Products by: Antari

This hazer is aimed at everyone who values clear lighting design for events, shows, or permanent installations. Instead of filling the room with dense fog, this model from Antari produces a fine, transparent haze that makes light beams visible without impairing vision. Operation is quiet and continuous – ideal for situations where noise is undesirable. Thanks to integrated compressor technology, the machine works not only efficiently but also almost maintenance-free. The self-cleaning function protects the heating element from deposits, especially thanks to the enlarged fluid tube, which significantly reduces the risk of clogging. If no DMX signal is detected, the system automatically performs cleaning and then switches to standby mode – a sensible solution for continuous use in event operations. With a fluid consumption of only 3 ml per minute, a tank capacity of 1.3 litres allows for continuous operation of more than seven hours – even at full output capacity. The output volume, as well as the fan speed, can be regulated steplessly. This flexibility makes the device versatile, for example at dance events, galas, or on stages. Control is possible via DMX, in stand-alone mode, or via an optional wired remote control. An automatic heating function upon DMX signal ensures immediate readiness as soon as the device is triggered. The grey housing made of robust material and the low weight of only 8.8 kg also facilitate transport and installation, even at changing locations. Features Antari Z-350 Extremely efficient hazer with compressor technology for fine, dry haze Self-cleaning function when a DMX signal is absent, with subsequent switch to standby mode 1.3 litre tank allows for over seven hours of continuous operation with minimal fluid consumption Stepless adjustment of fan speed and fog volume directly on the device DMX interface for intelligent control incl. automatic activation upon DMX signal Suitable for operation with water-based fog fluid Ideal for displaying light and laser effects without obstructing visibility in the room Simple control via stand-alone mode, DMX, or optional wired remote control Compact design with low weight for mobile use Short warm-up time of only approx. four minutes Technical Data Power supply230 V AC, 50 Hz Total power consumption690 W IP ratingIP20 Protection classSK I Power connectionIEC connector (M) | Power cable with safety plug Warm-up timeApprox. 4 min Tank capacity1.3 l Fluid consumptionApprox. 3 ml/min DMX channels2 DMX input1 x 3-pin XLR (M) DMX output1 x 3-pin XLR (W) ControlWired remote control (optional) | Stand-alone | DMX Operating principleVaporiser fog machine Heating element800 W Weight8.80 kg Dimensions (W x D x H)320 x 150 x 390 mm Included in delivery Antari Z-350 hazer Power cable User manual

Compact dimensions, low weight and a surprisingly quiet operation – this is exactly what makes this bubble machine from ANTARI the ideal choice for versatile event applications. With its two rotating wheels, it creates a large quantity of shimmering bubbles in a short time, which are evenly distributed throughout the room by an integrated fan. Especially in noise-sensitive environments such as galas, theatre performances or wedding celebrations, the device scores with its whisper-quiet operation, which is barely perceptible. A major advantage: operation is very simple via an On/Off switch directly on the device, meaning no additional controller or remote control is necessary. This makes the machine particularly user-friendly – switch it on, fill with fluid and the effect begins. The tank holds 0.7 litres of bubble fluid, which ensures several minutes of continuous operation with extremely economical consumption. The device is also flexible when it comes to mounting. It can be used either standing or hanging with the help of the included bracket. These two application options – stationary or suspended – open up creative freedom for setup on stages, in party rooms or at mobile events. The Antari B-100 does without any unnecessary frills and concentrates on the essentials: reliable and effective bubble production, easy to operate and without high maintenance requirements. Also particularly practical is the easy refilling of the fluid, which succeeds quickly and cleanly due to the good accessibility of the tank. Features Antari B-100 Handy bubble machine with two rotating wheels for creating large quantities of shimmering bubbles An integrated fan distributes the bubbles evenly in the room Simple handling via On/Off switch directly on the device Very quiet operation, ideal for noise-sensitive environments With mounting bracket for suspended or standing use Low fluid consumption for long operation with little refilling More affordable version without remote control or control module Fast refilling via easily accessible tank Suitable for events, weddings, theatre and mobile DJs Technical specifications Power supply230 V AC, 50 Hz Total power consumption28 W Power connectionFixed power cable with earthing contact plug Tank capacity0.7 l bubble fluid Fluid consumptionApprox. 8.3 ml/min ControlOn/Off switch on the device Mounting systemMounting bracket Weight4.50 kg Dimensions (W x D x H)170 x 341 x 172 mm Included in delivery Antari B-100 bubble machine User manual Mounting bracket 2 x knurled screw 2 x washer Container

