Features 4-in-1 DMX light effect bar with laser, 2 rotating LED derbies, 2 LED spots and white strobe LEDs Laser class 2M: does not require additional protective measures or appointment of a laser safety officer Ultra-light ideally suited for mobile use Crossbar with integrated DMX control unit and stand sleeve Comes pre-assembled with practical transport bag Convenient control via wireless foot switch and IR remote control 2 laser diodes project hundreds of red and green laser beams 2 rotating derbies for mirror ball effects with three bright LEDs (red, green and blue) each 2 spots three bright TCL LEDs (red, green and blue) each 4 white strobe LEDs Auto, music, master/slave and DMX mode 37 built-in auto and music show programs that include all 4 effect units Addressing and setting via control panel with 4-digit LED display Sound-control via built-in microphone with sensitivity control LED derbies and LED spots individually adjustable and interchangeable Swivel mounting brackets for truss mounting When fog is used, this effect becomes especially attractive Switch-mode power supply for operation between 100 and 240 Volts Feed-through output allows to power up to 8 devices Technical specifications Power supply: 100-240 V AC, 50/60 Hz Power consumption: 50 W Laser classification: 2M Laser modules: Red 100 mW, green 30 mW Wavelength: Red 650 nm, green 532 nm Derby (2 x): 3 x RGB, 1 W each Spots (2 x): 3 x TCL, 3 W each Strobe: 4 x white, 1 W each Beam angle: 13° (spots), 8° (strobe) Flash rate: 0-30 Hz DMX channels: 3/5/9/27 DMX512 connection: 3-pin XLR Sound control: via built-in microphone Dimensions (LxWxH): 1320 x 145 x 320 mm Weight: 7.3 kg Shipping weight: 12.00 kg Attention: The stand as shown on the first pictures is NOT included.

Features Eurolite LED PIX-144 Equipped with 144 x SMD-LED in the colours red, green and blue Flicker-free projection 3, 5, 6, 12, 24 or 48 DMX channels selectable DMX-controlled operation or stand-alone operation with master/slave function possible Addressing and setting via control board with four operating keys and LED display Functions: static colors, RGB color mixing, internal programs, dimmer, strobe effect adjustable via DMX, Master/Slave Divided into 8 pixels (lighting units with 18 LEDs each) that can be individually controlled via DMX Music control via built-in microphone, sensitivity adjustable via Control Board Hanging as well as standing mounting possible Locking possibility at the hangers Switch-mode power supply technology for mains voltage between 100 and 240 volts DMX512 control possible via any commercially available DMX controller Loop-through output for power supply of up to 8 devices Ready for connection via enclosed cold appliance power cable with safety plug Control: DMX Control: Stand-alone Color generation: RGB Technical data Power supply: 100-240 V AC, 50/60 Hz DMX control channels: 3/5/6/12/24/48 DMX512 connector: 3-pin XLR Music control: via built-in microphone Flash rate: 20 Hz LED type: RGB-SMD Number of LEDs: 144 Protection class: IP20 Lamp type: LED lamp Total connected load: 25 W Subject to ecodesign: Yes Special product: Not intended for room lighting in households. Intended use: Lighting for show effects Weight: 1.5 kg Dimensions (L x W x H): 1020 x 65 x 80 mm

4-in-1 DMX light effect bar with laser, 2 rotating LED derbies, 2 LED spots and strobe LEDs in white and UV Enhanced version with very high brightness and additional UV LEDs Laser class 2M: does not require additional protective measures or appointment of a laser safety officer Ultra-light ideally suited for mobile use Crossbar with integrated DMX control unit and stand sleeve Comes pre-assembled with practical transport bag Convenient control via wireless foot switch and IR remote control 2 laser diodes project hundreds of red and green laser beams 2 rotating derbies for mirror ball effects with 6 bright LEDs (red, green and blue) each 2 spots with 6 bright TCL LEDs (red, green and blue) each Strobe effect with 4 BCL LEDs (white and UV) Auto, music, master/slave and DMX mode 39 built-in auto and music show programs that include all 4 effect units Addressing and setting via control panel with 4-digit LED display Sound-control via built-in microphone with sensitivity control Swivel mounting brackets for truss mounting When fog is used, this effect becomes especially attractive Switch-mode power supply for operation between 100 and 240 volts Feed-through output allows to power up to 8 devices

Features Eurolite LED CBB-4 COB RGB 4 powerful 15W RGB LEDs (COB) Auto, Music, Master/Slave and DMX mode Integrated show programs in auto and music mode Direct color selection for 19 colors Infinitely variable RGB color mixing, color change, color fade, dimmer and strobe effect Flicker-free projection Addressing and settings via control unit with 4-digit LED display Convenient remote control via supplied IR remote control EUROLITE IR-7 Music control via built-in microphone with adjustable microphone sensitivity DMX512 control possible via any commercially available DMX controller 3, 5, 12, 15 or 19 DMX channels selectable for different applications Pivoting mounting bracket Loop-through output for power supply of up to 8 devices Control: DMX Control: Stand-alone Control: IR remote control Color generation: RGB Technical data Power supply: 100-240 V AC, 50/60 Hz DMX channels: 3/5/12/15/19 DMX connector: 3-pin XLR Music control: via built-in microphone LED type: 15 W RGB (COB) Number of LEDs: 4 Beam angle: 39°. Protection class: IP20 Lamp type: LED lamp Fan: Yes, super silent Total connected load: 70 W Beam angle: 39 ° Subject to ecodesign: Yes Special product: Not intended for room lighting in households. Intended use: Lighting for show effects Weight: 4 kg Dimensions (L x W x H): 160 x 460 x 160 mm

