Set filter:
Filter
–
Products from: Crown
%
Crown XLS-1502
The next generation of the XLS series received a new face with a sleek new look, an LCD display that is three times larger, and more DSP power with higher capabilities. Like its predecessor, the new XLS with Crown's patented DriveCore technology is highly efficient and can bridge 2400W at 4? with tons of headroom, ensuring a clean, undistorted signal directly to your speakers. The XLS DriveCore 2 guarantees that you'll be heard while delivering a powerful, pure sound experience for any venue. Features Crown XLS-1502 DriveCore Amplifier with Class-D Power 2x 775 Watt/2 Ohms 2x 525 Watt/4 Ohms 2x 300 Watt/8 Ohms bridge 1x 1550 Watt/4 Ohms or 1x 1050 Watt/8 Ohms 24 dB Linkwitz-Riley Crossover Sensitivity 1,4 or 0,775 Volt 2-Channel Stereo Mono bridge or Y-Modus Black-Out Mode switches off the display Lock-Out Mode Remote-Power control PeakX Limiter temperature controlled fan Metal housing 5 Status-LEDs per channel XLR-, 1/4" jack and RCA Inputs 2x Speakon and Binding Post Outputs 19" 2U depth 19,6 cm weight 3,9 kg
€479.00* was €627.00* (23.6% saved)
Available immediately
%
Crown XTI-4002
The XTi-4002 Amplifier delivers a hight industrial safety at maximum power and the best sound quality. In addition the wearing comfort is supported by the ergonomic formed grips and minimal weight which is partly caused by the slightly and robust aluminium face. Thereto offers the high-contrast LCD-Display including function Grops and half tone control dial a quick and intuitive handling. Hence the Amplifier is ideal for bands, musician and PA-conferrer. The external loudspeaker-controler is bypassed through a powerful digital signal processor. It offers an extensive allocative- and controlfunction. Hereby all important functions to the sound optimization will be assumed, for example frequency expansion, delay, equalizer as well as limiter for loudspeaker safety. The program „HiQnet System Architect“is needed for easy configuration as soon as control and inspection. This software is free it allows the access to all relevant parameter. Features Crown XTI-4002 DSP controlled Power: 2x 1600 W (2 Ohm), 1200 W (4 Ohm), 650 W (8 Ohm), 2400 W Bridge 8 Ohm, 3200 Watt Bridge 4 Ohm DSP applications: Input EQ with 6 parametric filters per channel with adjustable Q-factor and +/- 15 dB gain Crossover with high and low pass Per channel with 6/12/18/24 dB per octave and switchable polarity Output EQ with 8 parametric filters per channel with adjustable Q-factor and +/- 15 dB gain Delay up to 50 ms Subharmonic Synth Peak Plus Limiter with adjustable Threshold, Attack and Release 50 Presets 3-step switchable ventilation HiQnet Band Manager and System Architect software control via USB port Display of mains voltage and power supply unit temperature Connectors: 2x NL 4 Speaker Twist output, Binding Post out, XLR in/out Dimensions: 19 "(485 mm) x 2 U (89 mm) x 311 mm Weight 8,4 Kg
€1,099.00* was €1,499.00* (26.68% saved)
Available at short notice
%
Crown XTI-1002
The XTi- 1002 amplifier delivers high operational reliability with maximum performance and the best sound quality. In addition, the carrying comfort is supported by minimal weight, which is partly due to the light but robust aluminium front and the ergonomically shaped carrying handles. In addition, the high-contrast LCD display with function keys and louvre knobs offers fast and intuitive operation. This makes the amplifier ideal for bands, musicians and PA distributors. The external speaker controller in this model is bypassed by a powerful digital signal processor, which provides extensive control and monitoring functionality. This takes over all important functions for sound optimization, e. g. for crossover, delay, equalizer and limiter protection of the loudspeakers. The "HiQnet System Architect" program is required for convenient configuration, control and monitoring. This software is available free of charge and allows access to all relevant parameters. Features Crown XTI-1002 DSP controlled 2x 700 W (2 Ohm) 2x 500 W (4 Ohm) 2x 275 W (8 Ohm) 1x 1000 W Bridge (8 Ohm) 1x 1400 W Bridge (4 Ohm) Input EQ with 6 parametric filters per channel with adjustable Q-factor and +/- 15 dB gain Crossover with high and low pass per channel with 6/12/18/24 dB per octave and switchable polarity Output EQ with 8 parametric filters per channel with adjustable Q-factor and +/- 15 dB gain Delay up to 50 ms Subharmonic Synth Peak Plus Limiter with adjustable Threshold, Attack and Release 50 Presets Ventilation switchable in 3 steps HiQnet Band Manager and System Architect software control via USB port Display of mains voltage and power supply unit temperature Connectors: 2x NL 4 Speaker Twist output, Binding Post out, XLR in/out Dimensions: 19 "(485 mm) x 2 U (89 mm) x 311 mm Weight 8.4 kg