Keep precise control over your fog output – this practical wired remote control, designed specifically for selected models from the manufacturer Antari, makes it possible. Compatible with devices such as Z-1200II, LCU-1 and ICE-101, the controller enables sophisticated and reliable management of your fog performance. Whether you need targeted bursts or continuous fog, you decide how the effect should look on stage or at your event. Operation is handled via a permanently connected cable with a length of 8 metres, providing plenty of room to control the device from a safe distance and a relaxed position. The connection uses a 4-pin XLR plug, which ensures stability and security. A special highlight is the integrated timer, which allows you to individually adjust the interval, output duration and fog volume – all without the need for complex programming. In addition to the timer function, the remote control also offers the option to trigger the fog manually or switch to continuous fog, if you require a steady and constant output. The individual control options are clearly labelled and can be selected intuitively directly on the device. This makes operation trouble-free, even in hectic situations. Thanks to its compact design and robust housing, the wired remote control is suitable not only for fixed installations but also for mobile use. If you want to use your Antari fog machine efficiently and flexibly, this accessory is the perfect addition for reliable operation. Features Antari Z-8 Timer-Controller Wired remote control with timer function for Antari fog machines, suitable for Z-1200II, LCU-1 and ICE-101 Timer function with adjustable interval, output duration and fog volume Option for continuous fog with constant output without interruption Manual control of fog output possible at any time Robust connection via 4-pin XLR plug Long 8-metre cable for flexible placement Technical Data Compatible Antari modelsAntari Z-1200II | Antari LCU-1 | Antari ICE-101 Cable length8 m Connector type4-pin XLR (M) Weight0.60 kg Scope of delivery Antari Z-8 Timer-Controller wired remote control

With a dense, low-lying fog, the ICE-101 creates an impressive atmosphere without the need for dry ice. Instead, standard crushed ice, which fits into the generous ice chamber, is sufficient. Up to 10 kg of ice ensure a long-lasting effect – up to eight hours of cooling time and one hour of continuous operation are possible. This saves effort, avoids health risks associated with CO₂ smoke, and offers an environmentally friendly alternative for impressive fog effects. Inside, there is a powerful 1000-watt fog machine that efficiently transforms fluid into dense fog. This is cooled by the ice and spreads gently across the floor. The output range of approximately 6 metres ensures that even large stage areas or dance floors are evenly filled with fog. Thanks to the sturdy metal housing, the device is designed for regular use in a wide variety of environments – be it in the event sector, theatre productions, or for photo and video shoots. The Antari ICE-101 offers flexibility through multiple control options: in addition to the wired remote control, a DMX connection is also available. This means full control over the interval, duration, and intensity of the fog output. The integrated timer allows for precise programming that also permits spontaneous manual adjustments. The pump for water drainage can be operated either manually or automatically – making handling particularly convenient. Maintenance has also been considered. The tank for the fog fluid is removable, which simplifies cleaning and makes refilling easier. The machine is operated with standard water-based fluid, which makes its use straightforward and economical. With a short warm-up time of just 4.5 minutes, the machine is quickly ready for operation. Features Antari ICE-101 Independent low-fog machine with integrated ice chamber for 10 kg of ice cubes Creates low-lying fog through a combination of fog fluid and crushed ice Also suitable for operation with dry ice Continuous fog output via powerful 1000W fog unit Controlled via DMX or wired remote control Integrated pump for automatic or manual drainage of meltwater Adjustable timer for duration, interval, and fog volume Robust silver metal housing for long-lasting use Fog output range is around 6 metres Removable 2.5-litre tank for water-based fog fluid Short warm-up time of approximately 4.5 minutes Suitable for events, theatre, weddings, or photo and video shoots Technical specifications Power supply230 V AC, 50 Hz Power connectionIEC power input with earthed plug Total power consumption1050 W Protection classIP20 Warm-up timeApprox. 4.5 min Output rangeApprox. 6 m Tank capacity2.5 l Fluid consumptionApprox. 25 ml/min DMX channels1 DMX input1 x 3-pin XLR (M) DMX output1 x 3-pin XLR (F) ControlDMX | wired remote control Weight24.40 kg Dimensions (W x D x H)360 x 540 x 510 mm Included in delivery Antari ICE-101 low-fog machine Remote control Container Hose Filter User manual

