one or more dimmers within radio range
  • Three-level control at 33%, 66% and 100%
  • On/off function
  • Radio range of approx. 20 m
  • 868.3 MHz radio transmission with FSK modulation
  • Individually coded transmitter
  • Powered by a CR2032 lithium battery

Technical Data

  • Channels4
  • Carrier frequency868.3 MHz
  • ModulationFSK
  • Radiated apparent power-3 to 1 dBm
  • Apparent power of harmonics< -54 dBm (< 4 nW)
  • Power supply3 V ± 10 %
  • Battery typeCR2032 lithium battery
  • Current consumption during transmission12 mA
  • Operating temperature-10 to +55 °C
  • Protection ratingIP55

Manuals for Tansun Remote Control 4 Channel

pdf icon Tansun Fernbedienung 4 Kanal - User Manual - DE - EN - IT - FR - ES
Responsible company
TEL GmbH
Moltkestr. 25
42799 Leichlingen
Germany
info@tel-gmbh.com
+49 (0) 2175 - 98195

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Excellent

Good

Satisfying

Acceptable

Unsatisfactory

Please enter at least 5 characters.
At least 8 characters

Fields marked with asterisks (*) are required.

Skip product gallery
easylight leuchtstabe 50 stuck
Easylight Snaplight (50 pieces)

At events and celebrations, coloured glow sticks add a visible accent without the need for a power supply. The Easylight glow sticks come in a pack of 50 and each glow for 8 to 12 hours. At 140 mm long and 12 mm in diameter, the sticks are easy to distribute or hold in your hand. They are available in red or purple and are suitable for decorative lighting effects at parties and events. Features Easylight Glow Sticks - 50 Pieces Glow sticks for colourful accents at parties and events 50 pieces per pack Available in red or purple Glow duration of 8 to 12 hours Technical specifications Length140 mm Diameter12 mm Glow duration8–12 hours Scope of delivery Easylight glow sticks - 50 pieces, glow sticks

€58.00
Available immediately
Details
jbl polo shirt beige gr e l58eac7903724059a983283fd6e
JBL Polo-Shirt - Large

Size: L Color: Beige

€25.00
Available immediately
Details
vestax vhs extravaganz 2000 t vol 2 cover left angle58eae0d023f6c5a438e7a8e0dc
Vestax VHS Extravaganz 2000 T Vol. 2

As a VHS-format videocassette, this release is aimed at anyone who wants to watch or collect Vestax material on a suitable VHS deck. Vestax VHS Extravaganz 2000 T Vol. 2 is the second instalment in the series; no further details about the video content are provided. Features Vestax VHS Extravaganz 2000 T Vol. 2 VHS videocassette for playback on a VHS deck Second instalment in the “Extravaganz 2000 T” series

€19.00
Available immediately
Details
vestax vhs extravaganz 1998 cover left angle58eae13ab1a825a438ddde4ccc
Vestax VHS Extravaganz 1998

For playback on a suitable VHS deck, the Vestax VHS Extravaganz 1998 is designed as a video cassette in the analogue VHS format. It is suitable for Vestax collectors and enthusiasts of historic DJ media. Features Vestax VHS Extravaganz 1998 VHS video cassette for playback on a VHS deck Vestax edition with the year 1998 Technical specifications FormatVHS

€19.00
Available immediately
Details
magicfx electric konfetti kanone streamers 80cm light blue
MagicFX Electric Konfetti Cannon - Streamers - 80cm - Light Blue

