Products by: Heatscope
A patio, a conservatory or an outdoor area in the catering industry does not need heat around the clock, but exactly when people are sitting there. HEATSCOPE works with directional infrared heat and is therefore aimed at applications where quickly usable heat is more important than heating up large volumes of air.
The brand develops and manufactures its designer infrared heaters in Germany. Its approach combines electrical carbon heating elements with a restrained design language and significantly less visible light than many classic halogen heaters. This is particularly useful where a red-glowing heater would disturb the atmosphere: at set tables, on a loggia, in a conservatory or next to a seating area.
Table of contents for the article
Heat for the area where it is needed
Infrared heaters do not heat the room air first. The radiation hits people and surfaces in the effective range, which is why the heat is immediately noticeable at the seat. This is a practical advantage for areas that are only used occasionally. At the same time, the orientation has more weight than with conventional heating: The heating corridor must match the seating or lounge area.
Wind, installation height, distance and the openness of the area determine how much power and which design are sensible. A heater for a protected patio cannot automatically be transferred to a drafty balcony or an open catering area. For larger areas, a carefully planned arrangement of several heating points is usually more sensible than simply choosing a single heater that is as powerful as possible.
The product idea of HEATSCOPE
HEATSCOPE relies on carbon heating elements in the infrared medium-wave range for its outdoor heaters. This design ensures quickly available, directional heat and reduces the visible glow. This characterises the brand more strongly than a long list of individual models: Heat should be present, but the heater itself should remain visually discreet.
The housing design is not just a decorative point. Glass fronts and grid fronts influence how a heater fits into the environment, how much light remains visible and for which area of application it is intended. Those who integrate the devices into architecture, the catering industry or a high-quality living environment should take these differences just as seriously as wattage and protection class.
Vision and Spot: two approaches for different outdoor areas
The Vision series combines a glass-ceramic front with restrained ambient light. It fits protected or less wind-prone areas, such as conservatories, covered patios and seating areas where the look of the heater plays a visible role. The heat is generated quickly, but the installation should not be planned for an unprotected, very drafty area.
The Spot series is geared towards more heating effect under more demanding outdoor conditions. Its grid front and faster medium wave fit better into open or windier zones. Nevertheless, Spot is no substitute for planning against strong winds. For very open areas, the installation location remains crucial because air movement always influences the perceived heat.
- Protected seating areas: Crucial factors are quiet heat emission, low light effect and an installation that avoids glare.
- More open patios: Here, directed power, distance to the seating group and a protection class suitable for the location count.
- Conservatories and glass houses: The installation must match the construction, the distance to glass surfaces and the electrical installation.
- Catering and events: Several clearly aligned heating zones create a more reliable solution than a single central heater.
Installation and control are part of the selection
With a permanently installed infrared heater, the purchasing decision does not start with the colour. First, the installation location, power supply, minimum clearances and the desired control must be determined. Wall and ceiling mounting each create a different heating corridor. A high installation point expands the covered area, but reduces the intensity at the individual seat.
HEATSCOPE offers accessories and control solutions for this purpose, with which devices can be operated via remote control, control box or home automation, depending on the version. Compatibility is not created by smart control alone. Switching capacity, cabling and the intended device version must match. For installation, ceiling mounting and fixed electrical connections, inspection by a specialist company is required.
What you should look out for with HEATSCOPE
The power in watts is only part of the selection. It does not automatically describe how warm a seat feels. Distance, external wind, design and the angle of the heater together decide the result. A heater precisely aligned with a seating group can therefore be more sensible than a lot of power distributed over an area that is too large or the wrong one.
The protection class must also not be ignored. It determines for which moisture and dust exposure a device is suitable, but not whether every installation location fits equally well. For unprotected outdoor areas, an expressly suitable protection class is required as well as installation according to the manufacturer's instructions. Different conditions apply under a canopy than on an exposed exterior wall.
