Set filter:
Filter
–
Products from: Audiophony
%
Audiophony MOJO2200curve
This new system uses a curve array architecture that provides an optimised, controlled sound diffusion at a sound pressure level of 128dB SPL. With a total of 12 loudspeakers, the satellite has been specially designed to achieve an effective aperture of 100° horizontal and 70° vertical. Bass is provided by a powerful 12-inch long-excursion bass driver mounted in a bass-reflex subwoofer. The latter accommodates class D amplification with all the protections, a 4-input mixer with TWS Bluetooth® and a powerful DSP offering the possibility to adjust the sound according to your desires. You also can send music from your mobile to the MOJO2200curve Bluetooth® module.Thanks to the “True Wireless Stereo” technologie it will transmit the audio signal to a second MOJO and you'll enjoy stereo mode! Installation is simplified thanks to the pneumatic coupling bar, which allows effortless height adjustment and also provides a wired connection between the amplifier and the satellite. Technical Data Column Power: 300W RMS - 600W max. Nominal impedance: 6 Ohms Boomer: 3 X 5" neodynium Tweeter: 9 x 1" Dispersion: 120° x 70° (HxV) Connector: Insert into housing Dimensions: 188 x 517 x 243 mm Weight: 8 kg Technical Data Subwoofer Power: 500W RMS -1000W max. Nominal impedance: 4 Ohms Boomer: 1 x 12 inches Dimensions: 366 x 625 x 541 mm Weight: 27 kg Complete system Frequency response 38 - 18,000Hz SPL max. (@1m) 128 dB Low stage: 1 x 700W RMS / 1400W Max at 6 Ohms Mid/high stage 1 x 300W RMS / 600W Max at 4 Ohms DSP: 24 bit (1 in 2 out) EQ / Presets / low cut / Delay / Bluetooth® TWS
€1,223.00* was €1,499.00* (18.41% saved)
Available immediately
%
Audiophony NOVA-10A
Audiophony's NOVA Series loudspeakers are the ideal solution for live performances or installations, delivering high performance for all requirements. The reproduction is clear, warm, with an ideal low frequency spectrum, adapted to vocal, live or recorded sessions. They are easy to install, lightweight and compact, and can be integrated into any setup thanks to numerous connection options. Additionally, you can stream music from your tablet or smartphone directly to the Nova speakers via the Bluetooth Reciever. A built-in DSP with 4 presets lets you quickly and easily adjust the sound to suit the environment, while built-in protections (short circuit, overheat & limiter) ensure safe operation. The Nova series is the best you can find for single installations without compromising quality, performance or capabilities. Technical data Bi-Amp: 150 W Class D for low frequency | 50 W Class AB for high frequency Power: 200 W RMS / 800 W peak Frequency response : 60 - 20.000 Hz H x V dispersion angle : 120° x 60 Sound pressure level : 120 dB max. Woofer: 10 inch | 4 Ohm | 170W RMS Tweeter: 1 inch | 8 Ohm | 50W RMS Inputs: 2 XLR and jack MIC/LINE inputs | 1 AUX input on 3.5 jack | BLUETOOTH + TWS Output: 1 XLR line output Settings :Volume settings for each zone | HIGH/LOW +/- 12 dB main volume settings DSP: 4 presets: Standard | Vocal Boost | Live | Stage Monitor Protective measures: Short circuit | Overheat | Limiter Mounting: 2x M8 mounting points (bottom) | 35 mm mounting plate for a speaker stand Weight: 10.85 kg Dimensions (W x D x H): 320 x 287 x 505 mm
€231.00* was €389.00* (40.62% saved)
Available immediately
%
Audiophony NOVA-12A
