The Yamaha StagePas 400BT is the perfect solution for professional sound in smaller venues. Whether you're a speaker, singer-songwriter, or in a band, the StagePas 400BT offers you a comprehensive PA solution in one device. The StagePas 400BT features 2-band EQ on each channel. It provides four microphone/line inputs with XLR jacks, phantom power on channels 1-2, and 1/4" XLR combo inputs on channels 3-4, offering versatile connectivity. Additionally, there are two switchable stereo line inputs and support for RCA and 1/8" stereo mini inputs. Monitor and subwoofer outputs allow for easy expandability. For performances that require a monitor mix or extended bass, you can simply connect powered speakers like Yamaha's DXR Series or DXS subwoofers. Thanks to the Bluetooth connectivity of the StagePas 400BT, you can effortlessly integrate backing tracks, loops, intermission music, or even software instruments into your live setup without the hassle of cables. The audio is transmitted to channels 7/8 of the StagePas 400BT mixer, providing a range of up to 10 meters. The StagePas 400BT is lightweight and portable. It consists of two lightweight speakers, a detachable powered mixer, a speaker cable, and a power cable. This gives you a complete portable sound reinforcement solution that you can easily set up in almost any environment. The mixer can also fit into one of the speaker enclosures, making transportation easier and reducing the footprint during use. With advanced Yamaha technologies, the StagePas delivers excellent sound quality without complications. The built-in feedback suppression targets problematic frequencies before they become audible. The Yamaha Master EQ, controlled by a single knob, optimizes the audio to suit the environment. Channels 1-4 are equipped with independent sends for four high-quality reverb effects (Hall, Plate, Room, and Echo), derived from Yamaha's renowned SPX series effects processors. You can also optionally turn the reverb on and off using a footswitch, which is perfect when the host speaks between songs. The StagePas 400BT delivers 400 watts of power, ensuring clear audibility in smaller venues. Intelligent DSP technology and advanced limiters protect the system and ensure efficient power usage. Features Yamaha Stagepas 400BT 400W (200W + 200W) Output power High-quality speakers (LF: 8-inch woofer / HF: 1-inch voice coil driver) Removable 8-channel mixer (4 mono/line + 4 mono / 2 stereo/line) Bluetooth® audio streaming 1-Button Master EQ? with virtual bass boost High-resolution digital SPX reverberation effects (4 types, parameter control) Internal feedback suppression Great sounding channel EQ (2 bands) Switchable inputs stereo/mono Hi-Z instrument inputs for high impedance instruments (e. g. electric guitars) phantom powering Two monitor outputs, one subwoofer output Optional Hall footswitch Technical data Speaker type: 2 way bass reflex Frequency range: 55 - 20.000 Hz Woofer: 8 inch Tweeter: 1 inch Max. SPL: 125 db Power consumption: 30 W standy | 70 W (1/8 power) Weight: 18.3 kg complete | 7.7 kg per speaker | 2.9 kg mixer Dimensions (W x D x H); 289 x 275 x 472 mm Scope of delivery Yamaha Stagepas 400BT System Cover panel Power cable (2 m) 2x speaker cable (6 m) 12x non-slip pads 2x ferrite cores 2x cable ties

The Yamaha StagePas system combines high-quality audio technology with ease of use and portability. This versatile PA system is perfect for musicians, speakers, and small events that prioritize clear, professional sound. With the wireless Bluetooth connectivity, you can stream your music directly from a smartphone or laptop without needing additional cables. This makes integrating playbacks, background music, or interactive media particularly convenient. The combination of two compact speakers and a removable mixer allows for quick setup in almost any environment. The mixer can be conveniently stored in one of the speaker enclosures, making transport and setup much easier. Despite its lightweight design, the system delivers impressive sound quality that even satisfies demanding listeners. Yamaha uses advanced technologies in this system to ensure an interference-free audio experience. The automatic feedback suppression eliminates unwanted noises before they occur, while the integrated equalizer optimizes the sound to suit the room acoustics. Additionally, you can refine your performance with the high-quality hall effects, whether you're performing as a singer, instrumentalist, or speaker. With a high output of 680 watts, the system ensures that your sound remains clear and penetrating even in larger rooms. The option to connect monitors or subwoofers gives you additional flexibility if your needs grow. Yamaha has designed this PA system to appeal to both beginners and professionals looking for a reliable and versatile sound system. Features Yamaha Stagepas 600BT Portable PA system for musicians, speakers, and small events 680 watts of total power for clear and powerful sound reproduction Wireless Bluetooth streaming for music and backing tracks Lightweight speakers with integrated power mixer Compact design with practical storage for the mixer Automatic feedback suppression for interference-free performance Simple sound control via integrated 3-band equalizer High-quality SPX hall effects (4 types) for professional sound enhancement Connection options for monitors and subwoofers for system expansion Hi-Z instrument inputs for high-impedance instruments (e.g., electric guitars) One-knob Master EQ™ with virtual bass boost Phantom power for microphones Robust design for reliable use on the go Technical Specifications Design: Two-way bass reflex speakers Power: 680 watts dynamic (340 W + 340 W), 560 watts continuous (280 W + 280 W) Speaker components: Woofer: 254 mm Tweeter: 35.6 mm voice coil compression driver Frequency range: 55 Hz – 20 kHz (-10 dB) Mixer: 10 channels (4 mono/line, 6 mono or 3 stereo/line) Inputs: 4 XLR/line combo jacks Hi-Z switch for channel 4 Stereo/mono switch for channels 5/6 to 9/10 RCA and 3.5 mm stereo inputs Outputs: Speaker outputs (L/R) Monitor outputs (L/Mono, R) Subwoofer output (Mono) Bluetooth: Version 4.1, range about 10 m Weight: Speaker: 10.5 kg each Mixer: 4.3 kg Power supply: 100 – 240 V, 50/60 Hz Power consumption: 35 W (standby), 100 W (1/8 load) Pole-mount: 35 mm with StageLok™ flange Complete weight: 25.6 kg Dimensions per speaker (W x D x H): 335 x 319 x 545 mm Package Contents Yamaha Stagepas 600BT Cover panel Power cable (2 m) 2x speaker cables (6 m) 12x non-slip pads 2x ferrite cores 2x cable ties