If the visible light effect is important, it is particularly worth comparing the product families. HEATSCOPE clearly positions itself in the design and comfort segment here. For this reason, the heaters are usually not for an improvised socket solution, but for a coordinated installation. If you do this planning before purchasing, you will get targeted heat in the places where it is really used. You can also find suitable technology for events, outdoor areas and installation in the Light & PA section.
With Heatscope, the concept of conventional radiant heaters has been turned on its head. Instead of conventional halogen light tubes or quartz elements, Heatscope radiant heaters use two spirals of carbon fiber that are energized. This newly developed concept has numerous advantages compared to conventional radiant heaters Very fast warm-up time of less than 60 seconds to full power Uniform and broad heat emission ensures pleasant body heat instead of only spot heating Significantly reduced light emission - Only a subtle shimmering orange ambient light can be heard Very efficient - up to 90% of the energy used is converted directly into heat All radiators produce natural infrared heat in the (fast) IR medium wave range. This heat feels particularly pleasant and works exactly where it is needed - namely directly under the first layers of the skin, but not too deep in the tissue. Heatscope heaters are developed, designed and manufactured in Germany. So front to back, 100% Made in Germany. In addition to the beneficial heat output, the Heatscope radiant heaters can also convince with their elegant design. They nestle elegantly into any ambience and provide a relaxed, unobtrusive overall appearance. All the accessories needed for installation are included. Simply unpack, install and enjoy the warmth. Features Heatscope Vision 2200 Radiant heater for catering, patios and weather-protected outdoor applications Vision model offers wider heat output - Ideal for indoor or wind-protected outdoor use Recommended outdoor temperature use from 10 degrees Patented ventilated reflector heating system provides even heat output Energy-efficient double carbon heating elements with satinized surface Reduced light output with higher heat radiation at the same time Instrumented ceramic glass front Coated aluminum body Incl. complete accessories for wall and ceiling mounting Protection class IP44 - Suitable for weather-protected outdoor use Convenient & easy operation by remote control: on/off, 50%, 100% Maintenance-free and extremely high quality finish - Designed to operate for more than 10,000 hours Planned, designed, developed and manufactured in Germany Technical data Power: 2.200 Watt | 9.57 A Visible light: < 300 lumens Radiant efficiency: > 90 % Max. Power available in 30 to 60 seconds Protection class: IP44 Recommended installation height: 1.8 - 2.5 meters Weight: 8 kg Dimensions (W x D x H): 1160 x 184 x 87 mm Scope of delivery Heatscope Vision 2200 radiant heater Infrared remote control 2x 60mm extension for ceiling mounting 2x 11mm mounting brackets 2x joints for alignment 2x 9mm oval mounting skirts
With Heatscope, the concept of conventional radiant heaters has been turned on its head. Instead of conventional halogen light tubes or quartz elements, Heatscope radiant heaters use two spirals of carbon fiber that are energized. This newly developed concept has numerous advantages compared to conventional radiant heaters Very fast warm-up time of less than 60 seconds to full power Uniform and broad heat emission ensures pleasant body heat instead of only spot heating Significantly reduced light emission - Only a subtle shimmering orange ambient light can be heard Very efficient - up to 90% of the energy used is converted directly into heat All radiators produce natural infrared heat in the (fast) IR medium wave range. This heat feels particularly pleasant and works exactly where it is needed - namely directly under the first layers of the skin, but not too deep in the tissue. Heatscope heaters are developed, designed and manufactured in Germany. So front to back, 100% Made in Germany. In addition to the beneficial heat output, the Heatscope radiant heaters can also convince with their elegant design. They nestle elegantly into any ambience and provide a relaxed, unobtrusive overall appearance. All the accessories needed for installation are included. Simply unpack, install and