Audiophony's NOVA Series loudspeakers are the ideal solution for live performances or installations, delivering high performance for all requirements. The reproduction is clear, warm, with an ideal low frequency spectrum, adapted to vocal, live or recorded sessions. They are easy to install, lightweight and compact, and can be integrated into any setup thanks to numerous connection options. Additionally, you can stream music from your tablet or smartphone directly to the Nova speakers via the Bluetooth Reciever. A built-in DSP with 4 presets lets you quickly and easily adjust the sound to suit the environment, while built-in protections (short circuit, overheat & limiter) ensure safe operation. The Nova series is the best you can find for single installations without compromising quality, performance or capabilities. Technical data Bi-Amp: 300 W Class D for low frequency | 50 W Class AB for high frequency Power: 350 W RMS / 1400 W peak Frequency response : 55 - 20.000 Hz H x V dispersion angle : 120° x 60 Sound pressure level : 121 dB max. Woofer: 12 inch | 4 Ohm | 350 W RMS Tweeter: 1 inch | 8 Ohm | 50 W RMS Inputs: 2 XLR and jack MIC/LINE inputs | 1 AUX input on 3.5 jack | BLUETOOTH + TWS Output: 1 XLR line output Settings :Volume settings for each zone | HIGH/LOW +/- 12 dB main volume settings DSP: 4 presets: Standard | Vocal Boost | Live | Stage Monitor Protective measures: Short circuit | Overheat | Limiter Mounting: 2x M10 mounting points (bottom) | 2x M10 mounting points (top) | 35 mm mounting plate for a speaker stand Weight: 15.80 kg Dimensions (W x D x H): 385 x 345 x 595 mm
€338.00* was €429.00* (21.21% saved)
Available immediately
%
Audiophony NOVA-15A
Audiophony's NOVA Series loudspeakers are the ideal solution for live performances or installations, delivering high performance for all requirements. The reproduction is clear, warm, with an ideal low frequency spectrum, adapted to vocal, live or recorded sessions. They are easy to install, lightweight and compact, and can be integrated into any setup thanks to numerous connection options. Additionally, you can stream music from your tablet or smartphone directly to the Nova speakers via the Bluetooth Reciever. A built-in DSP with 4 presets lets you quickly and easily adjust the sound to suit the environment, while built-in protections (short circuit, overheat & limiter) ensure safe operation. The Nova series is the best you can find for single installations without compromising quality, performance or capabilities. Technical data Bi-Amp: 300 W Class D for low frequency | 50 W Class AB for high frequency Power: 350 W RMS / 1400 W peak Frequency response : 50 - 20.000 Hz H x V dispersion angle : 120° x 60 Sound pressure level : 122 dB max. Woofer: 15 inch | 4 Ohm | 350 W RMS Tweeter: 1 inch | 8 Ohm | 50 W RMS Inputs: 2 XLR and jack MIC/LINE inputs | 1 AUX input on 3.5 jack | BLUETOOTH + TWS Output: 1 XLR line output Settings :Volume settings for each zone | HIGH/LOW +/- 12 dB main volume settings DSP: 4 presets: Standard | Vocal Boost | Live | Stage Monitor Protective measures: Short circuit | Overheat | Limiter Mounting: 2x M10 mounting points (bottom) | 2x M10 mounting points (top) | 35 mm mounting plate for a speaker stand Weight: 21.35 kg Dimensions (W x D x H): 460 x 415 x 705 mm
€431.00* was €519.00* (16.96% saved)
Expected to be available: 19 November 2024
%
Audiophony Mojo500 Line
The active bass + column system from Audiophony Mojo500 Line will convince you with its presence. The precisely calculated position of each individual loudspeaker creates a very clean room coverage (loudspeaker system height = over 2 meters). In addition, an internal compressor ensures excellent sound and top performance. In addition, the system is an absolute lightweight with less than 15 kg and thus very easy to transport. Features Audiophony Mojo500 Line 3 channel mixer with Bluetooth® connection 120° Horizontal angle of radiation 1x Line Out 2-band EQ 2x instrument or microphone input (XLR/jack) Simple plug connection Technical data Speaker Bar Power: 100W RMS 200W max. Frequency range: 180 - 20,000 Hz SPL max. (@1m): 116 dB Nominal impedance: 4 Ohm Speakers: 6 x 2.75 inch Dispersion: 120° x 20° (HxV) Connection: integrated in base Dimensions : (80 x 80 x 830 mm) x2 Net weight: 2.45 kg + 1.20 kg = 3.65 kg Technical data Housing Power: 150W RMS, 300W max. Frequency range: 50 - 20,000 Hz SPL max. (@1m): 116 dB Nominal impedance: 4 Ohm Woofer: 8 inch Weight: 10,8 kg Dimensions: 340 x 430 x 400 mm Amplifiers Bass: 1 x 150W RMS / Class D 4 Ohm Midrange/Tweeter: 1 x 100W RMS / Class D 4 Ohm