Features Eurolite LED BAR-6 QCL RGBW Operable in stand-alone mode or via DMX DMX512 control possible via any commercially available DMX controller (occupies max. 9 channels) 2, 4, 5, 6, or 9 DMX channels selectable Music control via built-in microphone Microphone sensitivity adjustable via Control Board Convenient addressing and setting via control board with four operating keys and LED display Functions: static colours, RGBW colour mixing, colour temperature settings, internal programmes, dimmer and strobe settings, master/slave Equipped with 6 x 4 W QCL LEDs in red, green, blue and white Hanging as well as standing mounting possible Locking option on mounting bracket Flicker-free projection Loop-through output for power supply of up to 8 devices Switch-mode power supply technology for mains voltage between 100 and 240 volts Ready for connection via enclosed cold appliance power cable with safety plug Control: DMX Control: Stand-alone Color generation: RGBW Technical data Power supply: 100-240 V AC, 50/60 Hz DMX channels: 2/4/5/6/9 DMX connector: 3-pin XLR Music control: via built-in microphone Flash rate: 20 Hz LED type: 4 W QCL (RGBW) Number of LEDs: 6 Beam angle: 17°. Protection class: IP20 Fan: Without, convection cooled Lamp type: LED lamp Total connected load: 15 W Subject to ecodesign: Yes Special product: Not intended for room lighting in households. Intended use: Lighting for show effects Weight: 2 kg Dimensions (L x W x H): 585 x 65 x 100 mm

Elegant, compact and powerful 4-bar from JB Systems, with 4 x 36 watt COB LED headlamps and 2 selectable beam angles. Features JB-Systems COB-4BAR Elegant and compact powerful 4BAR with 4 energy-saving COB-LED headlamps. NO separate LEDs: Each spotlight has a 36W COB LED with perfect colour mixing and the look of a conventional lamp! Prepared for wireless DMX: simply connect an optional WTR-DMX DONGLE! (optional) Exceptionally high light output (exceeds the light output of traditional PAR56 300W lamps!) IR remote control included in delivery: No heavy controllers required, ideal for DJs! Equipped with 2 power sockets, each with on/off remote control: Each (LED) effect with up to 500 W can be connected! LED spotlight beam angle is 15° with lens or 100° without lens. Ideal for mobile applications: Only 1 m long and weighs only 8 kg! Many application possibilities: Discotheques, DJs, trade fair stands,.... 0-100% dimming and ultra-fast strobe function (no additional strobes required!) Excellent integrated programs for beautiful, varied light shows! Optional foot control available: Ideal for small bands! Alphanumeric 2x 16 character backlit LCD display for easy menu navigation. Including standard 35mm adapter, suitable for our tripods with 35mm mount. The 4BAR comes with a light but sturdy carrying case. Various operating modes: Stand-alone device with IR remote control: Automatic / clock-synchronized colour samples + On/Off control of 2 (optional) lighting effects. Master/Slave mode: Several 4BARs can be used together for beautiful pre-programmed and music-synchronized light shows. Controlled by our well-known LEDCON-02 Mk2 or the optional foot control "COB-4BAR FOOTCONTROL". DMX-controlled: Different channel modes with program selection and single RGB control.

Features Eurolite LED BAR-6 QCL RGBA Operable in stand-alone mode or via DMX DMX512 control possible via any commercially available DMX controller (occupies max. 9 channels) 2, 4, 5, 6, or 9 DMX channels selectable Music control via built-in microphone Microphone sensitivity adjustable via Control Board Convenient addressing and setting via control board with four operating keys and LED display Functions: static colors, RGBA color mixing, color temperature settings, internal programs, dimmer and strobe settings, master/slave Equipped with 6 x 4 W QCL LEDs in the colours red, green, blue and amber Hanging as well as standing mounting possible Locking option on mounting bracket Flicker-free projection Loop-through output for power supply of up to 8 devices Switch-mode power supply technology for mains voltage between 100 and 240 volts Ready for connection via enclosed cold appliance power cable with safety plug Control: DMX Control: Stand-alone Color generation: RGBA Technical data Power supply: 100-240 V AC, 50/60 Hz DMX channels: 2/4/5/6/9 DMX connector: 3-pin XLR Music control: via built-in microphone Flash rate: 20 Hz LED type: 4 W QCL (RGBA) Number of LEDs: 6 Beam angle: 17°. Protection class: IP20 Fan: Without, convection cooled Lamp type: LED lamp Total connected load: 15 W Subject to ecodesign: Yes Special product: Not intended for room lighting in households. Intended use: Lighting for show effects Weight: 2 kg Dimensions (L x W x H): 585 x 65 x 100 mm

Compact and powerful light effect bar from JB Systems consisting of: 2 x LED RGB Derby 2 x LED Spotlight 3x9W RGB 1 x 2-colour laser (red/green) 4 x LED flash LEDs 1 x transport case 1 x IR controller Features JB-Systems Party Bar 4 in 1 - Light effect Pre-programmed light shows with different effect combinations 3,5,6,9 or 27 DMX channels standalone sound-to-light Master/Slave  3-digit LED display  35mm tripod mount Including ceiling mounting brackets IEC Power Inputs & Outputs Key operated on/off switch and socket for emergency stop switch of the laser Conforms to EN/IEC 60825-1 2007 for laser safety Dimensions: 118.5 x 38.6 x 11 cm Weight: 8.35 kg