A targeted streamer effect can be incorporated into a show sequence with this electric cannon. The 80 cm-long streamer cannon from MagicFX fires light blue streamers up to 12 metres and is designed for compatible FX launchers. To use it, insert the cannon into a compatible device and trigger the shot there. Compatible with six MagicFX devices, it works with Deejay Shotgun, Power Shot 1, Powershot II, Shot Base DMX, Confetti Pistol and Confetti Gun, among others. The streamers are made of tissue paper and are certified to DIN 4102-1 Class B1. Weighing 0.55 kg, the cannon is suitable for events where a light blue streamer burst with a range of up to 12 metres is required. Features MagicFX Electric Confetti Cannon - Streamers - 80cm - Light Blue Electric streamer cannon for use with compatible FX launchers Light blue tissue paper streamers Range of up to 12 metres 80 cm long Triggered via a compatible FX hardware device Fire-retardant in accordance with DIN 4102-1 Class B1 Compatible with MagicFX Deejay Shotgun, Power Shot 1 and Powershot II Compatible with MagicFX Shot Base DMX, Confetti Pistol and Confetti Gun Technical Data Product typeElectric streamer cannon MaterialTissue paper ShapeStreamers ColourLight Blue RangeUp to 12 m Fire protectionDIN 4102-1 Class B1 Compatible hardwareMagicFX Deejay Shotgun | MagicFX Power Shot 1 | MagicFX Powershot II | MagicFX Shot Base DMX | MagicFX Confetti Pistol | MagicFX Confetti Gun Manufacturer's part numberES04LB Weight0.55 kg

€19.00
Available immediately
Details
urei t shirt langarm grau schwarz xl58ead4b763a0859a9814d7e7db
Urei Longsleeve - XL

A very stylish and unique Urei long-sleeve T-shirt - with the logo of Urei printed on the right arm and on the hem of the T-shirt. Size: XL Color: Grey-black

€18.00
Available immediately
Details
magicfx electric konfetti kanone streamers 80cm yellow
MagicFX Electric Konfetti Cannon - Streamers - 80cm - Yellow

For a targeted streamer effect at shows and events, the MagicFX Electric Konfetti Kanone – Streamers – 80cm – Yellow is electrically triggered. According to the product listing, the 80 cm cannon shoots the yellow streamers up to 12 metres and is suitable for compatible MagicFX effect machines. To use it, insert the cannon into a supported machine and activate its trigger. It is compatible with the MagicFX Deejay Shotgun, Power Shot 1, Powershot II, Shot Base DMX, Confetti Pistol and Confetti Gun. It is triggered by the effects hardware; it is not described as a standalone handheld device. The streamers are made of tissue paper and are certified to DIN 4102-1 Class B1. This makes the yellow 80 cm cannon suitable for setups where you want to use an electric streamer effect with a specified level of fire safety and the MagicFX devices listed above. Features MagicFX Electric Konfetti Kanone - Streamers - 80cm - Yellow Electric streamer cannon for compatible MagicFX effect machines 80 cm length Firing distance up to 12 m Yellow streamers made of tissue paper Fire safety certification to DIN 4102-1 Class B1 Compatible with MagicFX Deejay Shotgun and Power Shot 1 Compatible with MagicFX Powershot II and Shot Base DMX Compatible with MagicFX Confetti Pistol and Confetti Gun Technical Data Manufacturer's part numberES04YL MaterialTissue paper ShapeStreamers ColourYellow Compatible hardwareMagicFX Deejay Shotgun | MagicFX Power Shot 1 | MagicFX Powershot II | MagicFX Shot Base DMX | MagicFX Confetti Pistol | MagicFX Confetti Gun Firing distanceup to 12 m Length80 cm Weight0.55 kg

€18.00
Available at short notice
Details
magicfx electric konfetti kanone streamers 80cm red
MagicFX Electric Konfetti Cannon - Streamers - 80cm - Red

A red streamer effect can be triggered with this electric 80 cm cannon via compatible FX hardware. The MagicFX Electric Konfetti Kanone – Streamers – 80cm – Red fires tissue paper streamers up to 12 metres and is certified to DIN 4102-1, Class B1. To use it, insert the cannon into a compatible device and trigger the effect there. Compatible models include the MagicFX Deejay Shotgun, Power Shot 1 and Powershot II, as well as the Shot Base DMX, Confetti Pistol and Confetti Gun. With its red colour and specified weight of 0.55 kg, the streamer cannon is suitable for stage and DJ effects at events. It works with setups featuring one of the MagicFX launchers listed above and combines an 80 cm length with a specified firing range of up to 12 metres. Features MagicFX Electric Konfetti Kanone - Streamers - 80cm - Red Electric streamer cannon for firing streamers with compatible FX hardware Firing range of up to 12 m Certified to DIN 4102-1, Class B1 Compatible with the MagicFX Deejay Shotgun, Power Shot 1, Powershot II, Shot Base DMX, Confetti Pistol and Confetti Gun Technical specifications MaterialTissue paper FormStreamers ColourRed Manufacturer's part numberES04RD Firing rangeup to 12 m Length80 cm Weight0.55 kg