Wireless control offers more flexibility in use – especially at events where quick reactions and reliable technology are required. With the Z-30PRO wireless module from Antari, you can control compatible fog machines like the Z-1500II or Z-3000II conveniently via radio. Instead of having to rely on a line of sight, you can operate the system wirelessly from up to 50 metres away. The included transmitter unit works optionally on two frequencies (315 MHz and 433 MHz), which prevents interference when using multiple systems in parallel. One remote control can also trigger multiple machines simultaneously – ideal for larger stage or event setups. The control module itself is equipped with a 5-pin XLR connector and can be positioned flexibly via a 2-metre supply cable. This allows for integration into existing systems without the need for laying additional cables. Both operation and setup are straightforward: The wireless connection is licence-free and registration-free throughout the EU, and power is supplied by a 12V alkaline-manganese battery, which can be replaced quickly if necessary. The compact format of the unit allows it to be used even where space is limited – such as in trusses, on mobile racks, or behind stages. Unlike the Z-20, this model offers advanced control options and a greater range. Sturdily built and equipped with reliable Antari wireless technology, this module is a useful accessory for anyone who wants to control their fog technology safely and flexibly from a distance. Features Antari Z-30PRO Wireless radio module for controlling the Z-1500II and Z-3000II fog machines Consists of a control module with 5-pin XLR connector and a separate transmitter unit Range of up to 50 metres allows for flexible positioning Two adjustable wireless frequencies (315 MHz and 433 MHz) for parallel operation One remote control can manage multiple machines simultaneously Power supply via 12V battery (included in delivery) Licence-free and registration-free throughout the entire EU Technical specifications Cable length2 m Connector type5-pin XLR (M) Carrier frequency433.920 MHz Range50 m Remote control battery1 x 12V LR27 alkaline-manganese installed Weight0.65 kg Dimensions (W x D x H)90 x 185 x 63 mm Included in delivery Antari Z-30PRO wireless module Transmitter unit 12V battery for remote control

Four rotating wheels ensure impressive performance with this bubble machine. They consistently generate a dense cloud of bubbles, which are dispersed throughout the room by three integrated fans. Even large stages or venues can be reliably filled with a steady, intense bubble output. The generous fluid tank ensures that you do not have to constantly refill – ideal for longer events without interruption. For professional use, the unit is equipped with a DMX interface. This allows you to seamlessly integrate it into existing lighting or show control systems. Alternatively, the machine can also be operated via an optionally available wireless remote control or the included wired remote control. An individually adjustable timer further provides you with full control over the interval, duration, and volume of the bubble production. Despite its impressive power, the unit operates surprisingly quietly. With noise classification 1, the machine is suitable even for noise-sensitive environments such as theatre performances or live shows. The build is robust, and the sturdy mounting bracket allows the unit to be used flexibly, both standing or suspended. Operation is straightforward: replenish fluid, connect, start – that is all it takes. All connections are professionally installed, including a 10-metre power cable. This gives you independence when positioning the unit. Whether permanently installed or used on the move, this machine is built for continuous operation under real-world conditions. Features Antari B-200 High-performance bubble machine with four rotating wheels for high output Three integrated fans for even and wide dispersion of bubbles Large fluid tank for long runtimes without refilling Adjustable timer with interval, duration, and volume control, as well as continuous operation DMX control for integration into show and lighting systems Optionally controllable via wireless remote or the included wired remote Mounting bracket for standing or suspended use Suitable for stage, theatre, and other professional application areas Very quiet operation – also suitable for noise-sensitive environments Technical specifications Power supply230 V AC, 50 Hz Total power consumption110 W Power connectionIEC (M) flush-mount version | Power cable with safety plug Cable length10 m Tank capacity1.5 l bubble fluid Fluid consumptionApprox. 50 ml/min DMX channels1 DMX input1 x 5-pin XLR (M) flush-mount version DMX output1 x 5-pin XLR (F) flush-mount version ControlDMX | Wireless remote (optional) | Wired remote Mounting systemMounting bracket Weight10.75 kg Dimensions (W x D x H)250 x 425 x 200 mm Included in delivery Antari B-200 bubble machine User manual Mains cable/power cable Mounting bracket 2 thumb screws 4 washers 2 screws Safety eyelet Remote control