Features JB-Systems Accu-Lightbar Compact, powerful and affordable LED projector with lithium-ion battery operation. Equipped with 3 swiveling 5 watt 9° LED projectors (3600K & CRI>80). An economical solution for many applications: Buffet lighting, exhibition stands, ... Equipped with 2 magnetic bases: simply snap onto a magnetic surface! 3/8" and 5/8" threads to attach the bar to a microphone stand. 2 Velcro straps for easy mounting on trusses. Autonomy: +/-6 hours of operation at 100% power with a fully charged battery! Equipped with magnetic filter holders for the use of all types of filters: CTO/CTB filters: adjust the CCT to e.g. 4000K, 2700K, ... Color filter: choose any color you like Frost filter: adjust the beam angle 2 operation modes: Controlled by wireless IR remote control (included) Easy manual operation The projector can be used even with an empty battery: just plug it in! The battery is charged while the projector is running on AC power. Technical data Power supply: AC 100 - 240V, 50/60Hz Power consumption: 25 watts IP rating: Indoor Modes: Standalone Fixed, Manual IR remote control Lamp type: LED Color temperature: 3600 K Min. beam angle: 9 Weight: 1.78 kg Dimensions: 360 x 170 x 70 mm

Bar with 6 RGBW spots and 6 white strobe LEDs Features Eurolite LED KLS-180/6 Crossbar with integrated DMX control unit and stand sleeve Ultra-light ideally suited for mobile use Suited for installation on a speaker stand (not included) or truss Comes pre-assembled with practical transport bag 6 spots with 4 powerful 8 W LEDs 4in1 provide for an exquisite RGBW color mix Bar with 6 white 1 W LEDs for strobe effect Movable and tiltable spotlights Via DMX, each spot can be individually controlled DMX-controlled operation or stand-alone operation with Master/Slave function Sound-control via built-in microphone, microphone sensitivity adjustable Supports QuickDMX - the wireless DMX-system from Eurolite Built-in phantom fed socket for QuickDMX receiver (see accessories) 3, 4, 6, 8, 9, 11, 21, 24 or 29 DMX channels selectable Functions: RGBW color mixture, color presets, built-in programs, strobe effects with variable speed, dimmer, sound-control, Master/Slave operation Addressing and setting via control panel with 4-digit LED display Additional controlling possibility via the EUROLITE IR-7 remote control, included in delivery Black or white lacquered metal version with movable mounting bracket LED: Spot 6 x separate controlling each with 4 x high-power 8 W 4in1 QCL RGBW (homogenous color mix) LED: Strobe effect 6 x high-power 1 W CW Can be operated in 3; 4; 6; 8; 9; 11; 21; 24; 29 CH mode The device is cooled by passive convection Controlling by IR remote control; QuickDMX via USB (optional); Stand-alone; Sound to light via Microphone; DMX; Master/slave function Flicker-free projection Technical Data Power supply: 100-240 V AC, 50/60 Hz Power consumption: 90 W IP classification: IP20 Protection class: Class I Power connection: Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided) Power output: 2 x IEC connector (F) mounting version Fuse: T 1 A Fuse replaceable Lamp type: LED lamp LED: Spot 4 x high-power 8 W 4in1 QCL RGBW (homogenous color mix) | Strobe effect 6 x high-power 1 W CW Flash rate: 0 - 20 Hz DMX channels: 3; 4; 6; 8; 9; 11; 21; 24; 29 DMX input: 3-pin XLR (M) mounting version DMX output: 3-pin XLR (F) mounting version Cooling: Passive convection Control: IR remote control; QuickDMX via USB (optional); Stand-alone; Sound to light via Microphone; DMX; Master/slave function Beam angle: 9° Beam angle (1/2 peak): 9° Beam angle (1/10 peak): 18 Display type: 4 digits 7-segment LED display Weight: 6,00 kg Width: 92,6 cm Depth: 14,6 cm Height: 26,7 cm

Features Eurolite LED BAR-12 QCL RGBW Operable in stand-alone mode or via DMX DMX512 control possible via any commercially available DMX controller (occupies max. 9 channels) 2, 4, 5, 6, or 9 DMX channels selectable Music control via built-in microphone Microphone sensitivity adjustable via Control Board Convenient addressing and setting via control board with four operating keys and LED display Functions: static colours, RGBW colour mixing, colour temperature settings, internal programmes, dimmer and strobe settings, master/slave Equipped with 12 x 4 W QCL LEDs in red, green, blue and white Hanging as well as standing mounting possible Locking option on mounting bracket Flicker-free projection Loop-through output for power supply of up to 8 devices Switch-mode power supply technology for mains voltage between 100 and 240 volts Ready for connection via enclosed cold appliance power cable with safety plug Control: DMX Control: Stand-alone Color generation: RGBW Technical data Power supply: 100-240 V AC, 50/60 Hz DMX channels: 2/4/5/6/9 DMX connector: 3-pin XLR Music control: via built-in microphone Flash rate: 20 Hz LED type: 4 W QCL (RGBW) Number of LEDs: 12 Beam angle: 17°. Protection class: IP20 Fan: Without, convection cooled Lamp type: LED lamp Total connected load: 24 W Subject to ecodesign: Yes Special product: Not intended for room lighting in households. Intended use: Lighting for show effects Weight: 3 kg Dimensions (L x W x H): 1085 x 65 x 100 mm