€18.00
Available immediately
Details
Skip product gallery
synq se 1100 2
Synq SE-1100

In mobile PA racks, alongside output power, the amount of space and weight taken up by the power amplifier also matters. The Synq SE-1100 is a two-channel Class-D power amplifier in a 1.5U format for PA systems, clubs, theatres and hire companies. It delivers up to 2 × 550 W RMS at 4 ohms in stereo mode and weighs 3.85 kg. You can choose between stereo, mono and bridge modes. In stereo mode, both channels operate separately. In mono mode, the input signal is internally routed to both channels; the left input alone is sufficient. For more power to a single speaker, bridge mode combines both channels into one mono output with 1,100 W RMS at 8 ohms. In mono and bridge modes, you control the level using the left volume control. Balanced XLR inputs and outputs are available for the signal path. The inputs receive the signal, while the XLR outputs can pass it on to another power amplifier. The input sensitivity can be set to 0.7 V, 1 V or 1.4 V. You can connect speakers via two Speakon-compatible outputs for the channels or the separate bridge output. Signal and current limiters, as well as protection circuits against overload, short circuit, DC faults, overheating, AC and VHF, are included. Signal, Clip and Protect LEDs indicate the input signal, high output level and protection status. The Class-D power amplifier achieves an efficiency of over 90 per cent; a variable-speed fan dissipates the resulting heat. Unobstructed ventilation is therefore important when installing it in a rack or flight case. With a depth of 215 mm and a weight of 3.85 kg, the SE-1100 is suitable for mobile PA racks as well as fixed 19-inch installations. The selectable operating modes, XLR signal paths and power ratings help you match it to passive speakers and the setup in question. Features Synq SE-1100 Two-channel Class-D power amplifier for PA and sound reinforcement applications Stereo mode with 2 × 300 W RMS at 8 ohms or 2 × 550 W RMS at 4 ohms Bridge mode with 1 × 1,100 W RMS at 8 ohms Mono mode with combined inputs and signal feed via the left input Independently adjustable channels in stereo mode; level control via the left knob in mono and bridge modes Selectable input sensitivity of 0.7 V, 1 V or 1.4 V Balanced XLR inputs and XLR outputs for passing on the signal Two Speakon-compatible speaker outputs for left and right, plus a separate bridge output Signal and current limiters Protection circuits against overload, short circuit, DC faults, overheating, AC and VHF Status indicators for power, signal, clip and protection circuit Variable-speed fan 19-inch rack installation with 1.5U Low heat generation and over 90 per cent efficiency Technical Specifications Amplifier classD Channels2 Stereo power at 8 ohms2 × 300 W RMS Stereo power at 4 ohms2 × 550 W RMS Bridged power at 8 ohms1 × 1,100 W RMS Mono power at 8 ohms2 × 300 W RMS Mono power at 4 ohms2 × 550 W RMS Measurement conditions for power ratings1 kHz, THD+N < 0.1 % Frequency range20–20,000 Hz (±1 dB) Input sensitivity0.7 V | 1.0 V | 1.4 V Balanced input impedance20 kΩ Unbalanced input impedance10 kΩ Signal-to-noise ratio> 103 dB (A-weighted) Damping factor> 400 (8 ohms, 1 kHz) Slew rate40 V/µs Efficiency> 90 % CoolingVariable-speed fan Connectionsbalanced XLR inputs and outputs | 2 Speakon-compatible speaker outputs | 1 bridge output Power supply200–240 V AC, 50 Hz Power consumption1,200 W (maximum peak) Rack format19 inches | 1.5U Weight3.85 kg Dimensions (W x D x H)482 x 215 x 66 mm Scope of Delivery Synq SE-1100 Class-D power amplifier Power cable User manual