Portable 6.5" PA with UHF radio receiver, audio player, Bluetooth and 40W RMS Set contains 1x Omnitronic WAMS-65BT Wireless PA System 1x Battery 12V/2900mAh W.A.M.S.-05 Features Omnitronic Set WAMS-065BT Compact, all-in-one amplifier system for mobile use Ideal for all off-grid and wireless applications such as sports events and presentations 4-channel power mixer with 40 watts of power 2-way bass reflex system with 16 cm woofer (6.5") Highly efficient and battery-saving Class D amplifier MP3 player with Bluetooth receiver and IR remote control SD card slot and USB port Wireless music transfer from your music devices (e.g. smartphone, tablet PC) via Bluetooth Integrated UHF radio receiver with matching hand-held microphone Mains operation or battery operation for up to 4 hours of music enjoyment Integrated automatic charger Battery sold separately (E0055612) 1 microphone input (XLR) with adjustable reverb effect 1 line input (cinch) Tone controls and master controls Link output for another active box Operation of the handheld microphone via two AA batteries (not supplied) Lightweight black plastic housing with metal protective grille Mounting flange for tripod mounting Free of registration and fees in the EU On/Off/Mute switch: On/Off/Mute switch Microphone Control: IR remote control MP3 player Technical data Power supply: 100-240 V AC, 50/60 Hz or 12 V DC via rechargeable battery Battery: 12 V DC, 2900 mAh Operating time: 4 hours Charging time: 4-6 hours Amplifier power: 40 W RMS Speakers: 16 cm woofer (6.5"), 2.5 cm tweeter (1") Inputs: Mic (XLR), Line (Stereo Cinch) Output: Line (6.3 mm jack) Threshold value: <0.5%. Audio player: Bluetooth, USB devices and SD(HC) cards Radio microphone: Carrier frequency: 865 MHz Frequency stability: ±0.005 %. RF output power: 10 mW Polar pattern: cardioid Range: approx. 30 m Battery: 2 x 1.5 V Mignon, type AA Battery life: 13 hours Total connected load: 60 W Size of the woofer: 17 cm (6,5") Frequency range: 62 - 18000 Hz Weight: 4 kg Dimensions (L x W x H): 218 x 235 x 348 mm

With the new Yamaha Stagepas 200 you get a small, compact and absolutely mobile PA sound system that leaves nothing to be desired. The system is driven by a Class-D bi-amp with a maximum power of 180 watts. An 8 inch woofer and a 1.4 inch tweeter provide a maximum sound pressure level of 125 dB. The Stagepas 200 is thus ideally suited for conferences, entertainers, weddings or other flexible application scenarios. With very compact dimensions of 30 cm at each edge and an integrated carrying handle, the system is ready for any mobile use. In addition to the extensive connection options with various XLR/jack combo inputs, the system also offers an integrated 5-channel digital mixer, so that the sound can be quickly and easily adjusted directly on the unit for each channel. At the same time, each channel offers an integrated effects section with reverb, chorus and delay, as well as Yamaha's clever 1-button EQ/preset solution that lets you tweak the sound with just one knob. In addition to operation directly on the unit, Yamaha's iOS/Android app STAGEPAS Controller is also available for free download from the app stores, allowing all settings to be conveniently made on a smartphone or tablet and can also be saved as a preset. The system also supports Bluetooth streaming with current 5.0 standard. With the included rubber feet, the flexibility of the system is further increased by the fact that the system can be placed at an angle of 30° or 60°. Mounting on a tripod is also possible due to the integrated 35mm tripod flange. The Stagepas 200 BTR comes with a rechargeable battery pack that allows up to 10 hours of playback and charges in about 4 hours. Features Yamaha Stagepass 200 BTR Professional portable PA system with rechargeable battery for mobile applications 180 Watt Class-D amplifier 8 inch woofer and 1.4 inch tweeter Max. SPL of 125 dB ensures high volumes without distortion Integrated 5-channel digital mixer DSP with reverb, delay, chorus and EQ Bluetooth audio streaming Stagepas Controller Remote app for iOS and Android for easy operation from a smartphone or tablet Can be set up at 30 and 60 degree tilt angles Battery operation possible for up to 10 hours (battery pack included) Carrying handle for easy transport Technical data Amplifier: Class-D | 180 W peak | 100 W RMS Frequency response: 60 to 20,000 Hz Coverage angle: 90 x 90 degrees Crossover frequency: 2000 Hz Max. SPL: 125 dB Power consumption: 10 W (idle) | 20 Watt (1/8 power) Woofer: 8 inch cone | 2 inch coil Tweeter: compression driver with 1 inch horn aperture | 1.4 inch voice coil Enclosure: ABS Bluetooth: Version 5.0 | A2DP (SBC, AAC) AD/DA: 24 bit | 48 kHz Battery: Lithium-ion | 2700 mAh | 0.53 kg Charging time: approx. 4 hours Max. Operating time: approx. 10 hours at 1/16 power Weight: 12 kg (without battery) Dimensions (W x D x H): 300 x 301 x 307 mm Scope of delivery Stagepas 200 PA system 1x BTR-STP200 battery pack 1x power cable User manual

Are you a mobile DJ or solo entertainer or do you need a small PA for your band? The Combo-160BT is the ideal all-in-one PA system for mobile live and DJ applications. Thanks to its well thought-out design, it is particularly practical and easy to carry. The system includes two full-range speakers, each equipped with a 20cm woofer and a 2.5cm tweeter, as well as a bass reflex system. In addition, there is a middle section with carrying handle to which the two speakers can easily be attached for transport. This middle section also houses the 6-channel power mixer. Two mono inputs (mic/line) with 2-band EQ and adjustable reverb and one stereo line and one stereo AUX input are available as connections. You can also connect your smartphone to the system via Bluetooth, for example, and play music wirelessly. An optional USB dongle allows you to use two additional wireless microphones.  Both loudspeaker boxes are equipped with flanges for tripod mounting. You can store cables and accessories in a storage compartment in one of the two speakers. Practically plugged together, the entire system can be carried with one hand. Features Omnitronic COMBO-160BT Ultra-portable all-in-one PA system for mobile live and DJ applications Detachable 6-channel power mixer with built-in MP3 player Dual Class D amplifier (2 x 80 W RMS) Integrated Bluetooth audio streaming 2 full-range speaker systems, each with 20 cm woofer and 25 mm tweeter, bass reflex system and flange for speaker stands 2 mono inputs mic/line with 2-band EQ and adjustable reverb 1 stereo line input 1 stereo AUX input connects any non-Bluetooth device Volume control per channel Adjustable monitor output Master level control with limiter indication UWM-2HH USB dongle with 2 wireless microphones available as accessory Convenient accessory compartment Delivery includes 2 speaker cables and power cable Control: Bluetooth Technical data Power supply: 115/230 V AC, 50/60 Hz Total connected load: 200 W Control: Bluetooth Range: 10 m Size of the woofer: (8") ca. 20 cm Width: 67 cm Height: 46 cm Depth: 31 cm Weight: 16,50 kg Amplifier power: 2 x 80 W RMS Speaker cabinets: 20 cm woofer (8"), 25 mm horn (1") Inputs: Mic/Line, mono: XLR/6.3 mm jack combination Line, stereo: 6.3 mm jack, cinch, 3.5 mm jack USB: for dual radio receiver UWM-2HH (accessory) Outputs: Monitor: Cinch Loudspeaker: 6.3 mm jack Bluetooth: Carrier frequency: 2.4 GHz