enjoy the warmth. Features Heatscope Vision 3200 Radiant heater for catering, patios and weather-protected outdoor applications Vision model offers wider heat output - Ideal for indoor or wind-protected outdoor use Recommended outdoor temperature use from 10 degrees Patented ventilated reflector heating system provides even heat output Energy-efficient double carbon heating elements with satinized surface Reduced light output with higher heat radiation at the same time Instrumented ceramic glass front Coated aluminum body Incl. complete accessories for wall and ceiling mounting Protection class IP44 - Suitable for weather-protected outdoor use Convenient & easy operation by remote control: on/off, 50%, 100% Maintenance-free and extremely high quality finish - Designed to operate for more than 10,000 hours Planned, designed, developed and manufactured in Germany Technical data Power: 3.200 Watt | 13.91 A Visible light: < 300 lumens Radiant efficiency: > 90 % Max. Power available in 30 to 60 seconds Protection class: IP44 Recommended installation height: 1.8 - 2.5 meters Weight: 11 kg Dimensions (W x D x H): 1660 x 184 x 87 mm Scope of delivery Heatscope Vision 3200 radiant heater Infrared remote control 2x 60mm extension for ceiling mounting 2x 11mm mounting brackets 2x joints for alignment 2x 9mm oval mounting skirts
With Heatscope, the concept of conventional radiant heaters has been turned on its head. Instead of conventional halogen light tubes or quartz elements, Heatscope radiant heaters use two spirals of carbon fiber that are energized. This newly developed concept has numerous advantages compared to conventional radiant heaters Extremly fast warm-up time of less than 15 seconds to full power Uniform and broad heat emission ensures pleasant body heat instead of only spot heating Significantly reduced light emission - Only a subtle shimmering orange ambient light can be heard Very efficient - up to 94% of the energy used is converted directly into heat All radiators produce natural infrared heat in the (fast) IR medium wave range. This heat feels particularly pleasant and works exactly where it is needed - namely directly under the first layers of the skin, but not too deep in the tissue. Heatscope heaters are developed, designed and manufactured in Germany. So front to back, 100% Made in Germany. In addition to the beneficial heat output, the Heatscope radiant heaters can also convince with their elegant design. They nestle elegantly into any ambience and provide a relaxed, unobtrusive overall appearance. All the accessories needed for installation are included. Simply unpack, install and enjoy the warmth. Features Heatscope Spot 2200 Radiant heater for catering, patios and outdoor applications Spot model provides more localized heat output - Ideal for exposed, wind-prone areas Can also be used at lower temperatures Patented ventilated reflector heating system provides even heat output Energy-efficient double carbon heating elements with satinized surface Reduced light output with higher heat radiation at the same time Louvered protective grille Coated aluminum body Incl. complete accessories for wall and ceiling mounting Protection class IP44 - Suitable for weather-protected outdoor use Convenient & easy operation by remote control: on/off, 50%, 100% Maintenance-free and extremely high quality finish - Designed to operate for more than 10,000 hours Planned, designed, developed and manufactured in Germany Technical data Power: 2.200 Watt | 9.57 A Visible light: < 600 lumens Radiant efficiency: > 94 % Max. Power available in less than 15 seconds Protection class: IP24 Recommended installation height: 1.8 - 3.0 meters Weight: 4.5 kg Dimensions (W x D x H): 810 x 184 x 78 mm Scope of delivery Heatscope Spot 2200 radiant heater Infrared remote control 2x 60mm extension for ceiling mounting 2x 11mm mounting brackets 2x joints for alignment 2x 9mm oval mounting skirts