€339.00 €429.00 (20.98% saved)
Available immediately
Details
audiophony atom15a 1
Audiophony Atom15A

When a microphone and playback device are to be connected directly to the speaker, separate level controls and suitable inputs are particularly useful. The Audiophony Atom15A is an active 15-inch full-range speaker with bi-amping and DSP; it is suitable for mobile sound reinforcement, DJ sets and speech. Two independently adjustable input channels make it easy to operate without an additional mixer. Channel one has a combo input for XLR or jack, which can be adapted to microphone or line signals using the MIC/LINE switch. Channel two accepts line signals via RCA or a 3.5 mm stereo jack. You can adjust the levels separately for each channel. A balanced XLR line output passes the summed input signals on to an active speaker or another sound system. You can adjust the levels of the microphone and playback device separately directly on the unit. The integrated DSP offers the Normal, Live, Club and Speech sound presets, as well as position filters for stand, monitor and wall-mount use. Bass and treble can each be adjusted from −10 to +10 dB. The display and control knob are used to select and confirm menu items; you can also configure the front LED, reset the settings and view the software version. DSP adjustment for sound and placement helps you set up the speaker for the intended application. The cabinet houses a 15-inch woofer with a 3-inch voice coil and a 1.35-inch compression driver. The amplifiers deliver 350 W RMS of Class D power to the low-frequency range and 50 W RMS of Class AB power to the high-frequency range. The cabinet can also be positioned as a stage monitor; the 35 mm stand mount offers positions with 0° and 7.5° of tilt. Monitor use with two stand angles complements the mounting options provided by the M10 threaded inserts. With carrying handles on the top and side, as well as rubber feet, the speaker is designed for transport and mobile setup. Short-circuit and overheating protection, along with a limiter, are also included. This makes the Atom15A a suitable choice for DJ, live and speech sound reinforcement when you are looking for an active 15-inch speaker with direct source connections, DSP and options for stand, monitor or permanent installation. For mobile and permanently installed PA setups, several positioning and connection options are available. Features Audiophony Atom15A Active 15-inch full-range speaker for DJ, live and speech sound reinforcement Bi-amping with a Class D amplifier for the low-frequency range and a Class AB amplifier for the high-frequency range Integrated DSP with Normal, Live, Club and Speech sound presets Position filters for stand, monitor and wall-mount use Adjustable bass and treble, each from −10 to +10 dB One MIC/LINE combo input for XLR or jack with MIC/LINE switch Line input via RCA or 3.5 mm stereo jack Two separate level controls for the input channels Balanced XLR line output for passing on the summed signals 35 mm stand mount with positions for 0° and 7.5° of tilt M10 threaded inserts on the top and rear Monitor-compatible cabinet design with 45° side panels Carrying handles on the top and side, as well as rubber feet Display and control knob for DSP operation; LED configuration, reset and software version display Short-circuit and overheating protection, as well as a limiter Technical specifications Total power400 W RMS | 1600 W dynamic Amplifiers350 W RMS Class D for low frequencies | 50 W RMS Class AB for high frequencies Frequency range45 Hz–20,000 Hz Crossover frequency3.4 kHz Dispersion angle (H x V)90° x 60° Maximum sound pressure level124 dB Woofer15 inches | 3-inch voice coil | 4 ohms | 350 W AES Tweeter1.35-inch compression driver | 8 ohms | 50 W RMS Inputs1 MIC/LINE combo XLR/jack | 1 line input via RCA or 3.5 mm stereo jack Output1 balanced XLR line output Stand mount35 mm | 0° and 7.5° Mounting2 M10 threaded inserts on top | 1 M10 threaded insert at the rear Power supplySwitched-mode power supply (SMPS) Weight20.6 kg Dimensions (W x D x H)728 x 425 x 415 mm

€519.00 €649.00 (20.03% saved)
Available at short notice
Details
tansun bt control box
Tansun BT-Control Box