Need a complete sound system with professional sound and easy setup? The Yamaha StagePas 1K mkII meets both of those requirements. This 1,100-watt portable column PA system features a 12-inch subwoofer that delivers powerful bass, as well as a line array speaker with 10 1.5-inch diameter speakers. Everything is driven by a built-in Class-D power amplifier. Thanks to the horizontal dispersion range of 170° and the vertical dispersion range of 30°, the StagePas system provides the entire audience with excellent sound quality with room-filling sound down to the smallest corner. The system is packed with state-of-the-art features, including an integrated 5-channel mixer, 1-button EQs, high-quality SPX reverb, and Bluetooth functionality for streaming from smartphones or tablets. The rugged yet lightweight chassis makes it easy to transport and provides enough safety margins. The optional connection of two STAGEPAS 1K mkII or one STAGEPAS 1K mkII with a DXL1K provides a wider coverage area and higher output power for large events or stereo operation. Anyone needing a high-quality all-in-one PA system will find everything they are looking for in the Yamaha StagePas 1K mkII. Features Yamaha STAGEPAS 1K MK2 Latest version of Yamaha's popular PA system Built-in 5-channel digital mixer for microphones and instruments Bluetooth connectivity allows you to stream audio from your smartphone or tablet 1,100-watt Class D amplifier delivers high SPL performance Line array with 10 speakers for 170° of horizontal coverage and 30° of vertical coverage 12-inch subwoofer provides deep bass down to 37 Hz 1-button EQ allows for tonal adjustments on the fly High-resolution SPX digital reverb adds a professional sheen to performance Bluetooth Control Editor remote control application lets you tweak settings from anywhere Optionally combines with Yamaha's DXL1K column PA speaker for stereo operation Comes with a carrying case Technical Specifications Subwoofer: 12 inch Drivers: 10 x 1.5 inch Amplifier: Class-D with 1,100 watts (500 W LF | 600 W HF) Frequency response: 37 - 20,000 Hz Crossover: 240 Hz Max. SPL: 125 dB Bluetooth: 5.0 (A2DP | SBC | AAC) DSP: SPX digital reverb Weight complete: 23 kg Weight subwoofer: 20 kg Dimensions (W x D x H): 334 x 418 x 2000 mm Scope of delivery Yamaha STAGEPAS 1K MK2 (1x sub | 1x line array speaker | 2x spacers) 1x power cable 1x special cover Transport cover Instruction manual

The MAXX-1508DSP is a compact, active PA system with an RMS of 700 watts. Are you a mobile DJ, solo entertainer or musician? Then this mobile PA with its high-quality sound and good level stability is your ideal companion. The 15" subwoofer in the bass reflex cabinet delivers powerful, dry bass. It is equipped with a Class D amplifier. The two satellites with 8" bass/midrange drivers and 1" compression drivers feature a passive 2-way crossover and PTC tweeter protection. You can choose from a balanced XLR/6.3mm jack, a stereo RCA input with level adjustment and Bluetooth for wireless music enjoyment from your smartphone or tablet. You can connect additional active speakers via an XLR parallel output. 3 EQ presets (DSP-controlled) with status displays, the integrated charging unit for USB devices and the clearly arranged volume controls (separately adjustable for subwoofer and satellites) make working with the 2.1 system easy. OMNITRONIC MAXX-1508 2-Way Top 2x 2 x 8" passive full-range speaker, 150 W RMS 2-way bass-reflex system with 8" bass-midrange speaker and 1" compression driver Serve as a mobile 2.1 system together with the MAXX-1508 subwoofer With passive 2-way crossover, PTC tweeter protection Speaker connection Stable MDF enclosures (16 mm) with scratch-resistant lacquer surface, steel grille and recessed handle Flange for stand installation M8 threaded inserts for suspended installation Applications: standing, as monitor, on a subwoofer or speaker stand, suspended OMNITRONIC MAXX-1508DSP 2.1 Active Subwoofer High-power 15" active subwoofer with DSP and Bluetooth, 700 watts 15" subwoofer with Class D amplifier in bassreflex cabinet Amplifier power: 400 W RMS + 2 x 150 W RMS for two satellites Serves as a mobile 2.1 system together with MAXX-1508 2-way tops Balanced signal input XLR/6.3 mm jack L/R Additional stereo RCA input, with level switch Parallel XLR line output L/R Integrated Bluetooth audio streaming for your smartphones and tablets 3 EQ presets with indicators, DSP-controlled Signal limiter, DSP-controlled Separate volume control for subwoofer and satellites Stereo/mono selection Built-in fast charger (5 V/2 A) for convenient charging of your mobile USB devices MPX/MDF enclosure (16 mm) with scratch-resistant lacquer surface and steel grille M20 metal flange for mounting a satellite speaker Castors available as accessory Delivery includes two speaker cables Digital signal processor Controling by Bluetooth Transport aid: Wheels optional Technical Data OMNITRONIC MAXX-1508 2-Way Top 2x Rated power: 2 x 150 W RMS Program power: 300 W Frequency range: 120 - 18000 Hz Sensitivity: 92 dB Max. SPL: 116 dB Dispersion angle: 90° x 60° Impedance: 4 Ohm Connections: Input: 1 x speakers via speaker built-in socket (f) Speakers: 1 x woofer (8") approx 20 cm, 1 x compression tweeter highs (1") approx 2,5 cm Width: 25.5 cm Height: 42.1 cm Depth: 24.1 cm Weight: 17.25 kg Technical Data OMNITRONIC MAXX-1508DSP 2.1 Active Subwoofer Power supply: 230 V AC, 50 Hz Power consumption: 800 W Rated power: 400 W RMS LF; 2 x 150 W RMS HF Frequency range: Bass 35 - 120 Hz Top 120 - 18000 Hz Sensitivity: 95 dB Max. SPL: 120 dB DSP: Digital signal processor Control: Bluetooth Circuitry: Class D Input: 1 x stereo via stereo RCA Input: 1 x stereo via 3-pin XLR/6.35mm jack (F) combination socket (mounting version) Output: 1 x line via 3-pin XLR Output: speakers via speaker built-in socket (f) Input channels: 1 x stereo via XLR or RCA or bluetooth, channel control via Rotary knob Speakers: 1 x woofer (15") approx 38 cm with ferrit magnet Material: Birch multiplex; MDF (Medium-density fibreboard) Width: 45.4 cm Height: 53.4 cm Depth: 57 cm Weight: 29.30 kg

Features JB Systems PPC-081 Compact column speaker system with integrated media player + Bluetooth® 8" woofer with surprisingly deep bass and separate bass control 2 additional microphone inputs with individual control + integrated sound effect control Both mic/guitar inputs can also be used as mono line inputs Stereo mini jack input for connecting an external player The media player accepts USB sticks as well as SD-HC memory cards up to 32 GB Playback of MP3, WAV, WMA, APE and FLAC files Modulable column speaker for 3 different heights No speaker stand needed anymore! Balanced line output for connecting additional speakers Bluetooth TWS function for wireless stereo when using 2 speakers Technical data Frequency range: 45 - 18.000 Hz Woofer diameter: 8 inch Supported audio formats: APE, FLAC, MP3, WAV, WMA IP rating: indoor Power supply: AC 100 - 240V, 50/60Hz | battery power consumption: ca 100 Watt inputs 3 pin XLR, jack, IEC, USB, Bluetooth Outputs 3 pin XLR Weight: 13,8 kg Dimensions (W x D x H): 310 x 400 x 1860 ( max) / 1390 (medium) / 920 (low) mm