The LED KLS Scan Next FX is equipped with 4 spots for the colored basic lighting, UV LEDs for the popular black light effect and a derby effect for the party atmosphere. But the special feature of this bar is the equipment with two integrated scanners incl. gobo wheel and color wheel. The two scanners are each equipped with a very effective 15-watt LED. The control options of the KLS offer something for every user: even without an external controller, 20 different programs can be set that run either automatically or music-controlled. These programs offer well thought-out, finely color-coordinated shows. The various programs can be called up and colorful moods created via the infrared remote control supplied. Control via an optional baseboard is also possible. There are ten different DMX modes: In the smallest mode with three channels, the automatic and music-controlled programs can be called up and switched. The largest mode with 39 channels allows full control of each fixture, the derby and the scanners. In some modes, the two scanners are controlled together. In the menu, it is then possible to set that one or both axes of movement should be inverted, i.e. mirrored. This facilitates the control and results in a coherent image. The KLS has a USB socket for QuickDMX. An optional DMX radio adapter can be plugged into this to realize wireless DMX transmission. This works not only from one console to the KLS bars, but also with several KLS among themselves for master-slave operation. Features Eurolite LED KLS Scan Next FX DMX light effect bar with 1 rotating LED derby, 4 LED spots, 2 scanners and UV LEDs Absolute lightweight best suited for mobile use Crossbar with integrated DMX control unit and TV spigot for tripod mounting Swiveling mounting brackets for truss mounting Supplied pre-assembled in a practical transport bag Convenient remote control via included IR remote control or optional wireless foot switch Music control via built-in microphone with sensitivity control Many different DMX modes for different consoles and requirements LED derby and LED spots can be individually aligned and controlled Spots with 15° beam angle Mirror movement for both scanners separately invertible (e.g. for common, counter-rotating control) Newly designed software with attractive programs 20 integrated show programs (which include all 4 effect units) in auto and music mode Addressing and settings via control unit with 4-digit OLED display Compatible with QuickDMX - the wireless DMX system from Eurolite Phantom powered USB socket for QuickDMX receiver (accessory) When using fog, this effect is particularly effective P-Con power connectors for easy interconnection of up to 8 units Switching power supply technology for mains voltage between 100 and 240 volts Can be operated in 3; 7; 13; 14; 15; 18; 19; 30; 32; 39 CH DMX mode The device is cooled by a fan Controllable via DMX; QuickDMX via USB (optional); IR remote control (included); music control via microphone; stand-alone; wireless foot switch (optional); master/slave function For application areas such as: Wedding/Gala; Rental company; Small rental company. Technical data Power supply: 100-240 V AC, 50/60 Hz Total connected load: 115 W Protection class: IP20 Protection class: SK I Power connection: Power supply P-Con (blue), built-in version Power connection cable with safety plug (included) Power output: P-Con (gray), built-in version Fuse: 5 x 20 mm, T 2 A fuse replaceable Lamp type: LED lamp Equipment: color wheel; gobo wheel with static gobos DMX channels: 3; 7; 13; 14; 15; 18; 19; 30; 32; 39 DMX input: 1 x 3-pin XLR (M) built-in version DMX output: 1 x 3-pin XLR (W) built-in version Cooling: Fan Control: DMX; QuickDMX via USB (optional); IR remote control (included); music control via microphone; stand-alone; wireless foot switch (optional); master/slave function Beam angle: 15 beam angle (1/2 peak): spot 15° beam angle (1/10 peak): spot 28° Illuminance in lux (lx): R red 1m: 1022 lx, 3m: 125 lx, 6m: 33 lx G green 1m: 2448 lx, 3m: 285 lx, 6m: 75 lx B blue 1m: 395 lx, 3m: 47 lx, 6m: 13 lx WW 1m: 1892 lx, 3m: 219 lx, 6m: 58 lx All 1m: 4853 lx, 3m: 676 lx, 6m: 175 lx Mounting system: TV spigot Ø 28mm Display type: OLED display Floodlight: LED: Spot each 3 x high-power 7W 4in1 QCL RGB/WW (homogeneous color mixing) Light effect: LED: beam effect each 1 x 3 W RGB Movinglight: LED: Scanner each 1 x 15 W CW Strip: LED: 4 x high-power 1 W UV Width: 1.1m Depth: 15,5 cm Height: 43 cm Weight: 12,80 kg