If an infrared heater is not meant to run at full power all the time, a dimmer lets you adjust the heat output to suit your needs. The Tansun BT-Control Box controls heaters with a total output of up to 3 kW and is designed for infrared heating systems. You can operate it using the included remote control or a free app for iOS and Android. The app lets you control multiple Bluetooth dimmers individually. The remote control operates all Tansun Bluetooth dimmers within range together; if you want multiple heaters to respond separately, use the app. Heaters from other brands can also be connected, provided the heating element is dimmable and the unit does not have an integrated control system or a soft starter. The box is protected against dust and water jets in accordance with IP65 and is specified for operation at approximately -20 °C to +40 °C. With a 230-volt connection and a control capacity of up to 3 kW, the dimmer is suitable for setups where you want to adjust the heat from an infrared heater using a remote control or smartphone. The separate app control of multiple devices is particularly practical when individual heating areas need to be adjusted independently. Features Tansun BT-Control Box Bluetooth dimmer for controlling infrared heaters Designed for a total output of up to 3 kW Controlled via a free app for iOS and Android Multiple dimmers can be controlled individually via the app Included remote control operates all Tansun Bluetooth dimmers within range together Also suitable for heaters from other brands if the heating element is dimmable and there is no integrated control system or soft starter IP65 protection rating Technical specifications Operating voltage230 V AC Maximum control capacity3 kW OperationRemote control | App Operating temperatureapprox. -20 °C to +40 °C Protection ratingIP65 Scope of delivery Tansun BT-Control Box Bluetooth dimmer Remote control

€195.00
Available at short notice
Details
technics dj bag black
Technics DJ-Bag

The Technics DJ-Bag is the perfect combination of style and practicality for DJs and vinyl enthusiasts. This high-quality bag is impressive not only for its iconic Technics logo, prominently displayed on the front, but also for its well-thought-out design. With a capacity of up to 60 LPs, it offers sufficient space for your vinyl collection or your DJ equipment. Thanks to the sturdy, removable plastic insert, the bag maintains its shape at all times and offers additional protection for your valuable records. The practical shoulder strap ensures a high level of comfort, even when the bag is fully loaded. Available in many fashionable colours, the Technics DJ-Bag is not just a useful accessory but also a real eye-catcher at any gig or event. Another special feature is the side pocket, which offers additional storage space for smaller items such as headphones, adapters, or cables. Whether you are on your way to your next gig or want to store your collection securely – this bag is ideally suited for every situation. Features Technics DJ-Bag Stylish and functional record bag for DJs Capacity: approx. 60 LPs Available in various fashionable colours Practical and adjustable shoulder strap Removable, sturdy plastic insert for optimal protection and shape stability Printed Technics logo on the front Additional side pocket for accessories Technical specifications Width365 mm Depth180 mm Height305 mm Weight1.15 kg

€49.00 €59.00 (16.95% saved)
Available immediately
Details
tansun rio grande ip 1x2 kw schwarz58eae332ba95659b7a184505b9
Tansun Rio Grande IP

Under awnings and parasols, heat can be directed precisely where people are seated. The Tansun Rio Grande IP is a weatherproof infrared heater with 2,000 watts of power, designed for indoor and outdoor use and delivering heat without any preheating time. The unit is suitable for wall mounting and attachment to parasols; ceiling mounting is not intended. When installing it under an awning or parasol, you should take the recommended mounting height of 2.1 to 2.6 m into account. The actual heating area depends on the mounting situation; up to 12 m² is specified for wall mounting. The rust-resistant aluminium housing, polished reflector and Dr. Fischer HeLeN technology form the basis of the heating system. A protective grille is fitted as standard. The IP55 protection rating identifies this weatherproof unit as suitable for outdoor use. The manufacturer describes the HeLeN technology as “made in Germany”; the model is TÜV-tested. Various colour options are available; additional RAL colours are possible. The connection includes a 3 m cable with plug. With its compact housing and weight of 2.8 kg, the heater is suited to setups where a single 2 kW heating element is intended for a patio, catering area or covered seating area. Features Tansun Rio Grande IP Infrared heater for indoor and outdoor use 2,000 W heating power with instant heat and no preheating Weatherproof aluminium housing made from rust-resistant material IP55 protection rating Polished high-performance reflector Dr. Fischer HeLeN technology, “made in Germany” Protective grille integrated as standard Suitable for wall mounting and parasols Not intended for ceiling mounting Recommended mounting height: 2.1 to 2.6 m Heating area for wall mounting: up to 12 m², depending on the mounting situation Available in various colours; additional RAL colours possible TÜV-tested 3 m connection cable with plug Technical data Heating power2,000 W Voltage230 V Phases / circuit protection1 phase / 16 A Protection ratingIP55 Recommended mounting height2.1 to 2.6 m Heating area for wall mountingup to 12 m² Weight2.8 kg Dimensions (W x D x H)560 x 160 x 112 mm Scope of delivery Tansun Rio Grande IP infrared heater 3 m connection cable with plug