With an output of 800 watts RMS, the MAXX-1810DSP is a compact but powerful PA system. For mobile DJs, solo entertainers or for festive events up to medium size, the 2.1 system delivers a high-quality sound experience. The 18" subwoofer with Class D amplifier in a bass reflex cabinet delivers powerful, dry bass. The two satellites with 10" bass/midrange drivers and 1" compression driver feature a passive 2-way crossover with PTC tweeter protection. You can use a balanced XLR/6.3 mm jack, a stereo RCA input with level adjustment and integrated Bluetooth for wireless music enjoyment from your smartphone or tablet. You can connect additional active speakers via an XLR parallel output. 3 EQ presets with status indicators, the signal limiter (both DSP-controlled), the separately adjustable volume for subwoofer and satellite and the integrated quick charger for convenient charging of your smartphone or tablet make working with the 2.1 system comfortable. OMNITRONIC MAXX-1810 2-Way Top 2x 2 x 10" passive full-range speaker, 150 W RMS 2-way bass-reflex system with 10" bass-midrange speaker and 1" compression driver Serve as a mobile 2.1 system together with the MAXX-1508 subwoofer With passive 2-way crossover, PTC tweeter protection Speaker connection Stable MDF enclosures (16 mm) with scratch-resistant lacquer surface, steel grille and recessed handle Flange for stand installation M8 threaded inserts for suspended installation Applications: standing, as monitor, on a subwoofer or speaker stand, suspended OMNITRONIC MAXX-1810DSP 2.1 Active Subwoofer High-power 18" active subwoofer with DSP and Bluetooth, 800 watts 18" subwoofer with Class D amplifier in bassreflex cabinet Amplifier power:500 W RMS + 2 x 150 W RMS for two satellites Serves as a mobile 2.1 system together with MAXX-1810 2-way tops Balanced signal input XLR/6.3 mm jack L/R Additional stereo RCA input, with level switch Parallel XLR line output L/R Integrated Bluetooth audio streaming for your smartphones and tablets 3 EQ presets with indicators, DSP-controlled Signal limiter, DSP-controlled Separate volume control for subwoofer and satellites Stereo/mono selection Built-in fast charger (5 V/2 A) for convenient charging of your mobile USB devices MPX/MDF enclosure (16 mm) with scratch-resistant lacquer surface and steel grille M20 metal flange for mounting a satellite speaker Castors available as accessory Delivery includes two speaker cables Digital signal processor Controling by Bluetooth Transport aid: Wheels optional Technical Data OMNITRONIC MAXX-1810 2-Way Top 2x Rated power: 2 x 150 W RMS Program power: 300 W Frequency range: 90 - 18000 Hz Sensitivity: 93 dB Max. SPL: 119 dB Dispersion angle: 90° x 60° Impedance: 4 Ohm Connections: Input: 1 x speakers via speaker built-in socket (f) Speakers: 1 x woofer (10") approx 25 cm, 1 x compression tweeter highs (1") approx 2,5 cm Width: 28.5 cm Height: 46.6 cm Depth: 28.8 cm Weight: 20.95 kg Technical Data OMNITRONIC MAXX-1810DSP 2.1 Active Subwoofer Power supply: 230 V AC, 50 Hz Power consumption: 800 W Rated power: 500 W RMS LF; 2 x 150 W RMS HF Frequency range: Bass 32 - 190 Hz Top 90 - 18000 Hz Sensitivity: 99 dB Max. SPL: 123 dB DSP: Digital signal processor Control: Bluetooth Circuitry: Class D Input: 1 x stereo via stereo RCA Input: 1 x stereo via 3-pin XLR/6.35mm jack (F) combination socket (mounting version) Output: 1 x line via 3-pin XLR Output: speakers via speaker built-in socket (f) Input channels: 1 x stereo via XLR or RCA or bluetooth, channel control via Rotary knob Speakers: 1 x woofer (18") approx 45 cm with ferrit magnet Material: Birch multiplex; MDF (Medium-density fibreboard) Width: 50.4 cm Height: 46.6 cm Depth: 60.8 cm Weight: 36.45 kg

Features JB Systems PPC-082B Compact mobile column speaker system with integrated media player + Bluetooth®. The PPC-082B is equipped with an integrated rechargeable battery for mobile use (battery included) 8" woofer with surprisingly deep bass and separate bass control 2 additional microphone inputs with individual control + integrated sound effect control Both microphone/guitar inputs can also be used as mono line inputs Stereo mini-jack input for connecting an external player The media player accepts USB sticks as well as SD-HC memory cards up to 32 GB Playback of MP3, WAV, WMA, APE and FLAC files Modulable column speaker for 3 different heights No speaker stand needed anymore! Balanced line output for connecting additional speakers Bluetooth TWS function for wireless stereo when using 2 speakers Battery life at half power = +/- 10 hours (bass boost at 50%) Battery life at full power = > 5 hours (bass gain at 50%) (battery life may be affected by music style) Technical data Frequency range: 45 - 18.000 Hz Woofer diameter: 8 inch Supported audio formats: FLAC, MP3, WAV, WMA IP rating: indoor Power supply: AC 100 - 240V, 50/60Hz | battery power consumption: ca 100 Watt inputs 3 pin XLR, jack, IEC, Usb, Bluetooth Outputs 3 pin XLR Weight: 16.5 kg Dimensions (W x D x H): 310 x 400 x 1860 ( max) / 1390 (medium) / 920 (low) mm

This new system uses a curve array architecture that provides an optimised, controlled sound diffusion at a sound pressure level of 128dB SPL. With a total of 12 loudspeakers, the satellite has been specially designed to achieve an effective aperture of 100° horizontal and 70° vertical. Bass is provided by a powerful 12-inch long-excursion bass driver mounted in a bass-reflex subwoofer. The latter accommodates class D amplification with all the protections, a 4-input mixer with TWS Bluetooth® and a powerful DSP offering the possibility to adjust the sound according to your desires. You also can send music from your mobile to the MOJO2200curve Bluetooth® module.Thanks to the “True Wireless Stereo” technologie it will transmit the audio signal to a second MOJO and you'll enjoy stereo mode! Installation is simplified thanks to the pneumatic coupling bar, which allows effortless height adjustment and also provides a wired connection between the amplifier and the satellite. Technical Data Column Power: 300W RMS - 600W max. Nominal impedance: 6 Ohms Boomer: 3 X 5" neodynium Tweeter: 9 x 1" Dispersion: 120° x 70° (HxV) Connector: Insert into housing Dimensions: 188 x 517 x 243 mm Weight: 8 kg Technical Data Subwoofer Power: 500W RMS -1000W max. Nominal impedance: 4 Ohms Boomer: 1 x 12 inches Dimensions: 366 x 625 x 541 mm Weight: 27 kg Complete system Frequency response 38 - 18,000Hz SPL max. (@1m) 128 dB Low stage: 1 x 700W RMS / 1400W Max at 6 Ohms Mid/high stage 1 x 300W RMS / 600W Max at 4 Ohms DSP: 24 bit (1 in 2 out) EQ / Presets / low cut / Delay / Bluetooth® TWS