With the KLS-3002 Next, Eurolite presents the next stage of the compact light evolution: with powerful spots and RGBAWUV color mixing. The well-proven combination of 4 spots on a bar, familiar from older KLS models, has remained the same. The most modern versions of LEDs are now being used: 28 units with 10 watts each and a high level of effectiveness ensure high light output. Thanks to color mixing in 6 colors, particularly beautiful shades are possible: in addition to red, green and blue, white and amber provide great pastel and yellow shades. With the UV LEDs, even black light effects are now possible. But also the hardware has changed a lot: For example, the brackets of the individual spots are now even more massive and the power cable is much longer than before. The bar can now also be mounted flying (for example on a traverse). The connectors for this can be attached in seconds with quick-release fasteners. Despite the high light output, the system does not require a fan, so it is absolutely noiseless and does not suck in any dust. Further lighting effects can be screwed onto the bar, two sockets are available for the power connection. If you want to control your system via wireless DMX, you will be happy to have a new USB socket. A Quick DMX receiver can easily be plugged in here. If you want to work completely without any external control, you will be happy about the many well thought-out stand-alone programs. In addition, a static color can now be set for each spot separately for use without a controller. The supplied carrying bag is particularly robust and makes the system easy to transport. Features Eurolite LED KLS-3002 Next DMX light set with four slim-line LED spots 7 high-power 10 W RGBAW/UVLEDs (6in1) per spot erfect solid and pastel colors and stunning blacklight effects thanks to RGBAW/UV color mixing Color and brightness individually adjustable for each spot directly at the control unit Brand-new software design with smart programs Ultra-light ideally suited for mobile use Crossbar with integrated DMX control unit and TV spigot for tripod installation Quick truss installation via quick-lock omega holders Spots movable and tiltable, and with 19° beam angle Comes pre-assembled with practical transport bag Convenient control via included IR remote control or optional wireless foot switch Auto, music, color, master/slave, and DMX mode 20 built-in auto and music show programs Direct color selection for 21 preset colors Convection cooling enables silent operation Addressing and setting via control panel with 4-digit LED display Sound-control via built-in microphone with sensitivity control Supports QuickDMX - the wireless DMX system by Eurolite Built-in phantom-powered USB port for QuickDMX receivers (accessories) Mounting points and power outlets for additional fixtures Ready for connection with power cord and PowerCon input LED: Spot 7 x high-power 10 W 6in1 HCL RGBWA/UV (homogenous color mix) Power connection: Mains input P-Con (blue), mounting version Power supply cord with safety plug (M) (provided) Power output: 2 x IEC connector (F) mounting version fused Control: Stand-alone; QuickDMX viaUSB (optional); Wireless footswitch (optional); IR remote control; Sound to light viaMicrophone; DMX   Technical data Power supply: 110-240 V AC, 50/60 Hz Total connected load: 225 W LED: Spot 7 x high-power 10 W 6in1 HCL RGBWA/UV (homogeneous colour mix) DMX channels: 2; 4; 6; 10; 24; 28 DMX input: 1 x 3-pin XLR (M) Built-in version DMX output: 1 x 3-pin XLR (W) Built-in version Protection class: IP20 Fuse: device fuse 5 x 20 mm, T slow blow, 2.5 A fuse replaceable, mains output fuse 5 x 20 mm, T slow blow, 5 A fuse replaceable Power connection: power supply P-Con (blue), built-in version, power connection cable with earth contact (M) Cable structure: 3 x 1.0 mm² H05VV-F Length of connecting cable: 3 m Current output: 2 x cold devices (W) Fused installation version Fan: Without, convection cooled Beam angle: 19°. Mounting bracket: TV spigot system 28mm Width: 128 cm Height: 29 cm Depth: 8 cm Weight: 11,14 kg

LED light effect strip with WW-COB LEDs, incl. IR remote control Features Eurolite LED CBB-2 COB WW 2 powerful warm white 35 W LEDs (COB) Very high colour rendering index (CRI >90) Auto, Music, Master/Slave and DMX mode Integrated show programs in auto and music mode Dimmer and strobe effect Addressing and settings via control unit with 4-digit LED display Convenient remote control via supplied IR remote control EUROLITE IR-7 Music control via built-in microphone with adjustable microphone sensitivity Compatible with QuickDMX - the wireless DMX system from Eurolite Phantom-powered USB jack for QuickDMX receiver (accessory) DMX512 control possible via any commercially available DMX controller 2, 3 or 5 DMX channels selectable for different applications Pivoting mounting bracket Loop-through output for power supply of up to 8 devices Housing colour: Black Projection: flicker-free Colour rendering index (CRI) greater than: 90 Ra Control: QuickDMX USB; IR remote control (included) LED: 2 x COB (chip-on-board) 35 W WW (homogeneous colour mixing) Technical data Power supply: 100-240 V AC, 50/60 Hz Total connected load: 50 W LED: 2 x COB (chip-on-board) 35 W WW (homogeneous colour mixing) DMX channels: 2/3/5 DMX connector: 3-pin XLR Music control: via built-in microphone QuickDMX connector: USB, Type A LED type: 35 W WW (COB) Number of LEDs: 2 Colour temperature: 2700 K Beam angle: 37°. Flash frequency: 0-20 Hz Subject to ecodesign: Yes Special product: Not intended for room lighting in households. Intended use: Lighting for show effects Lamp type: LED lamp Fan: Yes Protection class: IP20 Beam angle: 37°. Weight: 2,45 kg Dimensions (L x W x H): 240 x 155 x 175 mm

Features Eurolite LED Party UV Bar-9 Ideally suited for lighting and decoration purposes in party cellars, etc. For permanent installation Locking possibility at the mounting brackets Narrow housing Available in two lengths Switch-mode power supply technology for mains voltage between 100 and 240 volts Ready for connection via mains connection cable with safety plug ON/OFF switch on power cord Control: without Color generation: UV Technical data Power supply: 100-240 V AC, 50/60 Hz LED type: 1-W-SMD, UV Number of LEDs: 9 Protection class: IP20 Lamp type: LED lamp Total connected load: 20 W Material: Metal Beam angle: 30 ° Subject to ecodesign: Yes Special product: Not intended for room lighting in households. Intended use: Lighting for show effects Weight: 0.7 kg Dimensions (L x W x H): 500 x 65 x 65 mm Intended use: Lighting for show effects Weight: 0.7 kg Dimensions (L x W x H): 500 x 65 x 65 mm

Light effect strip (60 cm) with RGB+UV colour mixing Features Eurolite LED BAR-6 QCL RGB+UV 6 powerful 4W RGB+UV LEDs (4in1) Auto, Music, Master/Slave and DMX mode Integrated show programs in auto and music mode Direct color selection for 20 colors Infinitely variable RGB+UV color mixing, color change, color fade, dimmer and strobe effect Flicker-free projection Addressing and settings via control unit with 4-digit LED display Music control via built-in microphone with adjustable microphone sensitivity Compatible with QuickDMX - the wireless DMX system from Eurolite Phantom-powered USB jack for QuickDMX receiver (accessory) 2, 4, 5, 6 or 9 DMX channels selectable Pivoting mounting bracket Loop-through output for power supply of up to 8 devices Control: DMX; Stand-alone; QuickDMX LED: %2 %3 x %4 %5 Technical data Power supply: 100-240 V AC, 50/60 Hz DMX channels: 2/4/5/6/9 DMX connector: 3-pin XLR QuickDMX connector: USB, Type A Music control: via built-in microphone LED type: 4 W RGB+UV (4in1) Number of LEDs: 6 Flash rate: 0-20 Hz Beam angle: 20°. Fan: Without, convection cooled Protection class: IP20 Total connected load: 14 W Weight: 1,86 kg Dimensions (L x W x H): 595 x 65 x 103 mm