€579.00* was €699.00* (17.17% saved)
Available at short notice
%
Audiophony WiCASTamp30+
Audiophony's WICASTamp30+ is an innovative wireless player and distributor that allows you to turn your existing speakers, soundbars or home theater system into a wireless multi-zone sound system. Easy and fast through the home wifi network. For an even more stable connection, an RJ-45 network port is also available to integrate the amplifier into the LAN network. The WICASTamp30+ is equipped with DLNA technology. It offers the possibility to exchange files between multimedia devices. Additionally, Apple's AirPlay technology is supported. All well-known streaming services like Spotify, Deezer, Tidal, Napster, Tune-In or Qobuz are supported, or you can simply use the free WIIM Player for Android or iOS to play your media. Features Audiophony WiCASTamp30+ Integrated amplifier with 2x 30 watts into 8 ohms 1x 3,5mm mini jack input (analog) Compatible with Linkplay (Amazon Music, Spotify, Napster, Qobuz, ...) Bluetooth®, Airplay2, DLNA W-Lan antenna RJ45 connector USB port Alarm clock function Programmable stop function Infrared remote control included Technical data Power supply 19V / 3,16A (external power supply) Weight 0,215 kg Dimensions (W x D x H): 145 x 75 x 33 mm
€149.00* was €169.00* (11.83% saved)
Available immediately
%
Audiophony Atom10A
The ATOM10A is a professional active loudspeaker from Audiophony. The lightweight plastic speaker, with a power of 300W RMS, is ideal for mobile sound reinforcement or as an active monitor on stage. The bi-amping technology with separate amplifier for bass and tweeter and the adjustable DSP provides powerful performance with a balanced sound. Features Audiophony Atom10A Adjustable DSP Equipped with a 10" high performance bass and a 1" high frequency driver. 2 adjustable inputs (MIC/LINE via Combo XLR/jack and one LINE input via Cinch or Mini jack) Symmetrical LINE output Integrated M10 mounting points (top) Integrated 35 mm tripod mount with 2 positions (0° and 7.5°) Angles for monitor applications included sturdy handle Sturdy rubber feet Technical data 250W RMS Class D for LF 50W RMS Class AB for HF Total power: 1200W dynamic / 300W RMS Frequency range: 60 - 20,000 Hz Filter cut-off frequency: 2.8 KHz Sound pressure level: 121 dB max. Woofer: 10". / 2" coil / 4 Ohm / 250W AES Tweeter: 1.35" compression / 8 Ohm / 50 W RMS 2 fixing points M10 (top) Weight: 11.3 kg Dimensions: 531 x 310 x 300 mm
€439.00* was €519.00* (15.41% saved)
Expected to be available: 19 November 2024
%
Audiophony Atom15A
The ATOM15A is a professional active loudspeaker from Audiophony. The plastic speaker, with a power of 400W RMS, is ideal for mobile sound reinforcement or as an active monitor on stage. The bi-amping technology with separate amplifier for bass and tweeter and the adjustable DSP provides powerful performance with a balanced sound. Features Audiophony Atom15A Adjustable DSP Equipped with a 15" high performance bass and a 1.35" high frequency driver. 2 adjustable inputs (MIC/LINE via Combo XLR/jack and one LINE input via Cinch or Mini jack) Symmetrical LINE output Integrated M10 mounting points (top) Integrated 35 mm tripod mount with 2 positions (0° and 7.5°) Angles for monitor applications included sturdy handle Sturdy rubber feet Technical data 350W RMS Class D for LF 50W RMS Class AB for HF Total power: 1600W dynamic / 400W RMS Frequency range: 45 Hz 20 KHz Filter cut-off frequency: 3.4 KHz Sound pressure level: 124 dB max. Woofer: 15". / 3" coil / 4 Ohm / 350W AES Tweeter: 1.35" compression / 8 Ohm / 50 W RMS 2 fixing points M10 (top) Weight: 20,6 kg Dimensions: 728 x 425 x 415 mm
€519.00* was €649.00* (20.03% saved)
Expected to be available: 19 November 2024
%
Audiophony RACER 250
The Audiophony RACER 250 is a battery-powered speaker system that represents the perfect blend of sound quality, versatility, and user-friendliness, designed for discerning users who demand nothing less.