With Heatscope, the concept of conventional radiant heaters has been turned on its head. Instead of conventional halogen light tubes or quartz elements, Heatscope radiant heaters use two spirals of carbon fiber that are energized. This newly developed concept has numerous advantages compared to conventional radiant heaters Extremly fast warm-up time of less than 15 seconds to full power Uniform and broad heat emission ensures pleasant body heat instead of only spot heating Significantly reduced light emission - Only a subtle shimmering orange ambient light can be heard Very efficient - up to 94% of the energy used is converted directly into heat All radiators produce natural infrared heat in the (fast) IR medium wave range. This heat feels particularly pleasant and works exactly where it is needed - namely directly under the first layers of the skin, but not too deep in the tissue. Heatscope heaters are developed, designed and manufactured in Germany. So front to back, 100% Made in Germany. In addition to the beneficial heat output, the Heatscope radiant heaters can also convince with their elegant design. They nestle elegantly into any ambience and provide a relaxed, unobtrusive overall appearance. All the accessories needed for installation are included. Simply unpack, install and enjoy the warmth. Features Heatscope Spot 1600 Radiant heater for catering, patios and outdoor applications Spot model provides more localized heat output - Ideal for exposed, wind-prone areas Can also be used at lower temperatures Patented ventilated reflector heating system provides even heat output Energy-efficient double carbon heating elements with satinized surface Reduced light output with higher heat radiation at the same time Louvered protective grille Coated aluminum body Incl. complete accessories for wall and ceiling mounting Protection class IP44 - Suitable for weather-protected outdoor use Convenient & easy operation by remote control: on/off, 50%, 100% Maintenance-free and extremely high quality finish - Designed to operate for more than 10,000 hours Planned, designed, developed and manufactured in Germany Technical data Power: 1.600 Watt | 6.96 A Visible light: < 600 lumens Radiant efficiency: > 94 % Max. Power available in less than 15 seconds Protection class: IP24 Recommended installation height: 1.8 - 3.0 meters Weight: 4 kg Dimensions (W x D x H): 670 x 184 x 78 mm Scope of delivery Heatscope Spot 1600 radiant heater Infrared remote control 2x 60mm extension for ceiling mounting 2x 11mm mounting brackets 2x joints for alignment 2x 9mm oval mounting skirts
With Heatscope, the concept of conventional radiant heaters has been turned on its head. Instead of conventional halogen light tubes or quartz elements, Heatscope radiant heaters use two spirals of carbon fiber that are energized. This newly developed concept has numerous advantages compared to conventional radiant heaters Very fast warm-up time of less than 60 seconds to full power Uniform and broad heat emission ensures pleasant body heat instead of only spot heating Significantly reduced light emission - Only a subtle shimmering orange ambient light can be heard Very efficient - up to 90% of the energy used is converted directly into heat All radiators produce natural infrared heat in the (fast) IR medium wave range. This heat feels particularly pleasant and works exactly where it is needed - namely directly under the first layers of the skin, but not too deep in the tissue. Heatscope heaters are developed, designed and manufactured in Germany. So front to back, 100% Made in Germany. In addition to the beneficial heat output, the Heatscope radiant heaters can also convince with their elegant design. They nestle elegantly into any ambience and provide a relaxed, unobtrusive overall appearance. All the accessories needed for installation are included. Simply unpack, install and enjoy the warmth. Features Heatscope Vision 1600 Radiant heater for catering, patios and weather-protected outdoor applications Vision model offers wider heat output - Ideal for indoor or wind-protected outdoor use Recommended outdoor temperature use from 10 degrees Patented ventilated reflector heating system provides even heat output Energy-efficient double carbon heating elements with satinized surface Reduced light output with higher heat radiation at the same time Instrumented ceramic glass front Coated aluminum body Incl. complete accessories for wall and ceiling mounting Protection class IP44 - Suitable for weather-protected outdoor use Convenient & easy operation by remote control: on/off, 50%, 100% Maintenance-free and extremely high quality finish - Designed to operate for more than 10,000 hours Planned, designed, developed and manufactured in Germany Technical data Power: 1.600 Watt | 6.96 A Visible light: < 300 lumens Radiant efficiency: > 90% Max. Power available in 30 to 60 seconds Protection class: IP44 Recommended installation height: 1.8 - 2.5 meters Weight: 6 kg Dimensions (W x D x H): 810 x 184 x 87 mm Scope of delivery Heatscope Vision 1600 radiant heater Infrared remote control 2x 60mm extension for ceiling mounting 2x 11mm mounting brackets 2x joints for alignment 2x 9mm oval mounting skirts