€493.00
Available immediately
Details
Topseller
yamaha hs8
Yamaha HS8

Precise monitoring starts with a loudspeaker that reproduces signals honestly. Yamaha HS8 is an active 2-way bass reflex nearfield monitor designed for clear, balanced playback and reveals details in the mix you can rely on. The 8-inch woofer works together with a 1-inch dome tweeter in a cleanly tuned Bi-Amp system. This creates a sound image that reaches deep down, stays differentiated in the mids and sounds controlled even in the high frequencies. The distinctive design with the white cone is also part of the series—it's been closely associated with it for years. Clarity without colouring This studio monitor is made to reproduce material as it actually is. Newly developed transducers ensure balanced signal reproduction across a wide frequency range. This helps you when mixing, producing and judging recordings, because vocals, transients and low-end content are not artificially emphasised, but presented in a way you can understand.Especially during long sessions, this direct tuning is an advantage. You hear faster where an arrangement works, where frequencies overlap and at what point an adjustment in the mix is really needed. Bi-Amp with clean separation Inside, a 75W LF- plus 45W HF Bi-Amp system is at work, with the high and low drivers each powered by their own power amplifier. This design improves control over the individual frequency ranges and contributes to a linear, high-resolution sound image. For you, that means better overview of level relationships, dynamics and the stereo image.The crossover frequency of 2 kHz is tuned so that both drivers work together cleanly. The result is a closed sound image that does not try to be spectacular, but instead remains reliable. Enclosure with a focus on quiet Here, Yamaha relies on an MDF enclosure with good damping properties to keep unwanted resonances as low as possible. That's exactly crucial in the studio, because colourations caused by the enclosure make any assessment harder. The bass reflex port has also been specifically optimised to reduce air turbulence at the openings and minimise disturbing side noise in the bass range. Adaptable to your room Not every workstation sounds the same. That's why this model with ROOM CONTROL and HIGH TRIM offers two practical options for adjusting the sound. Overemphasised bass when placed close to a wall can be controlled, while the high-frequency reproduction can be adapted to the room and your setup. This is especially helpful when working in small control rooms, home studios or environments that are not acoustically perfectly treated. Who is the Yamaha HS8 for? This model is a strong choice for anyone who needs more control and more depth when monitoring than you get from smaller nearfield monitors. Exactly right for ambitious producers, recording setups, project studios and advanced users who want to evaluate mixes in a well-founded way. The loudspeaker also plays to its strengths when editing, sound design and working with detailed arrangements. Suitable for mixing, production and critical listening Useful if you're looking for an 8-inch monitor with a powerful low-end foundation Well suited for fixed studio setups with an audio interface, mixing desk or controller A solid solution for entry-level users with ambition and for experienced users focused on precision Features Yamaha HS8 Active 2-way bass reflex nearfield monitor for precise and reliable work in the studio 8-inch cone woofer and 1-inch dome tweeter for clear lows, defined midrange and clean highs Wide frequency range for accurate monitoring and detailed reproduction Bi-Amp system with separate power amplifiers for the high and low drivers 75 W LF plus 45 W HF power amplification for a total output power of 120 W Specifically designed MDF enclosure for reducing unwanted resonances Optimised bass reflex port with reduced air turbulence and less extraneous noise ROOM CONTROL and HIGH TRIM for adapting to different room acoustics XLR and 6.3 mm jack inputs for balanced and unbalanced signals Classic series design with distinctive white cone Technical specifications Type Active 2-way bass reflex studio monitor Frequency range 38 - 30,000 Hz (-10 dB) Drive units 8-inch cone woofer | 1-inch dome tweeter Crossover frequency 2 kHz Power 120 W | LF: 75 W | HF: 45 W Connections XLR3-31 balanced | 6.3 mm jack balanced Power consumption 60 W Enclosure Bass reflex Material MDF Weight 10.2 kg Dimensions (W x D x H) 250 x 334 x 390 mm What's in the box Yamaha HS8 active nearfield monitor Power cable Operating instructions