Outstanding sound quality is the hallmark of the RACER 250. The carefully calibrated 12-inch woofers and 1.35-inch tweeters deliver impressively clear and dynamic audio. The built-in 2-band EQ settings allow you to tailor the sound to your personal preferences.
For audio playback flexibility, the built-in USB/SD player with the latest Bluetooth 5.0 receiver has you covered. Whether you want to wirelessly stream your favorite music from your smartphone or play directly from a USB drive or SD card, the options are diverse. The Bluetooth True Wireless Stereo (TWS) function also lets you create a seamless stereo image without cable clutter.
The comprehensive connectivity options give you the freedom to connect various audio sources. With combined XLR/jack sockets for CH2 and CH3, you can easily connect microphones and instruments. The versatile CH1 input opens up a world of USB, Bluetooth, and AUX connectivity. Additionally, there's a LINK OUT output available for expanding the system for larger setups.
Noteworthy is the microphone effect function, which adds natural reverb, enhancing your vocals or speech. The Talkover function automatically reduces the music volume when you speak, and the master volume control gives you full control over the entire system.
For mobile use, everything has been considered: a trolley system allows for convenient transport, and the 35mm tripod mount ensures stable positioning. The battery status indicator keeps you informed about the remaining operating time, so you're never caught with a dead battery.
The system is also expandable with two slots for optional 8-channel UHF receivers, operating in the 500 or 800 MHz range and compatible with Audiophony's GO series. This means you can tailor your expansion to your specific needs.
With the Audiophony RACER 250, you get a mobile speaker system that leaves nothing to be desired.
Features of the Audiophony RACER 250
High-Quality Sound: Carefully calibrated 12-inch woofers and 1.35-inch tweeters for a premium audio experience.
Versatile Connectivity: Combined XLR/jack sockets for microphones and instruments, as well as dedicated inputs for USB, Bluetooth, and AUX.
Advanced Bluetooth Features: Latest Bluetooth 5.0 technology and True Wireless Stereo for wireless listening pleasure.
Pure Mobility: Integrated trolley system for easy transport and 35mm tripod mount for stable positioning.
Customizable Sound: 2-band EQ for individual sound control.
Microphone Reverb: Built-in microphone effect for immersive voice reproduction.
Talkover Function: Automatic volume reduction during speech for seamless transitions.
Master Control: Complete control of the audio system with the master volume control.
Battery Status Display: Always know how much operating time is left.
Expandable: Two optional slots for 8-channel UHF receivers, compatible with Audiophony's GO series.