With Heatscope, the concept of conventional radiant heaters has been turned on its head. Instead of conventional halogen light tubes or quartz elements, Heatscope radiant heaters use two spirals of carbon fiber that are energized. This newly developed concept has numerous advantages compared to conventional radiant heaters Extremely fast warm-up time of less than 15 seconds to full output Uniform and broad heat emission ensures pleasant body heat instead of only spot heating Significantly reduced light emission - Only a subtle shimmering orange ambient light can be heard Very efficient - up to 94% of the energy used is converted directly into heat All radiators produce natural infrared heat in the (fast) IR medium wave range. This heat feels particularly pleasant and works exactly where it is needed - namely directly under the first layers of the skin, but not too deep in the tissue. Heatscope heaters are developed, designed and manufactured in Germany. So front to back, 100% Made in Germany. In addition to the beneficial heat output, the Heatscope radiant heaters can also convince with their elegant design. They nestle elegantly into any ambience and provide a relaxed, unobtrusive overall appearance. All the accessories needed for installation are included. Simply unpack, install and enjoy the warmth. Features Heatscope Spot 2800 Radiant heater for gastronomy, terraces and outdoor use Spot model provides more spot heat - Ideal for exposed, wind-prone areas Can also be used at lower temperatures Patented rear-ventilated reflector heating system provides even heat output Energy-efficient double carbon heating elements with satinized surface Reduced light output with higher heat radiation at the same time Louvered protective grille Coated aluminum body Incl. complete accessories for wall and ceiling mounting Protection class IP24 - suitable for outdoor use Convenient & easy operation via remote control: On/Off, 50%, 100% Maintenance-free and extremely high quality finish - Designed to operate for more than 10,000 hours Planned, designed, developed and manufactured in Germany Technical data Power: 2.800 Watt | 12.17 A Visible light: < 600 lumens Radiant efficiency: > 94 Max. Power available in less than 15 seconds Protection class: IP24 Recommended installation height: 1.8 - 3.0 meters Weight: 5.0 kg Dimensions (W x D x H): 884 x 184 x 78 mm Scope of delivery Heatscope Spot 2800 radiant heater Infrared remote control 2x 60mm extension for ceiling mounting 2x 11mm mounting brackets 2x joints for alignment 2x 9mm oval mounting aprons
Usually HEATSCOPE PURE design radiant heaters and NEXT Energy heaters are installed on the wall or ceiling. However, in order to be able to use the radiators flexibly on the terrace or in the garden, the HEATSCOPE STAND design-stand system was designed and constructed. With the help of the HEATSCOPE STAND, heat comes to any place in the garden or on the terrace - and in its most beautiful and pleasant form. Specific weather protection is not necessary with the STAND: PURE and NEXT has IPX5 protection class against water jets from all directions. Thus, the radiant heater together with the STAND can be used anywhere outdoors - even heavy rain or snowfall will not bother it at all. The best thing about the STAND: the radiation angle of the heat can be adjusted individually - just like wall or ceiling mounting! The HEATSCOPE® STAND was designed and developed exclusively for the HEATSCOPE model series PURE + NEXT. Unfortunately, it does not work with the ambient heaters VISION or the power heater SPOT nor with heaters of other manufacturers. Features Heatscope Stand Stand suitable for all Heatscope PURE or NEXT radiant heaters Suitable for outdoor use Base made of galvanized steel Mounting bracket made of powder-coated stainless steel Connecting spar made of powder-coated aluminum Adjustable beam angle Completely weatherproof Supplied with Schuko plug and ILME plug (spotlight side) Technical data Connection: 220-240 V AC~ Protection class: IP65 Weight: 25.5 kg Dimensions: ø 600 x 2151 mm The radiant heaters shown in the photos are NOT included in the scope of delivery.