With the new Yamaha Stagepas 200 you get a small, compact and absolutely mobile PA sound system that leaves nothing to be desired. The system is driven by a Class-D bi-amp with a maximum power of 180 watts. An 8 inch woofer and a 1.4 inch tweeter provide a maximum sound pressure level of 125 dB. The Stagepas 200 is thus ideally suited for conferences, entertainers, weddings or other flexible application scenarios. With very compact dimensions of 30 cm at each edge and an integrated carrying handle, the system is ready for any mobile use. In addition to the extensive connection options with various XLR/jack combo inputs, the system also offers an integrated 5-channel digital mixer, so that the sound can be quickly and easily adjusted directly on the unit for each channel. At the same time, each channel offers an integrated effects section with reverb, chorus and delay, as well as Yamaha's clever 1-button EQ/preset solution that lets you tweak the sound with just one knob. In addition to operation directly on the unit, Yamaha's iOS/Android app STAGEPAS Controller is also available for free download from the app stores, allowing all settings to be conveniently made on a smartphone or tablet and can also be saved as a preset. The system also supports Bluetooth streaming with current 5.0 standard. With the included rubber feet, the flexibility of the system is further increased by the fact that the system can be placed at an angle of 30° or 60°. Mounting on a tripod is also possible due to the integrated 35mm tripod flange. Optionally, the Stagepas 200 can be operated with a rechargeable battery pack that allows up to 10 hours of playback. Features Yamaha Stagepass 200 Professional portable PA system for mobile applications 180 Watt Class-D amplifier 8 inch woofer and 1.4 inch tweeter Max. SPL of 125 dB ensures high volume without distortion Integrated 5-channel digital mixer DSP with reverb, delay, chorus and EQ Bluetooth audio streaming Stagepas Controller Remote app for iOS and Android for easy operation from a smartphone or tablet Can be set up at 30 and 60 degree tilt angles Battery operation possible for up to 10 hours (optional battery pack required) Carrying handle for easy transport Technical data Amplifier: Class-D | 180 W peak | 100 W RMS Frequency response: 60 to 20,000 Hz Coverage angle: 90 x 90 degrees Crossover frequency: 2000 Hz Max. SPL: 125 dB Power consumption: 10 W (idle) | 20 Watt (1/8 power) Woofer: 8 inch cone | 2 inch coil Tweeter: compression driver with 1 inch horn aperture | 1.4 inch voice coil Enclosure: ABS Bluetooth: Version 5.0 | A2DP (SBC, AAC) AD/DA: 24 bit | 48 kHz Weight: 12 kg Dimensions (W x D x H): 300 x 301 x 307 mm Scope of delivery Stagepas 200 PA system 1x power cable User manual

Active loudspeaker set consisting of 2x Gemini AS-2115BT 2x Antoc XLR cable - 6 meters 1x Antoc speaker stand Extra Heavy - double pack Features Gemini AS-2115BT Active PA speaker with Bluetooth streaming and media player 2000-watt class AB amplifier Built-in media player supports playback from SD cards and USB sticks Media player buttons for play/pause, repeat and track skip Bass and treble equalizer controls for quick sound adjustment Bluetooth streaming enables audio playback from smartphones, tablets and co. TWS link for stereo pairing with a second AS Series Bluetooth speaker Compact, lightweight and rugged housing Carrying handles for easy transport Technical Specifications 15 inch woofer with 2 inch voice coil - 600 watts RMS 1 inch pure titanium compression driver - 400 watts RMS 2000 watts peak Media Player: USB and SD card playback (MP3, WAV) , FM radio Frequency Range: 40 - 20,000 Hz Max SPL @ 1 M: 110 dB Bluetooth® streaming with TWS Link Tripod mount with 35mm base, 2x M8 fly points Inputs: 2x 6.3mm jack and XLR switchable line/MIC inputs, 3.5mm & RCA AUX inputs Outputs: XLR mix output Weight: 13.65 kg Dimensions (W x D x H): 370 x 442 x 686 mm Features Antoc XLR-6 6m length highly flexible for all system installations Specifications Antoc X-Stand Extra Heavy Maximum load: <50kg Height-adjustable: from 110cm up to 180cm Weight: 4.08kg Colour: black Delivery content: 2 x speaker stands, 1 x carrying bag

Despite its lightweight and compact enclosure design, the DXL1K features a powerful 1100W amplifier driving a high-frequency array speaker system with 10 x 1.5-inch drivers and a large 12-inch subwoofer, producing a peak sound pressure level of up to 125 dB SPL. With an impressive 170° horizontal dispersion angle and 30° vertical dispersion angle, the DXL1K delivers clear, high-quality sound over a wide area. Using Yamaha's proprietary Twisted Flare Port™ technology to reduce wind noise that can occur with compact bass-reflex subwoofers, low-frequency performance is maximized and very deep, powerful, distortion-free bass is produced. The subwoofer features a 12-inch speaker unit packed into one of the smallest enclosures on the market. The subwoofer's lightweight ABS enclosure is coated with a high-quality polyurea coating to prevent wear and tear during transport. It's lightweight enough to make the system extremely portable, but rugged and scratch-resistant enough to withstand harsh performance environments. Features Yamaha DXL1K Column-mounted active loudspeaker system optimized for mobile use 1,100 W Class-D amplifier delivers a whopping 125 dB SPL 12-inch subwoofer produces impressive low frequency response down to 37 Hz 10-speaker line array offers a generous 170° x 30° coverage angle Built-in 2-channel mixer with 1 mic/line input and 1 mono line input 3 EQ modes tailored for speech, music or club applications Robust integrated system protection Lightweight and portable chassis Combines with Yamaha's StagePas 1K mkII portable column PA system for stereo operation Comes with a special cover Technical Specifications Amplifier: Class D with 1,100 watts Subwoofer: 12 Zool Tweeter: 10x 1.5 inch Max. SPL: 125 dB Frequency range: 37 - 20.000 Hz Crossover: 240 Hz Coverage: H170ﾟ x V30ﾟ DSP modes: Voice | Music | Club Power consumption: 25 W (idle) | 91 W (1/8 power) Weight: 23 kg (system) | 1.8 kg (speaker) | 20 kg (sub) | 0.6 kg (spacer) Dimensions (W x D x H): 334 x 418 x 2000 mm Scope of delivery 1x Subwoofer 1x Line Aray loudspeaker 2x spacer 1x special cover Power cable Instruction manual