Technical Specifications
Power Supply: 230V / 50Hz AC
Amplifier Power: 250 Wrms / 500 W peak, Class-D
Speakers: 12" + 1.35"
Maximum Sound Pressure Level (SPL): 123 dB
Frequency Response: 60 Hz - 20 kHz
Battery: 2 x 18V / 7 Ah
Battery Life: Approx. 6 hours
Battery Charging Time: Approx. 8 hours
Weight: 22.8 kg
Dimensions (W x D x H): 395 x 350 x 615 mm
€859.00* was €999.00* (14.01% saved)
Available at short notice
Audiophony Wallamp-Pack
The Audiophony Wallamp-Pack is the ideal solution for the permanent installation of an audio system in private households or in restaurants and presentation rooms. The set consists of a mini, flush-mounted amplifier with 2 x 30 watts, 2 loudspeakers and a remote control. The inputs include 2 x line mini jack, USB player, line inputs on the front and rear, EQ with 3 modes. The Class-D amplifier delivers a clean, distortion-free sound with a power of 50 watts or 100 watts peak. WALLAMP USB 2 line inputs (mini jack) USB player IR remote control (incl.) Front and rear line inputs EQ with 3 modes 2 x 30 Watt at 4 Ohm Power supply incl. (19V DC, 2,1A) Loudspeakers 50 Watt high-fidelity sound Elegant housing (in white) Durable ABS housing with steel grille Frequency range: 80 - 20,000 Hz "4" bass and 0.75" tweeter Mounting bracket incl. Weight: 1.8 kg (per speaker) Dimensions: 245 x 160 x 160 mm
€299.00*
Available immediately
%
Audiophony Atom12A
The ATOM12A is a professional active loudspeaker from Audiophony. The plastic speaker, with a power of 400W RMS, is ideal for mobile sound reinforcement or as an active monitor on stage. The bi-amping technology with separate amplifier for bass and tweeter and the adjustable DSP provides powerful performance with a balanced sound. Features Audiophony Atom12A Adjustable DSP Equipped with a 12" high performance bass and a 1.35" high frequency driver. 2 adjustable inputs (MIC/LINE via Combo XLR/jack and one LINE input via Cinch or Mini jack) Symmetrical LINE output Integrated M10 mounting points (top) Integrated 35 mm tripod mount with 2 positions (0° and 7.5°) Angles for monitor applications included sturdy handle Sturdy rubber feet Technical data 350W RMS Class D for LF 50W RMS Class AB for HF Total power: 1600W dynamic / 400W RMS Frequency range: 50 - 20,000 Hz Filter cut-off frequency: 2.8 KHz Sound pressure level: 123 dB max. Woofer: 12" / 4 Ohm / 350W AES Tweeter: 1.35" compression / 8 Ohm / 50 W RMS 2 fixing points M10 (top) Weight: 17.3 kg Dimensions: 628 x 365 x 355 mm
€449.00* was €569.00* (21.09% saved)
Expected to be available: 19 November 2024
%
The ATOM185A SUB is a professional active subwoofer from Audiophony. The subwoofer, with a power of 600W RMS, is ideal for mobile sound reinforcement and in combination with the ATOM12 or ATOM15. The built-in Class D amplifier and adjustable DSP provide a powerful sound. Features Audiophony Atom18A SUB Adjustable DSP Equipped with an 18" high power bass Integrated 35 mm tripod mount for spacer rod Robust housing made of 15mm plywood and sturdy front grille 2 side recessed handles Sturdy rubber feet Protection against short circuits, temperature and incl. limiter Technical data Amplifier: Class D / 2000W dynamic / 600W RMS Frequency range: 35 Hz - 150 Hz Power supply: SMPS switching power supply unit Sound pressure SPL: 127 dB max. woofer: 18 inch / 4 inch coil / 8 Ohm Inputs: 2 inputs on COMBO XLR/jack 6.35 Output: 2 line outputs to XLR Weight: 38 kg Dimensions: 662 x 510 x 615 mm
€999.00* was €1,199.00* (16.68% saved)
Expected to be available: 19 November 2024
%
Audiophony Prezone642