SMARTBOX is THE control unit for the HEATSCOPE® PURE! Simply mount it between the power supply and the heater and it is possible to switch the PURE ON and OFF, reduce it to 50% power or go back to full 100% with the included HEATSCOPE® IR remote control. Features Heatscope Smartbox Smartbox for advanced control of the PURE radiant heater Horizontal & vertical mountable - directly on the heater, next to it, etc. Combination mounting bracket - for installation directly on the radiator Convex shaped translucent front screen Plastic housing With HEATSCOPE® infrared remote control With wall/ceiling mounting plate for installation with PURE mounting bracket Auto power off after 4, 6 or 8 hours (deactivation possible) IP protection class 65 - installation without weather protection! Remote control + batteries included Technical data Connection: 220-240 V AC~ Weight: 0,35 kg / 0,51 kg incl. mounting plate Protection class: IP65 Dimensions: 100 x 170 x 35,5 mm
SMARTBOX is THE control unit for the HEATSCOPE® PURE! Simply mount it between the power supply and the heater and it is possible to switch the PURE ON and OFF, reduce it to 50% power or go back to full 100% with the included HEATSCOPE® IR remote control. For those who already have a somfy® I/O controller in use, the SMARTBOX is also available as a separate somfy® version for integration into an existing I/O system. Features Heatscope Smartbox SOMFY Smartbox for extended control of the PURE radiant heater Horizontal & vertical mountable - directly at the radiator, next to it etc. Combination mounting bracket - for installation directly on the radiator Convex shaped translucent front screen Plastic housing Somfy® I/O version With wall/ceiling mounting plate for installation with PURE mounting bracket IP protection class 65 - installation without weather protection! Technical data Connection: 220-240 V AC~ Weight: 0,35 kg / 0,51 kg incl. mounting plate Protection class: IP65 Dimensions: 100 x 170 x 35,5 mm
With the HEATSCOPE NEXT 3000, you get a powerful infrared heater for terraces, balconies, conservatories, and other open or sheltered areas. Two carbon heating elements generate noticeable radiant heat within a short time at an output of 3000 watts. At the same time, the visible light output remains comparatively low at less than 600 lumens. The slim aluminium housing with a convex front grille is available in black or white and can be mounted on the wall or ceiling. Inside, two powerful carbon heating elements work together with a specially developed reflector system. As a result, the heater reaches its maximum heating output within approximately 20 seconds. The heat is emitted directly into the desired area rather than having to heat large volumes of air first. With 3000 watts, the model is designed for areas of up to approximately 3.5 x 2.5 metres, according to the manufacturer. In sheltered areas, for example, a seating area with up to eight people can be heated. Operation is both silent and odourless. The 4-pin supply cable allows for operation with 50 or 100 percent heating output. With the base version, switching is done manually on the device or via an external power level switch. This allows you to adjust the heat output to the temperature and usage situation without having to turn the heater on or off completely. For more convenient control, the heater can be upgraded with a separately available SMARTBOX. This allows On/Off switching as well as the two power levels to be controlled via remote control. Integration into corresponding smart home systems such as Somfy, Elsner, Loxone, or KNX is also possible, depending on the control system used. The required mounting bracket is included in the scope of delivery. You can align the beam angle to the desired area using the adjustable joint. The NEXT can be mounted both horizontally and vertically. With a housing length of around 104 cm, the design remains comparatively slim despite the high heating output. The heater is suitable for you if you are looking for a direct heat source for covered or sheltered outdoor areas and value low visible light output. Typical places of use include terraces, balconies, verandas, conservatories, inner courtyards, spa areas, and outdoor catering areas. Thanks to the two power levels, the device can be used flexibly both during cooler transitional periods and at lower temperatures. Features HEATSCOPE NEXT 3000 Infrared heater with 3000 watts output for private and commercial indoor and outdoor areas Two carbon heating elements for fast and direct heat generation Maximum heating output within approximately 20 seconds Two power levels with 50 and 100 percent heating output Low visible light output of less than 600 lumens Suitable for heating areas of up to approximately 3.5 x 2.5 metres Silent and odourless operation without fans Horizontal or vertical wall and ceiling mounting possible Mounting bracket with adjustable joint for beam angle alignment Optionally controllable with SMARTBOX and remote control Integration into compatible smart home systems such as Somfy, Elsner, Loxone or KNX possible Aluminium housing with convex front grille available in black or white Technical Data Heating technologyCarbon infrared heating elements Output3000 W Power levels50 % | 100 % Voltage230 V AC Mains frequency50 Hz Visible light< 600 lumens Time to maximum outputapprox. 