10" subwoofer with DSP and Bluetooth for the BOB series Features Omnitronic BOB-10A 10" bass reflex subwoofer with DSP and 900 W RMS power Flexibly expandable with BOB-4 satellites for 2.1, 4.1 and 8.1 operation DSP-controlled Class D amplifier (300 W + 2 x 300 W) Built-in Bluetooth audio streaming for wireless music enjoyment 4 EQ presets with status indicators Signal Limiter and Crossover Signal inputs via combination sockets (XLR/jack) and Cinch XLR parallel outputs for coupling further BOB systems or active speakers Volume for subwoofer and satellite L/R separately adjustable Stereo mono switching phase reverser Fault, limit, signal and power display Integrated protection circuits: Soft start, short circuit, limiter, overvoltage, overheating Two M20 metal flanges for mounting the satellites MDF cabinet with hard-wearing textured paint and metal grille Built-in carrying handles and low weight for easy transportation Stackable due to recesses in horizontal position Delivery includes 2 Speaker cables For mobile live and DJ applications and installation in bars, shops, conference rooms and home theaters Control: Bluetooth DSP: Digital Signal Processor Technical data Amplifier power: LF 300 W RMS + HF 2 x 300 W RMS LF speaker: 25 cm (10" ) with 50 mm voice coil Signal connector: combination XLR/6.3 mm jack L/R and Cinch L/R Parallel output: XLR L/R Satellites: Speaker L/R Power supply: 230 V AC, 50 Hz Total connected load: 1060 W Frequency range: 45 - 250 Hz Sensitivity: 100 dB Max. Sound pressure level: 125 dB Control: Bluetooth Loudspeaker: 1 x woofer (10") approx. 25 cm Weight: 17,00 kg Material: MDF (medium density fibreboard) Width: 30 cm Height: 43 cm Depth: 47 cm

Mobile 10" PA system with battery operation, audio player, Bluetooth and 2 wireless microphones Features Omnitronic WAMS-10BT2 MK2 Portable all-in-one amplifier system with 80 Watt output power For mobile use at events, sales meetings, lectures etc. 3-channel power mixer Highly efficient and battery-saving biamp amplifier with DSP control 2-way bass reflex system with 25 cm (10") woofer MP3 player with SD card slot, USB port and IR remote control Integrated Bluetooth audio streaming for wireless music enjoyment Stereo Bluetooth link for wireless stereo operation with 2 linked systems 2 mono input channels Mic/Line and Hi-Z instrument (CH 2) with echo effect and feedback suppression 1 stereo input channel for internal audio player or external line signal sources with talkover switch UHF radio receiver with 2 matching handheld microphones 1 additional battery can be retrofitted for up to 8 hours of operating time Integrated automatic charging with status display Signal limiter and crossover, DSP controlled Common 2-band EQ for bass and treble Link output for another active speaker Lightweight ABS housing with metal grille and carrying handle Storage compartment for wireless microphones and accessories Mounting flange for tripod mounting Easy transport via extendable trolley handle and 2 wheels Registration and fee-free in the EU Controllable via IR remote control enclosed; Bluetooth Bluetooth: Has a range of up to 20m Technical data Power supply: 100-240 V AC, 50/60 Hz or 12 V DC Total connected load: 150 W Output power: 80 W RMS Power connection: Power supply via IEC (M) built-in version | Power connection cable with safety plug (included) | Battery/rechargeable battery Battery type: 1 x Lithium-Ion 12.8 V, 8000 mAh, 51.2 Wh Frequency range: 50 - 20,000 Hz Distortion factor: <0.1 % at 1 kHz Sensitivity: 96 dB (1W/1m) Max. Sound pressure: 115 dB Control: IR remote control included; Bluetooth Audio player: USB + SD + Bluetooth Formats: MP3, WMA Frequency band: 2.4 GHz Status LED: Power, Limit, Battery level indicator Connections: Input: Line via 1x 3.5 mm jack (stereo) built-in version Input: Line via 1x stereo RCA Input: Mic/Line via 2x 3-pin XLR/6.35mm jack (W) combo jack built-in version Output: 3-pin XLR Frequency band: UHF 863 - 865 MHz Suitable storage media: USB devices/SD cards max. 32GB (FAT 32) Woofer: 10 inch Tweeter: 1 inch Speaker type: Wireless PA system Range: 20 m Bluetooth Length: 31 cm Width: 36 cm Height: 56 cm Weight: 13,58 kg Technical data microphone Power supply: 3 V DC Capsule type: Dynamic Polar pattern: Cardioid Battery: 2 x Mignon (AA) (not included) Range: 30 m Length: 26 cm Diameter: Ø 4 cm

The WAMS-08BT MK2 is a portable all-in-one system with rechargeable battery for mobile use. Whether for street musicians, at lectures, family celebrations or in the aerobics group: Thanks to the versatile connection options you are flexible on the road. The box has a 3-channel power mixer with 40 W RMS power. The 2-way bass reflex system with 20 cm woofer (8") provides powerful sound despite the small size.  The WAMS-08BT MK2 is equipped with an MP3 player with SD card slot and USB connection. Thanks to Bluetooth, you can also play music (for example from your smartphone) wirelessly. You can also use the USB port to connect two optional wireless microphones or charge your mobile devices. A stereo input channel for line sources (e.g. CD player or notebook) and two mono input channels for an instrument or microphone provide additional flexibility. The 2-band EQ lets you control bass and treble. The WAMS-08BT is easy to carry thanks to a carrying handle and weighs only 7 kg. It is prepared for tripod mounting with a mounting flange. Features Omnitronic WAMS-08BT MK2 Portable all-in-one PA system for mobile use Ideal for mains independent and wireless applications, e.g. at sales events, lectures and gyms 3-channel power mixer with 40 W RMS output power 2-way bass-reflex system with 20 cm woofer (8") MP3 player with SD card slot, USB input and IR remote control Integrated Bluetooth audio streaming for your smartphones and tablets UWM-2HH USB dongle with 2 UHF microphones available as accessory USB port can also be used for charging mobile devices Mains operation or battery operation via integrated li-ion battery 1 additional battery can be retrofitted for up to 8 hours operating time Integrated automatic charging of the battery and status indicator 2 mono input channels mic/hi-Z instrument with adjustable echo effect 1 stereo input channel for line signal sources e.g. CD players and notebooks Common 2-band EQ for highs and lows Lightweight black plastic enclosure with metal grille and carrying handle Flange for speaker stand installation Technical data Power supply: 110-240 V AC, 50/60 Hz Total connected load: 65 W Battery type: 1 x Lithium-Ion 11.1 V, 4000 mAh, 44.4 Wh Battery: operating time up to 4h depending on the program used Charging time 4h Sensitivity: 90 dB (1W/1m) Power connection: Power supply for cold appliances (M) Built-in version Power supply cable with earth contact (M) (supplied) Battery/rechargeable battery installed 20 cm woofer (8") 2.5 cm neodymium tweeter (1") Width: 27 cm Height: 42 cm Depth: 29 cm weight: 7,75 kg Audio player Frequency band: 2.4 GHz Control: IR remote control included Bluetooth built-in Range: 10 m Bluetooth Playback format: MP3, WMA, WAV Suitable storage media: USB devices and SD(HC) cards up to 32 GB File system: FAT32 Remote control battery: 1 x button cell 3,0 V CR2025 lithium-manganese built-in Range: 10 m IR remote control Amplifier power: 40 W RMS, 60 W max. Inputs: Mic/Hi-Z, mono: XLR/6.3 mm jack combination Line, stereo: stereo cinch and 3.5 mm jack USB: for dual radio receiver UWM-2HH (accessory)