The PREZONE642 mixer/preamplifier is designed for professional installation and offers 6 mono microphone/line inputs on XLR or jack and 4 stereo inputs on RCA or jack. Each input can be sent independently to either zone or to both zones simultaneously for maximum flexibility. Each zone is equipped with a filtered and volume-adjustable SUB output and an insert input for the use of an additional external effect. The mixer is equipped with a pre-listening area with headphone output that allows control of each zone. Features Audiophony Prezone642 6 balanced mic/line inputs (XLR or jack) Phantom Power and Talkover on Channel 1 & 2 4 stereo inputs (RCA or jack) Link Out (Phoenix terminal) Priority input (jack) for e.g. emergency announcements 2 Zone Outputs (XLR) with Bass Output (Jack) & Insert Jack (Jack) Trim/Gain for each channel Peak and signal display for each channel 3-band EQ for channel 1 6 Zone assignment for each channel PFL function for each channel and both zones 2-band EQ for both zones LED-VU meter for both zones Bass volume control for both zones Headphone connector for PFL (each channel and both zones) Technical data Power supply: 230 V 50/60 Hz Power consumption: 16 Watt DC24 V emergency power supply with Link Out Frequency range: 20 Hz - 20 kHz (+/3dB) T.H.D. (1 kHz rated power) : < 0.2%. Equalizer High: +/-12 dB @ 12.5 kHz Equalizer Mid: +/-12 dB at 2.5 kHz Equalizer Low +/12 dB @ 80 Hz Rack: 19 inch, 2 U Weight: 5 kg Dimensions: 295 x 085 x 482 mm
€409.00* was €569.00* (28.12% saved)
Expected to be available: 19 November 2024
%
Audiophony Atom15A SUB
The ATOM15A SUB is a professional active subwoofer from Audiophony. The subwoofer, with a power of 600W RMS, is ideal for mobile sound reinforcement and in combination with the ATOM10 or ATOM12. The built-in Class D amplifier and the adjustable DSP provide a powerful sound. Featuers Audiophony Atom15A SUB Adjustable DSP Equipped with a 15" high power bass 2 x Combo XLR/jack inputs 2 x XLR outputs Integrated 35 mm tripod mount for spacer rod Robust housing made of 15mm plywood and sturdy front grille 2 side recessed handles Sturdy rubber feet Technical data Versatärker: Class D / 2000W dynamic / 600W RMS Frequency range: 45Hz 160Hz Power supply: SMPS Sound pressure level: 126 dB max. Woofer: 15". / 4" coil / 8 Ohm Input: 2 x COMBO 6.35 XLR Output: 2 XLR line outputs Weight: 30,5 kg Dimensions: 612 x 430 x 595 mm
€899.00* was €1,099.00* (18.2% saved)
Available immediately
Audiophony Pack GO-Head-F8
UHF radio microphone set incl. pocket transmitter and headset microphone in the frequency range 823-832/863-865MHz. Features JB Systems Pack GO-Head-F8 Diversity reception for greater stability and to avoid signal dropouts Adjustable "squelch" for consistently good reception without unwanted noise. Audio squelch for improved reliability. 16 frequencies selectable via PLL synthesizer: up to 4 sets can be used simultaneously Balanced XLR and unbalanced jack output Frequency range: 823-832/863-865MHz (toll-free use in most European countries) Up to 70m range. Pocket transmitter with mini-XLR connector Sturdy headset with mini-XLR connector Technical data receiver Carrier frequency: UHF 823-832 MHz / 863-865 MHz and 514-542 MHz Frequency response: 80 Hz to 16 kHz Distortion: less than 1% (at 1 kHz) Frequency settings: via channel selector Power supply: 12 V DC Audio output: balanced and unbalanced Power consumption: max. 130 mA Dimensions (W x H x D): 170 x 32 x 106 mm Technical data transmitter Frequency range: UHF 823-832 MHz / 863-865 MHz and 514-542 MHz Distortion factor: < 1 % (at 1 kHz) Batteries: 3 V DC (2 x 1.5 V AA batteries) or 2.4 V DC (2 x 1.2 V AA rechargeable batteries) Tone key: 32.768 kHz Frequency settings: via channel selector Power consumption: 120 mA ±10 mA Dimensions: 65 x 100 x 27 mm Technical data microphone Type: condenser microphone capsule Impedance: 2.2 kOhm Orientation: Cardioid unidirectional Frequency response: 100 Hz - 16,000 Hz Maximum operating voltage: 10 V Normal voltage range: 1.5 V Power consumption: max. 0.5 mA Signal to noise ratio: higher than 60 dB Included accessories: windscreen Scope of delivery GO-Mono receiver GO-Body transmitter GO-Head microphone
€259.00*
Available immediately
Audiophony GOHead