The KLS-120 represents a very affordable entry into the world of compact lighting systems. Nevertheless, it features 12 ultra-modern LEDs and RGBW color mixing. The power is supplied via an IEC power socket and can also be passed on to other devices via a corresponding IEC output socket. And the QuickDMX USB socket for wireless DMX operation has not been omitted either. The unit is supplied in a convenient carrying bag. The system can be mounted on a standard speaker stand via a tripod sleeve; however, thanks to the integrated rubber feet, the bar can also be placed directly on the floor. Features Eurolite LED KLS-120 Crossbar with integrated DMX control unit and stand sleeve Ultra-light ideally suited for mobile use Ideal for bands, stages or solo entertainers Suited for installation on a speaker stand (not included) or truss Comes pre-assembled with practical transport bag 3 powerful 4in1 LEDs per spot provide for an exquisite RGBW color mix Movable and tiltable spotlights Via DMX, each spot can be individually controlled DMX-controlled operation or stand-alone operation with Master/Slave function Supports QuickDMX - the wireless DMX-system from Eurolite Built-in phantom fed socket for QuickDMX receiver (see accessories) Functions: RGBW color mixture, color presets, built-in programs, strobe effects with variable speed, dimmer, Master/Slave operation Addressing and setting via control panel with 4-digit LED display Additional controlling possibility via the EUROLITE IR-7 remote control, included in delivery Black lacquered metal version with movable mounting bracket IEC terminals for power linking up to 8 units LED: 12 x high-power 8 W 4in1 QCL RGBW (homogenous color mix) Can be operated in 4; 7; 16; 19 CH mode The device is cooled by passive cooling by convection Controling by IR remote control; Stand-alone; DMX; QuickDMX via USB (optional); Master/slave function; Sound to light via Microphone Is in EASY SHOW already preprogrammed Flicker-free projection Technical Data Power supply: 100-240 V AC, 50/60 Hz Power consumption: 30 W IP classification: IP20 Power connection: Mains input IEC connector (M) mounting version Power supply cord with safety plug Power output: IEC connector (F) mounting version Fuse: T 1 A Fuse replaceable LED: 12 x high-power 8 W 4in1 QCL RGBW (homogenous color mix) Flash rate: 0 - 20 Hz DMX channels: 4; 7; 16; 19 DMX input: 3-pin XLR (M) mounting version DMX output: 3-pin XLR (F) mounting version Cooling: Passive cooling by convection Control: IR remote control, Stand-alone, DMX, QuickDMX via USB (optional), Master/slave function, Sound to light via Microphone Beam angle: 18° Beam angle (1/2 peak): 18° Beam angle (1/10 peak): 34° Attachment system: Ø 35mm Width: 61.6 cm Height: 22.6 cm Depth: 10.0 cm Weight: 3.70 kg

The CHAUVET DJ COLORband Hex 9 IRC is a full-colour LED bar that acts as a chase effect, blind or wallwasher. 6-in-1 technology (RGBAW+UV) allows you to create a wide colour spectrum and achieve natural-looking colour temperatures. The COLORband Hex 9 IRC has 3 control zones to create amazing chaser effects. Convenient ready-made programs can be called with or without DMX, but there are several DMX programs available for a variety of programming styles. The COLORband Hex 9 IRC has no moving parts and is ideal for quiet environments due to its quiet operation. Automated programs and the operation of static colors can be controlled wirelessly with the optional IRC-6 remote control, and sound activated programs allow the COLORband Hex 9 IRC to dance to the beat of the music. Features Chauvet DJ COLORband HEX 9 IRC Full-Size LED Bar with 9x 7 Watt RGBAW+UV LEDs Produces a wide range of colors and a more natural color temperature using 6-in-1 LED technology Suitable for use as a chase effect, blind or wall washer Individual 3-zone control for chase effects Infrared sensor for easy operation via optional IRC-6 remote control Includes several DMX variants for a variety of programming options High-quality lenses and RGB LEDs eliminate rainbow shadow effect sound-to-light Technical Specifications DMX channels: 6, 9, 11, 18 or 23 Light source: 9 LEDs (hex-color RGBAW+UV) 7 W (2.4 A), 50,000 hours Beam angle: 21 degrees Illuminance: 2,476 lux @ 2 m Input voltage: 100 to 240 VAC, 50/60 Hz (auto-ranging) Dimensions: 1049 x 82 x 176 mm weight: 5 kg

Features Eurolite LED Party UV Bar-18 Ideally suited for lighting and decoration purposes in party cellars, etc. For permanent installation Locking possibility at the mounting brackets Narrow housing Available in two lengths Switch-mode power supply technology for mains voltage between 100 and 240 volts Ready for connection via mains connection cable with safety plug ON/OFF switch on power cord Control: without Color generation: UV Technical data Power supply: 100-240 V AC, 50/60 Hz LED type: 1-W-SMD, UV Number of LEDs: 18 Protection class: IP20 Lamp type: LED lamp Total connected load: 40 W Material: Metal Beam angle: 30 ° Subject to ecodesign: Yes Special product: Not intended for room lighting in households. Intended use: Lighting for show effects Weight: 1 kg Dimensions (L x W x H): 1000 x 65 x 65 mm