The active bass + column system from Audiophony Mojo500 Line will convince you with its presence. The precisely calculated position of each individual loudspeaker creates a very clean room coverage (loudspeaker system height = over 2 meters). In addition, an internal compressor ensures excellent sound and top performance. In addition, the system is an absolute lightweight with less than 15 kg and thus very easy to transport. Features Audiophony Mojo500 Line 3 channel mixer with Bluetooth® connection 120° Horizontal angle of radiation 1x Line Out 2-band EQ 2x instrument or microphone input (XLR/jack) Simple plug connection Technical data Speaker Bar Power: 100W RMS 200W max. Frequency range: 180 - 20,000 Hz SPL max. (@1m): 116 dB Nominal impedance: 4 Ohm Speakers: 6 x 2.75 inch Dispersion: 120° x 20° (HxV) Connection: integrated in base Dimensions : (80 x 80 x 830 mm) x2 Net weight: 2.45 kg + 1.20 kg = 3.65 kg Technical data Housing Power: 150W RMS, 300W max. Frequency range: 50 - 20,000 Hz SPL max. (@1m): 116 dB Nominal impedance: 4 Ohm Woofer: 8 inch Weight: 10,8 kg Dimensions: 340 x 430 x 400 mm Amplifiers Bass: 1 x 150W RMS / Class D 4 Ohm Midrange/Tweeter: 1 x 100W RMS / Class D 4 Ohm

Active loudspeaker set consisting of 2x Gemini AS-2108BT 2x Antoc XLR cable - 6 meters 1x Antoc speaker stand Extra Heavy - double pack Features Gemini AS-2108BT Active PA speaker with Bluetooth streaming and media player 500-watt class D amplifier Built-in media player supports playback from SD cards and USB sticks Media player buttons for play/pause, repeat and track skip Bass and treble equalizer controls for quick sound adjustment Bluetooth streaming enables audio playback from smartphones, tablets and co. TWS link for stereo pairing with a second AS Series Bluetooth speaker Compact, lightweight and rugged housing Technical Specifications 8 inch woofer with 1 inch voice coil - 150 Watt RMS Pure titanium compression driver - 100 watts RMS 500 watts peak Media Player: USB and SD card playback (MP3, WAV) , FM radio Frequency Range: 60 - 20,000 Hz Max SPL @ 1 M: 98 dB Bluetooth® streaming with TWS Link Tripod mount with 35mm base, 2x M8 fly points Inputs: 2x 6.3mm jack and XLR switchable line/MIC inputs, 3.5mm & RCA AUX inputs Outputs: XLR mix output Weight: 5.2 kg Dimensions (W x D x H): 207 x 251 x 389 mm Features Antoc XLR-6 6m length highly flexible for all systems Specifications Antoc X-Stand Extra Heavy Maximum load: <50kg Height-adjustable: from 110cm up to 180cm Weight: 4.08kg Colour: black Delivery content: 2 x speaker stands, 1 x carrying bag

The Gemini AS-10TOGO provides you with powerful sound in a compact, portable format. This model combines a robust construction with a range of features that allow you to enjoy your music anywhere and anytime. Thanks to its handy design, telescoping trolley handle and built-in wheels, this speaker is easy to transport – perfect for on-the-go use, whether for spontaneous parties, outdoor events, or live performances. With a power output of 1000 watts, distributed through a 10-inch woofer and a Piezo high-frequency driver, the device delivers impressive sound and clear reproduction across the entire frequency range. The Bluetooth functionality allows for wireless streaming, while USB and SD card slots let you access your music collection. Even radio enthusiasts will be pleased, as the speaker features a built-in FM radio receiver. A special highlight is its versatility. With separate inputs for microphone and guitar and its own echo effect, the device offers ideal conditions for live performances, karaoke sessions, or speeches. The built-in audio mixer on the back lets you precisely tailor the sound to your preferences – with dedicated controls for volume, bass, treble, and echo. This ensures you always achieve the optimal sound experience, adjusted to the environment. The rechargeable battery with long runtime makes this speaker particularly independent and flexible, while an easily accessible charge indicator keeps you informed about the current battery status. The compact design and lightweight materials ensure that you can easily take your music anywhere. The AS-10TOGO from Gemini is your reliable companion for any musical adventure. Features Gemini AS-10TOGO Powerful sound thanks to a 1000-watt amplifier for clear sound and deep bass. Compact, portable design with telescoping trolley handle and wheels – ideal for mobile use. Wireless music streaming via Bluetooth, allowing you to play your favorite songs directly from your smartphone. Integrated media player for USB and SD cards, supporting a variety of file formats. FM radio for on-the-go listening – always tuned in. Flexible use with microphone and guitar inputs for karaoke or live performances. Customizable sound settings with separate controls for volume, bass, treble, and echo. Long-lasting operation with rechargeable battery, perfect for outdoor events. Easy operation and transport due to compact housing and robust construction. Versatile mounting options with tripod base and brackets – ideal for both indoor and outdoor events. Technical Specifications Amplifier Type: Class D Woofer: 10” Woofer with 1.2" High-Temperature Voice Coil High-Frequency Driver: Piezo Compression Driver Total Power: 1000 Watts (200W RMS for Woofer, 100W RMS for High-Frequency Driver) Connections: 1 x Stereo RCA Aux Input 1 x Stereo 1/8” Aux Input 1 x 1/4” Microphone Input 1 x 1/4” Guitar/Instrument Input Outputs: 1 x Stereo RCA Aux Output Media Playback: USB and SD Cards (MP3, WAV, FLAC) Additional Features: Bluetooth Streaming, FM Radio Frequency Range: 55 Hz - 20 kHz Maximum Sound Pressure Level: 100 dB SPL @ 1 Meter Signal Processing: Controls for Bass, Treble, and Echo Housing Material: ABS Plastic Transport Options: Trolley Handle, Built-In Wheels Mounting Options: Tripod Mount with 35mm Base, 1 x M8 Flying Points Battery: 12V 4A Lithium Battery (48 Watt-Hours) Battery Charging Time: 4-6 Hours Battery Operating Time: 6-10 Hours Power Supply: 100-240V (Adapter), 12V Car Charger Port Weight: 7.5 kg Dimensions (W x D x H): 292 x 315 x 490 mm Scope of Delivery Gemini AS-10TOGO Microphone Cable Power Cord Instruction Manual