The GOHead from Audiophony is a lightweight and stable headset microphone, equipped with a high-sensitivity condenser microphone. Ideal for aerobics instructors in fitness studios, musicians, teachers, etc. The headset microphone is connected via a mini-XLR connector. Features Audiophony GOHead The unidirectional polar pattern of the microphone isolates unwanted background noise and prevents early feedback. Mini-XLR connector Excellent for use with Audiophony GO-BODY bodypack transmitters (not included) Compatible with all pocket transmitters with mini-XLR connector (also consider other brand pinout!) Technical data Type: condenser microphone capsule Impedance: 2.2 kOhm Orientation: Cardioid unidirectional Frequency response: 100 Hz - 16,000 Hz Maximum operating voltage: 10 V Normal voltage range: 1.5 V Power consumption: max. 0.5 mA Signal to noise ratio: higher than 60 dB Included accessories: windscreen
€49.00*
Available immediately
Audiophony Pack GO-Lava-F8
UHF radio microphone set incl. pocket transmitter and lavalier microphone in the frequency range 823-832/863-865MHz. Features Audiophony Pack GO-Lava-F8 Diversity reception for greater stability and to avoid signal dropouts Adjustable "squelch" for consistently good reception without unwanted noise. Audio squelch for improved reliability. 16 frequencies selectable via PLL synthesizer: up to 4 sets can be used simultaneously Balanced XLR and unbalanced jack output Frequency range: 823-832/863-865MHz (toll-free use in most European countries) Up to 70m range. Pocket transmitter with mini-XLR connector Lavalier microphone with mini-XLR connector and mounting clip Data GoMono-F8 receiver 16 UHF frequenciess Frequency range : UHF 823~832 and 863 ~ 865 MHz (4G compatible) The Diversity system ensures a perfect reception Adjustable Squelch to absorb interferences You can use up to 4 receivers at the same time (4 mic) Adjustable antennas (front) Average range in perfect conditions: 70m Balanced XLR outputs and unbalanced Jack output Dimensions: 130 x 36 x 92 mm Data GOBody-F8 emitter Must be combined with a tie-clip or headband GO series microphone and a GO-MONO receiver High-quality electret microphone THD : <1% at 1kHz Mini XLR input 2 impedance modes: line or micro Operates with 2x1.5V type AA batteries Dimensions : 237 x 58 mm Data Lavalier microphone: GOLava Tie-clip microphone Must be combined with a GO-BODY transmitter and a GO-MONO receiver Mini XLR connector Supplied with a microphone windshield and a tie clip Unidirectional electret Frequency response : 100 Hz at 16 kHz S/N : > 60 dB
€249.00*
Expected to be available: 19 November 2024
%
Audiophony MPX16
With the Audiophony MPX16, you get an well equipped mixing console for live performances, events or for home recording. It convinces with its upscale equipment at a fair price/performance ratio. A total of 16 channels are available. With a variety of input/output options, medium-sized and even more extensive setups can be realized quickly. Twelve line/microphone inputs feature a compressor, an 80 Hz HPF filter, and +48 volt phantom power. The highlight is certainly the integrated media player, which can play back audio files via USB, SD card and even Bluetooth. Each channel has an FX control with 16 programmable DSP multi-effects. Features Audiophony MPX16 16-channel mixer with effects and media player For more extensive setups and performances 12 microphone inputs via XLR jacks 3-band EQ for channel 1-12 Compressor for channel 1-12 80Hz HPF filter for channel 1-12 USB/SD/Bluetooth player 48V phantom power for the microphone channels 16 programmable DSP multi-effects Master output with LED level meter Technical specifications Multi-effects : 24-bit A/D converter, 16 programs Power supply : AC100~240V 50/60 Hz Frequency response: 10 - 55,000 Hz (line) S/N Ratio: 115 dB THD : approx. 0.005 % (Line) Weight : 6,9 kg Dimensions (W x D x H): 530 x 365 x 100 mm