€277.00 €416.00 (33.41% saved)
Available immediately
Details
tansun sorrento triple ip 3x1 5 kw schwarz58eae346342ad59b6b0079be4f
Tansun Sorrento Triple IP

High ceilings and open areas are difficult to heat effectively with a single infrared heater. The Tansun Sorrento Triple IP is designed for larger commercial and industrial spaces and, according to the product information, covers up to 22 m² of heating area. Its three heaters deliver warmth without any preheating time. The unit can be mounted on a wall or ceiling and is designed for a recommended installation height of 3 to 4.5 m. The high-performance reflectors focus the heat output; the instant heat without preheating is particularly practical when areas are not in continuous use. The housing is made of rust-free aluminium and is weatherproof. This makes the heater suitable for outdoor use as well. The Dr.-Fischer-HeLeN technology used is manufactured in Germany; its service life is specified as up to 6,000 hours. With its three 3 m cables with plugs, the heater can be connected without having to arrange suitable cables separately. TÜV testing and the weatherproof housing are important features for commercial installations. The model is suitable for large rooms and outdoor areas where wall or ceiling mounting at the appropriate height is possible. Features Tansun Sorrento Triple IP Infrared heater for larger commercial and industrial spaces Heating area up to 22 m² Wall or ceiling mounting Recommended installation height of 3 to 4.5 m Heat output without preheating Weatherproof, rust-free aluminium housing Polished high-performance reflectors Dr.-Fischer-HeLeN technology, made in Germany TÜV-tested Service life up to 6,000 hours Includes three 3 m cables with plugs Technical data Heating areaup to 22 m² Recommended installation height3–4.5 m Service lifeup to 6,000 hours Weight8 kg Dimensions (W x D x H)1202 x 323 x 228 mm Scope of delivery Tansun Sorrento Triple IP infrared heater 3 x 3 m cables with plugs

€989.00 €1,099.00 (10.01% saved)
Available immediately
Details
tansun st tropez ip 1x1 5 kw silber58eae34d14cd059b6ae1a1ef1d
Tansun St. Tropez IP

A patio or covered area needs a patio heater that provides warmth without brightly illuminating the space. The Tansun St. Tropez IP is an electric infrared heater for areas of up to 9 m². Its OSRAM Blackstar tube with gold reflector reduces light output by 90 per cent according to the product information; heat is available without any preheating time. The rust-resistant aluminium housing is weatherproof. Polished reflectors help radiate the heat. The recommended installation height is between 2.1 and 2.6 m, allowing you to adapt the installation to the space. The heater is connected via a 3 m cable with plug. With an output of 1.5 kW and an IP55 rating, this model is suitable for outdoor use, provided you follow the installation and safety instructions. With its compact design, low light output and specified heating area, the St. Tropez IP is suitable for patios and outdoor areas where targeted instant warmth is required. Features Tansun St. Tropez IP Electric infrared heater for patios and outdoor areas Instant warmth without preheating OSRAM Blackstar tube with gold reflector technology and reduced light output Polished high-performance reflectors Robust, rust-resistant aluminium housing Weatherproof design, IP55 rating 3 m connection cable with plug Recommended installation height: 2.1–2.6 m Heating area: up to 9 m² Technical specifications Output1.5 kW Protection ratingIP55 Weight2.8 kg Dimensions (W x D x H)560 x 160 x 112 mm Scope of delivery Tansun St. Tropez IP infrared heater 3 m connection cable with plug

€399.00
Available immediately
Details
This website uses cookies to ensure the best experience possible. More information...