The Audiophony Mojo 1200 LINEevo is an active column system with subwoofer, mixer and TWS Bluetooth® input. Whether in meeting rooms, for rental, live performances or anywhere where uncomplicated sound reinforcement is desired, the complete system can fully convince. With an output of 300 W RMS, it is ideally suited for small and medium-sized applications. An integrated DSP with various presets optimizes the playback to the current conditions, so that your listeners get an optimal result. Also on board is Bluetooth functionality - so you can stream the music directly to the 1200 LINEevo after the one-time pairing of smartphones or tablets. For optimal mobility, the column system can be easily assembled/disassembled for transport thanks to the stacking system and taken anywhere. Covers for the columns and the box are included to provide protection during transport. The system is designed and manufactured for high durability. The cabinet is extremely scratch resistant and even bad weather can not affect the system thanks to the polyurea resin coating. Features Audiophony Mojo 1200 LINEevo Active complete system with subwoofer and 2 columns 300 Watt RMS power for small to medium sized venues Ideal for presentations, meetings, rentals, live performances, etc. Bluetooth function for streaming audio Extremely scratch and weather resistant enclosure Integrated DSP with presets for sound optimization High mobility and easy transport due to the possibility to mount/dismount the columns Covers for the columns and the box included in delivery Technical Data Column Power 180W RMS - 360W max Nominal impedance 6 Ohms Woofer: 6x 3 Inch Tweeter 1x 1 Inch Dispersion : 120° x 30° (HxV) Connector : Slot-in inegrated into the subwoofer Dimensions : (2x) 103 x 750 x 100 mm Weight : Column: 3.75 Kg / Spacer: 2.1 Kg Technical Data Subwoofer Power : 250W RMS - 500W max Nominal impedance : 4 Ohms Woofer: 1x 10 Inch Dimensions: 389 x 626 x 626 mm Weight : 21.8 kg Technical Data Complete system Frequency response : 38Hz -18KHz Max. SPL (@1m) : 122 dB Low frequencies 1 x 300W RMS / 600W Max Mid/High frequencies 1 x 300W RMS / 600W Max DSP - 24 bit (1 in 2 out) - EQ / Presets / Low cut / Delay / Bluetooth® TWS

Powerful iLINE SET from Audiophony with a power of 2040 watts consisting of: 2 x iLINEsub12A 2 x iLINEsub12P 4 x iLINE83B 2 x iLINEcord60 1 x iLINEbox The active bass + column system from Audiophony will convince you with its presence and flexibility.  The high-quality workmanship and the elegant design make this set the best choice for almost every event.  Features Audiophony iLINE SET Composition 2040W 2040 Watt RMS  >120dB max. SPL DSP control via laptop:  X-Over, EQ, Delay, Compressor Simple and stable plug connections The basses can be loaded vertically and horizontally.

Die MOJO2000LIVE von Audiophony​ ist ein aktives 12" Subwoofer- und Säulensystem mit eingebauten 4-Kanal Mischpult und einem TWS Bluetooth® 5.0 Eingang. Dieses Lautsprechersystem überzeugt mit seiner Leistung und einer sehr gute Raumabdeckung (Lautsprechersystem Höhe = 2,14 Meter). Durch die einfache Bedienung eignet sich dieses Soundsystem für kleine Bands und DJ´s. Features Audiophony Mojo2000 Live Integrierter Hall-Effekt (Kanal 1 & 2) Bluetooth® 5.0 TWS (True Wireless Stereo) verbinden Sie zwei MOJO2000Live Anlagen im stereo Modus 4 Kanal Mixer 2x Mic/Line Combo XLR (jeweils mit XLR Link out) 1x Line Klinke 1x Line RCA/Bluetooth XLR Mix Output Subwoofer Control Eingebautes DSP 3-Band EQ EQ-Presets (Music, Voice, DJ) Delay Low Cut User Presets 120° Horizontaler Abstrahlwinkel 127 dB max. SPL 35 Hz - 18 kHz Frequenzwiedergabe Einfache und robuste Steckverbindung Die Lieferung erfolgt inkl. Transporthüllen für die Säulenlautsprecher und den Subwoofer Technische Daten Säule Leistung: 180 W RMS - 360 W max. Impedanz: 6 Ohm Lautsprecher: 6 x 3" Breitband + 1 x 1" Hochton Horn Abstrahwinkel (HxV): 120° x 30° Anschlüsse: Integriertes Stecksystem Gewicht: 5.85 kg Abmessungen: 103 x 100 x 750 mm Technische Daten Tieftöner Leistung: 250 W RMS - 500 W max. Impedanz: 4 Ohm Subwoofer: 12 Zoll Gewicht: 28 kg Abmessungen: 389 x 626 x 666 mm

The Audiophony MOJO 500 Liberty TWS is a versatile and powerful audio solution for various applications. With this system, you can not only enjoy impressive sound but also experience the freedom of wireless connectivity. Thanks to the Bluetooth® TWS technology, the system can easily be operated in True Wireless Stereo mode, allowing two speakers to be connected simultaneously to create spatial sound. The integrated powerful battery system allows for flexible use, as you can operate the speakers independently of power outlets for up to 15 hours, depending on the usage scenario. The charging time is only about four hours, so you’ll be ready to go again quickly. The system is especially suitable for events or performances where both mobility and sound quality are important. The speakers not only impress with their mobility but also with their robust construction and easy handling. The MOJO 500 Liberty TWS offers a 120° horizontal dispersion angle, enabling wide sound distribution, and stands out with minimal feedback. This way, you can fully enjoy the sound without worrying about disturbing background noise. With the built-in 8-channel mixer, you have numerous connection options, including XLR/Jack combos for microphones and instruments, as well as mini-jack, RCA, and Bluetooth for even greater flexibility. The 2-band EQ and adjustable reverb effect ensure that you can adjust the sound to your personal preferences. A temperature-controlled fan also ensures that the system remains cool, even during longer sessions. Whether for small events, presentations, or as a mobile sound system – the Audiophony MOJO 500 Liberty TWS offers a reliable, high-quality solution that impresses both in sound quality and ease of use. Features Audiophony MOJO 500 Liberty TWS Flexible operation thanks to integrated battery with up to 15 hours of runtime for background music Bluetooth® TWS for wireless stereo operation with two speakers Easy plug connections for quick setup 8-channel mixer with various connection options (XLR/Jack, mini-jack, RCA, Bluetooth) 2-band EQ and adjustable reverb effect for personalized sound shaping 120° horizontal dispersion angle for even sound distribution Very low feedback, ideal for live performances Includes practical bag for the speaker modules Temperature-controlled fan for efficient cooling Robust and portable design, easy to transport and store Technical Specifications Speaker (Column): Power: 100 W RMS – 200 W max Frequency range: 180 Hz – 20 kHz Max. SPL (at 1m): 116 dB Impedance: 4 Ohm Speaker: 6 x 2.75" broadband Dispersion angle (HxV): 120° x 20° Connections: Integrated plug system Dimensions (x2): 80 x 80 x 830 mm Weight (column and distance piece): 3.65 kg Subwoofer: Power: 150 W RMS – 300 W max Frequency range: 50 Hz – 200 Hz Max. SPL (at 1m): 116 dB Impedance: 4 Ohm Subwoofer: 8" Dimensions: 340 x 430 x 400 mm Weight: 10.8 kg