€615.00* was €699.00* (12.02% saved)
Expected to be available: 19 November 2024
%
Audiophony MPU130BT MKII
The Audiophony MPU130BT MKII is a true multimedia hub that is ideal for automatically providing continuous sound reinforcement in bars, restaurants, doctor's offices or similar venues, regardless of the source. It is very easy to connect with one output. It can be operated either with the included remote control or directly from its front panel. Through the USB and SD ports, you'll have access to hundreds of hours of music that can be played non-stop, scheduled, or in random order. Additionally, music can be streamed from mobile devices via Bluetooth. If you don't want to use your own sources, you can also use the internal FM tuner for radio reception. Features Audiophony MPU130BT MKII CD player (anti-shock memory) Bluetooth 2.1 USB/MP3 player (front input for max. 16 GB, FAT32) SD and SDHC reader (max. 16 GB) AM/FM radio with station search and 10 presets Programmable or random playback Delivery includes IR remote control Autoplay function with switch on the back Output volume adjustment RCA output Technical data Power supply: AC 230 V - 50 Hz or DC 13.2 V Power consumption: 45W Format: 19 inch | 1 U Weight: 3.4 kg Dimensions (W x D x H): 482 x 275 x 44 mm
€379.00* was €539.00* (29.68% saved)
Available at short notice
%
Audiophony MPX8
With the Audiophony MPX8, you get an well equipped mixing console for live performances, events or for home recording. It convinces with its upscale equipment at a fair price/performance ratio. A total of 8 channels are available. With a variety of input/output options, small and medium-sized setups can be quickly realized. Four line/microphone inputs have a compressor, an 80 Hz HPF filter, and +48 volt phantom power. The highlight is certainly the integrated media player, which can play back audio files via USB, SD card and even Bluetooth. Each channel has an FX control with 16 programmable DSP multi-effects. Features Audiophony MPX8 8-channel mixer with effects and media player 4 microphone inputs via XLR jacks 2 stereo channels 3-band EQ for channel 1-4 Compressor for channel 1-4 80Hz HPF filter for channel 1-4 USB/SD/Bluetooth player 48V phantom power for the microphone channels 16 programmable DSP multi-effects Master output with LED level meter Technical specifications Multi-effects: 24-bit A/D converter, 16 programs Power supply : AC100~240V 50/60 Hz Frequency response: 10 - 55,000 Hz (line) S/N Ratio: 115 dB THD : ca 0,005 % (Line) Weight : 4 kg Dimensions (W x D x H) : 280 x 330 x 92 mm
€294.00* was €359.00* (18.11% saved)
Available immediately
%
Audiophony CR25A Combo-F5
Features Audiophony CR25A Combo-F5 Portable sound system with battery, Bluetooth and 500MHz HF system Class-D amplifier with 250W RMS Built-in USB key / SD card reader and Bluetooth® receiver 2 cardioid-dynamic microphones included LED display to indicate the charge level. Charge it and use it at the same time Low and treble equalizer from -12dB to + 12dB Echo and Delay effects on the microphone channels Battery charge, Power and Limit indicators Automatic shutdown if the battery level is too low Polypropylene housing, metal mesh grill C36 mounting plate for speaker stands Supplied with an infrared remote control Technical Data Loudspeaker: 12" loudspeaker + 1.35" titanium driver, total impedance: 4 Ohms Response curve: 55 - 20.000 Hz Sound pressure level: 118 dB SPL max Frequency range: UHF 514 ~ 542 Mhz - 10 mW Batteries: 2x 18V / 7Ah Lead Acid Autonomy: 6 hours depending on the volume Charging time: 8 hours to recharge the two 18V batteries Inputs: 2 channels XLR/TRS combo Line/Mic input - 1 Stereo RCA channel - 1 1/8" AUX channel - 1 Bluetooth connexion - 2 UHF microphones Outputs: 1 TRS mix output Weight: 24.5 kg Dimensions (L x W x H): 350 x 395 x 615 mm
€1,179.00* was €1,329.00* (11.29% saved)
Available immediately