LED lighting effects bar with RGB colour mixing, incl. IR remote control Features Eurolite LED CBB-6 COB RGB Bar 6 powerful 30W RGB LEDs (COB) Auto, Music, Master/Slave and DMX mode Integrated show programs in auto and music mode Direct color selection for 18 colors Infinitely variable RGB color mixing, color change, color fade, dimmer and strobe effect Addressing and settings via control unit with 4-digit LED display Convenient remote control via supplied IR remote control EUROLITE IR-7 Music control via built-in microphone with adjustable microphone sensitivity Compatible with QuickDMX - the wireless DMX system from Eurolite Phantom-powered USB jack for QuickDMX receiver (accessory) DMX512 control possible via any commercially available DMX controller 2, 3, 5, 9, 18 or 21 DMX channels selectable for different applications Pivoting mounting bracket P-Con mains connection with loop-through output for power supply of up to 8 devices Projection: flicker-free Control: QuickDMX USB; IR remote control (included) Technical data LED: 6 x COB (chip-on-board) 30 W 3in1 TCL RGB (homogeneous colour mixing) Power supply: 100-240 V AC, 50/60 Hz Total connected load: 100 W DMX channels: 2/3/5/9/18/21 DMX connector: 3-pin XLR Music control: via built-in microphone QuickDMX connector: USB, Type A LED type: 30 W RGB (COB) Number of LEDs: 6 Beam angle: 38°. Flash frequency: 0-20 Hz Subject to ecodesign: Yes Special product: Not intended for room lighting in households. Intended use: Lighting for show effects Lamp type: LED lamp Weight: 6,20 kg Dimensions (L x W x H): 685 x 165 x 200 mm

Light effect strip (1 m) with UV LEDs Features Eurolite LED BAR-12 UV 12 powerful 1W UV LEDs Auto, Music, Master/Slave and DMX mode Integrated show programs in auto and music mode Dimmer and strobe effect Addressing and settings via control unit with 4-digit LED display Music control via built-in microphone with adjustable microphone sensitivity Compatible with QuickDMX - the wireless DMX system from Eurolite Phantom-powered USB jack for QuickDMX receiver (accessory) 1 or 2 DMX channels selectable Pivoting mounting bracket Mains connections for easy interconnection of up to 8 devices Switch-mode power supply technology for mains voltage between 100 and 240 volts Control: DMX; QuickDMX via USB (optional); Stand-alone Projection: flicker-free Effect: UV; Dimmable Technical data Power supply: 100-240 V AC, 50/60 Hz Total connected load: 25 W Protection class: IP20 LED: 12 x high-power 1 W UV Beam angle: 14°. DMX channels: 1; 2 Fan: Without, because convection cooled Control: DMX QuickDMX via USB (optional), Stand-alone Length: 106 cm Height: 11,5 cm Depth: 8,5 cm Weight: 2,65 kg

The Eurolite Pixel Tower is a versatile, portable lighting system. The system consists of 2 individual light columns, each consisting of 2 rotating segments. The columns can be set up individually or in combination. The whole system comes in a practical transport case that can also be used as a stand. The columns can also be placed on tripods individually or combined. The delivery includes numerous mounting accessories such as TV spigots, sleeves, feet or hanging cubes. This means that the system can not only be placed on tripods, but can also be used vertically or horizontally suspended or standing on the floor.r. Two types of LEDs are used: Each segment consists of 5 powerful 15 Watt RGBW LEDs. The entire system therefore consists of 20 LEDs for the colored light. Each of these LEDs is individually controllable. The beam angle of the LEDs is 8 degrees, but you can widen it considerably using the frost filter supplied. The colored LEDs are optically complemented by a total of 80 warm white LEDs, which provide structure on the left and right and can be controlled separately for each segment. The control can be done via different DMX modes. But even without external control, the possibilities are manifold: 95 different stand-alone programs designed by a German lighting designer can be set directly via the menu. These can run with or without the white ambient LEDs, at different speeds or music-controlled. Features Eurolite LED Pixel Tower Two LED bars with a total of 20 x 15 W RGBW LED (4in1) and 80 x SMD LED in warm white Comprehensive range of accessories for versatile applications included in the delivery Mounting options: singly or combined standing on the supplied case, hanging via mounting adapters, standing or hanging via mounting brackets or via TV spigots TV spigot for installation on stands with 28 mm inner diameter Comes with a professional flight case with transport wheels ideally suited for mobile use and safe storage Each RGBW LED can be controlled individually and, like the warm white LEDs, in four groups Flicker-free projection Every LED bar can be manually rotated centrally at the joint Narrow beam angle, adjustable to a homogeneous and soft light by the removable milky diffuser plates (frost filter) Auto, music and DMX mode Sound-control via built-in microphone with adjustable microphone sensitivity 5, 12, 20, 27 or 84 DMX channels selectable Functions: stepless RGBW color mixture, preset colors, internal programs, dimmer and strobe effect 96 professionally designed integrated show programs in auto and music mode Convenient wireless control via included IR remote control EUROLITE IR-34 Connection between the two LED bars can be extended spatially at will via P-Con and 3-pin XLR cables Addressing and setting via control board with LCD Supports QuickDMX - the wireless DMX system from Eurolite Built-in phantom-powered USB port for QuickDMX receivers (accessories) DMX512 control possible via any commercial DMX controller Power connection via P-Con jack and included power cable with safety plug LED: 20 x SMD 0,3 W WW (homogenous color mix) LED: 5 x high-power 15 W 4in1 QCL RGBW (homogenous color mix) Control: IR remote control; Sound to light viaMicrophone; DMX Technical data DMX connector: 3-pin XLR QuickDMX connector: USB, Type A LED type: 20 x 15 W RGBW (4in1), 80 x 0.3 W WW (SMD) TV spigot: D = 28 mm Dimensions mounted on case (L x W x H): 1090 x 420 x 2000 mm Case dimensions (L x W x H): 1100 x 440 x 180 mm Dimensions LED strip (L x W x H): 1835 x 101 x 70 mm Power supply: 110-240 V AC, 50/60 Hz Total connected load: 250 W LED: 20 x SMD 0.3 W WW (homogeneous colour mixing) 5 x high-power 15 W 4in1 QCL RGBW (homogeneous color mixing) DMX channels: 12; 20; 27; 84; 5 Protection class: IP20 Fan: Without, convection cooled Beam angle: 8° Weight: 12,00 kg