€569.00* was €712.00* (20.08% saved)
Available at short notice
%
Crown XTI-6002
The XTi-6002 Amplifier delivers a hight industrial safety at maximum power and the best sound quality. In addition the wearing comfort is supported by the ergonomic formed grips and minimal weight which is partly caused by the slightly and robust aluminium face. Thereto offers the high-contrast LCD-Display including function Grops and half tone control dial a quick and intuitive handling. Hence the Amplifier is ideal for bands, musician and PA-conferrer. The external loudspeaker-controler is bypassed through a powerful digital signal processor. It offers an extensive allocative- and controlfunction. Hereby all important functions to the sound optimization will be assumed, for example frequency expansion, delay, equalizer as well as limiter for loudspeaker safety. The program „HiQnet System Architect“is needed for easy configuration as soon as control and inspection. This software is free it allows the access to all relevant parameter. Features Crown XTI-6002 DSP-controlled Power: 2x 3000 W (2 Ohm), 2100 W (4 Ohm), 1200 W (8 Ohm), 4200 W Bridge 8 Ohm, 6000 Watt Bridge 4 Ohm DSP applications: Input EQ with 6 parametric filters per channel with adjustable Q-factor and +/- 15 dB gain Crossover with high and low pass per channel with 6/12/18/24 dB per octave and switchable polarity Output EQ with 8 parametric filters per channel with adjustable Q-factor and +/- 15 dB gain Delay up to 50 ms Subharmonic Synth Peak Plus Limiter with adjustable Threshold, Attack and Release 50 Presets 3-step switchable ventilation HiQnet Band Manager and System Architect software control via USB port Display of mains voltage and power supply unit temperature Connectors: 2x NL 4 Speaker Twist output, Binding Post out, XLR in/out Size: 19" / 2 U Installation depth: 420 mm Weight: 10.9 kg
€2,198.00* was €2,799.00* (21.47% saved)
Available at short notice
%
Crown XTI-2002
The XTi- 2002 amplifier delivers high operational reliability with maximum performance and the best sound quality. In addition, the carrying comfort is supported by minimal weight, which is partly due to the light but robust aluminium front and the ergonomically shaped carrying handles. In addition, the high-contrast LCD display with function keys and louvre knobs offers fast and intuitive operation. This makes the amplifier ideal for bands, musicians and PA distributors. The external speaker controller in this model is bypassed by a powerful digital signal processor, which provides extensive control and monitoring functionality. This takes over all important functions for sound optimization, e. g. for crossover, delay, equalizer and limiter protection of the loudspeakers. The "HiQnet System Architect" program is required for convenient configuration, control and monitoring. This software is available free of charge and allows access to all relevant parameters. Features Crown XTI-2002 controlled power: 2x 1000 W (2 Ohm), 800 W (4 Ohm), 475 W (8 Ohm), 1600 W Bridge 8 Ohm, 2000 Watt Bridge 4 Ohm DSP applications: Input EQ with 6 parametric filters per channel with adjustable Q-factor and +/- 15 dB gain Crossover with high and low pass per channel with 6/12/18/24 dB per octave and switchable polarity Output EQ with 8 parametric filters per channel with adjustable Q-factor and +/- 15 dB gain Delay up to 50 ms Subharmonic Synth Peak Plus Limiter with adjustable Threshold, Attack and Release 50 Presets 3-step switchable ventilation HiQnet Band Manager and System Architect software control via USB port Display of mains voltage and power supply unit temperature Connectors: 2x NL 4 Speaker Twist output, Binding Post out, XLR in/out Dimensions: 19" (485 mm) x 2 U (89 mm) x 311 mm Weight 8.4 kg
€699.00* was €977.00* (28.45% saved)
Available at short notice