20 seconds Protection classIP25 Recommended installation height1.80 to 2.50 m Recommended heating areaup to approx. 3.5 x 2.5 m Supply cable4-pin without plug Cable length1.10 m Mountinghorizontal or vertical | wall or ceiling Weight7.5 kg Dimensions (W x D x H)1044 x 166 x 87 mm Included in delivery HEATSCOPE NEXT 3000 infrared heater Mounting accessories for wall or ceiling mounting Mounting bracket with adjustable joint
The smart lift control allows you to integrate a HEATSCOPE infrared heater cleanly into the ceiling while ensuring safe operation at all times. The system automatically extends the mounted heater out of the ceiling cut-out as soon as you switch it on – and retracts it again after a defined cool-down period. This keeps the installation discreet, functional, and reliably protects the device from heat buildup. Automatic extension and retraction mechanism The integrated electronics reliably detect as soon as current over 0.5 A is flowing and activate the lift mechanism. The heater is then lowered about 13 cm from the ceiling to ensure the necessary air circulation. After switching off, the unit automatically retracts again after a cool-down time of 180 seconds. The fully automated process ensures that you never have to worry about anything and that the technology always operates within the optimal range. Compact design for various installation scenarios The lift mechanism consists of a robust joint construction with a powerful linear actuator. With its slim design, the unit is suitable for a wide range of ceiling cut-outs and installation environments – from conservatories to terraces and covered hospitality areas. Optionally available installation cassettes and frames allow for a flush and visually clean integration. The flexible adaptability makes the system attractive for modern interior and exterior architecture. Safe and reliable control The control box is installed in close proximity to the ceiling opening and monitors both motor operation and temperature. If the electronics rise above 60 °C, the lift will only extend to prevent damage. In addition, the control unit provides visual feedback via multicolour LEDs that clearly indicate the system status. The intelligent safety logic ensures that operation always remains controlled and protected. Developed for HEATSCOPE VISION and SPOT The complete lift system is designed exclusively for HEATSCOPE VISION and SPOT heaters and is perfectly matched to their performance and mode of operation. Only in this combination is heat dissipation correctly managed and the mechanics precisely controlled. The specially tuned compatibility guarantees long-term reliability and smooth operation. Features Heatscope LIFT Smart ceiling installation solution for fully automatic lowering and retracting of a HEATSCOPE infrared heater Automatic extension when current exceeds 0.5 A and automatic retraction after approx. 180 seconds Robust lift module with joint mechanism and 24 V linear actuator Control box with integrated current monitoring, temperature control, and LED status indicators Option for flush ceiling installation using optional installation cassette or frame Suitable for HEATSCOPE VISION and SPOT models according to manufacturer approval Installation in covered outdoor areas, hospitality, conservatories, terraces, and more Safe operation thanks to overtemperature protection and defined lift paths Compact control box for installation next to the ceiling cut-out Technical data Voltage: 24 V DC Operating voltage (heater control): 220–240 V AC ~ 50/60 Hz Drive: Linear lift cylinder, 24 V DC Max. motor current: 1.5 A Measuring circuit: 2 current paths | max. 230 V AC 16 A | same phase Recommended installation height: 1.80 m to 2.50 m Cool-down time: 3 minutes Protection class: IP 30 Dimensions lift system: 584 x 100 x 207 mm Dimensions control box: 235 x 165 x 95 mm Weight (lift system without heater): 4 kg Total weight: 25.5 kg Dimensions (W x D x H): 584 x 207 x 100 mm Suitable for Spot and Vision heaters – delivery does not include heater