3in1 LED sunbar with warm white beams effects, stroboscope and ambient light Features Eurolite LED STP-14 3 striking effects in one device: beam effect, stroboscope and ambient light 14 warm white 3 W LEDs with 6.5° beam angle for clearly defined beams 120 bright RGB LEDs for mood lighting and color animations 180 cold white LEDs for fast, dynamic strobe effects When fog is used, the effects become especially attractive All 3 LED types are distributed in different segments which can be controlled individually via DMX Auto, music, master/slave and DMX mode Built-in auto and music show programs Direct color selection for 10 preset colors Stepless RGB color blend, chasers, dimmer and strobe effect with variable speed and random Addressing and setting via control panel with 4-digit LED display Sound-control via built-in microphone with adjustable microphone sensitivity 2, 6, 34 or 37 DMX channels selectable 2 swivel mounting brackets P-Con power input and feed-through output to power up to 8 devices Pure convection cooling via cooling ribs, no fans, particularly quiet during operation LED: 180 x SMD CW (homogenous color mix) LED: 120 x SMD 5050 3in1 TCL RGB (homogenous color mix) LED: 14 x high-power 3 W WW (homogenous color mix) Control: Sound to light viaMicrophone; DMX Projection: flicker-free Technical data DMX512 connector: 3-pin XLR Power supply: 110-240 V AC, 50/60 Hz Total connected load: 95 W LED: 180 x SMD CW (homogeneous colour mixing), 120 x SMD 5050 3in1 TCL RGB (homogeneous colour mixing), 14 x high-power 3 W WW (homogeneous colour mixing) DMX channels: 2; 6; 34; 37 Protection class: IP20 Power connection: Power supply P-Con (blue), built-in version Power connection cable with earth contact (M) Fan: Without, convection cooled Beam angle: 6.5° Spot Length: 100 cm Height: 8,5 cm Depth: 9 cm Weight: 3,92 kg

Complete DMX LED light set with rechargeable battery pack Features Eurolite AKKU KLS-180 Crossbar with integrated DMX control unit and stand sleeve Ultra-light ideally suited for mobile use Ideal for bands, stages or solo entertainers Suited for installation on a speaker stand (not included) or truss Comes pre-assembled with practical transport bag Operation via mains connection or built-in rechargeable lithium-ion battery with up to 20 hours operating time Integrated automatic charging of the battery with indicator Energy saving mode 4 powerful 8 W LEDs (4in1) per spot provide for an exquisite RGBW color mix Strobe effect with 4 white 1 W LEDs Movable and tiltable spotlights Each spot can be individually controlled via DMX Built-in auto and music show programs Direct color selection for 20 preset colors Stepless RGBW color blend, color change, color fade, dimmer and strobe effect Supports QuickDMX - the wireless DMX system from Eurolite Built-in phantom-powered USB port for QuickDMX receivers (accessories) DMX512 control via any commercial DMX controller Addressing and setting via control panel with 4-digit LED display Convenient wireless control via included IR remote control EUROLITE IR-7 Black lacquered metal version with movable mounting bracket Switch-mode power supply for operation between 100 and 240 volts IEC terminals for power linking up to 8 units LED: Spot 4 x high-power 8 W 4in1 QCL RGBW (homogenous color mix) LED: Strobe effect 4 x separate controlling each with 4 x high-power 1 W CW Can be operated in 3; 4; 8; 21 CH mode The device is cooled by passive cooling by convection Controling by Master/slave function; IR remote control (provided); Stand-alone; Sound to light via Microphone; DMX; QuickDMX via USB (optional) Is in EASY SHOW already preprogrammed Flicker-free projection Technical Data Power supply: 100-240 V AC, 50/60 Hz IP classification: IP20 Power connection: Battery/battery pack Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided) Power output: IEC connector (F) mounting version Fuse: T 1 A Fuse replaceable Battery pack type: 1 x lithium ion 22.2 V, 4400 mAh, 97.68 Wh Battery pack: Battery operation up to 20h depending on program used Recharging time 5h LED: Spot 4 x high-power 8 W 4in1 QCL RGBW (homogenous color mix) Strobe effect 4 x high-power 1 W CW Flash rate: 0 - 20 Hz DMX channels: 3; 4; 8; 21 DMX input: 3-pin XLR (M) mounting version DMX output: 3-pin XLR (F) mounting version Cooling: Passive cooling by convection Control: Master/slave function, IR remote control (included), Standalone, Sound to light via Microphone, DMX, QuickDMX via USB (optional) Beam angle: 9° Beam angle (1/2 peak): 9° Display type: 4 digits 7-segment LED display Width: 61 cm Height: 27.4 cm Depth: 14.5 cm Weight: 5.90 kg