Quiet, efficient and versatile – this bubble machine is impressive across the board. Two rotating wheels ensure uniform bubble production, while an integrated fan disperses them through the room with minimal noise. Thanks to continuous output, it creates a lasting visual highlight, which is particularly in demand for events requiring a high level of atmosphere. Whether used in theatre, at weddings or in sophisticated gastronomy, this model blends seamlessly into sound-sensitive environments. Operation is straightforward via a digital wireless remote control, which allows for the control of multiple units simultaneously. A single press of a button is enough to operate an unlimited number of machines in sync – ideal for larger stage setups or atmospheric room designs. The range of up to 50 metres offers you plenty of freedom regarding placement. Handling the fluid is also particularly practical. The tank is easy to fill, and the low fluid consumption ensures you achieve long operating times with one litre. This keeps maintenance requirements low – simply fill with fluid and you are ready to go. The included mounting bracket allows for both floor standing operation and suspended installation. Despite its compact dimensions, the device scores with its very quiet operation. Thanks to its classification in noise class 1, the model is ideal for environments where discretion is required. This makes it the perfect choice for quiet moments with an impressive effect. Features Antari W-101 Compact bubble machine with quiet operation for professional applications Two rotating wheels for uniform bubble production Integrated fan distributes bubbles effectively throughout the room Digital wireless control for simultaneous operation of multiple units Remote control range of up to 50 metres Easy handling through simple fluid refilling Very low fluid consumption for long operation with minimal effort Mounting bracket for floor standing and suspended installation Low power consumption for efficient operation Ideal for events, theatre and sound-sensitive environments Technical specifications Power supply230 V AC, 50 Hz Total power output25 W Power connectionFixed power cable with safety plug Tank capacity1.0 l bubble fluid Fluid consumptionapprox. 8.3 ml/min ControlWireless remote control Carrier frequency433.920 MHz Mounting systemMounting bracket Remote control battery1 x 12 V LR27 alkaline-manganese Remote control rangeUp to 50 m Noise classificationClass 1 (very slight noise) Weight4.95 kg Dimensions (W x D x H)170 x 341 x 172 mm Included in delivery Antari W-101 bubble machine Remote control Mounting bracket 2 x thumb screw 2 x washer Container Battery User manual Declaration of conformity

The Antari HZ-100 Hazer is a compact hazer specifically designed to produce a fine, even haze. This haze is particularly translucent and enhances light effects without the formation of fog clouds. Ideal for stages, theatres and rental applications, the HZ-100 provides continuous haze output and is ready to use immediately as no warm-up time is required. The device features a quiet, maintenance-free compressor and is housed in a robust metal casing that ensures a long service life. The HZ-100 can be operated via various remote control options, including an optional wireless remote control and a wired remote control. A fluid level indicator reliably informs you about the consumption of the oil-based haze fluid. Due to its compact size and low weight, the hazer is easy to transport and versatile in its application. Whether used standing or integrated into an existing setup, the HZ-100 blends seamlessly into any production environment. Features Antari HZ-100 Hazer Compact design for easy handling and transport Generates fine, even haze for optimal display of light effects No warm-up time required, ready for use immediately Quiet, maintenance-free compressor for trouble-free operation Sturdy metal housing for increased durability Integrated fill level indicator for monitoring fluid consumption Control options via wired or wireless remote control Suitable for versatile applications such as stage and theatre Technical Data Power supply230 V AC, 50 Hz Power connectionIEC (m) built-in version, power cord with safety plug (included) Total power consumption375 W Protection classIP20 Warm-up time0 seconds Output volumeApprox. 30 m³/min Tank capacity2.5 L oil-based haze fluid, fixed built-in tank Fluid consumptionApprox. 2 ml/min ControlWireless remote control (optional); wired remote control (optional) Weight12.70 kg Dimensions (W x D x H)250 x 484 cm x 236 mm Scope of delivery Antari HZ-100 Hazer Power cable User manual

With the Z-3000 MK3, Antari presents a powerful and highly developed fog machine that sets new standards in terms of efficiency and reliability. This model was specially developed for professional applications and offers an impressive combination of durability, ease of use, and versatility. Thanks to improved technology, the machine delivers approximately 30% more fog output than its predecessor, allowing it to meet even the most demanding requirements. The fog machine is not only powerful but also flexible in its application. Whether on stage, in clubs, theatres, or for rental companies – the robust design and the versatile control options make it the ideal choice for almost any scenario. It can be operated both standing and flown, which further increases its adaptability. An LCD display ensures intuitive operation, while the adjustable timer with interval, duration, and fog volume settings allows for precise control. The sturdy metal housing and automatic temperature control guarantee reliable performance, even during intensive use. The large, removable tank, which is operated with water-based fog fluid, allows for longer operating times without constant interruptions for refilling. For added convenience, the machine can be operated via DMX, RDM, or optionally with a wireless remote control – perfect for seamless integration into existing setups. The high efficiency and well-thought-out features of this fog machine make it an indispensable tool for professional stage productions and events. Features Antari Z-3000 MK3 Powerful 2500-watt fog machine for professional applications Improved output performance: approx. 30% more fog volume compared to the predecessor Robust metal housing for high resilience and durability Auto-temperature control for constant performance and safety Flexible operation: usable in standing mode or mounted in flying position Intuitive control via LCD display for easy operation Adjustable timer: Customizable intervals, fog volume and duration Continuous fog mode and manual triggering for maximum versatility Compatible with DMX and RDM control systems for seamless integration Optionally expandable with a wireless remote control for more flexibility Removable large tank for easy handling and longer operating times Operation with environmentally friendly, water-based fog fluid Continuous fog output without interruptions Ideal for stages, clubs, theatres, and rental companies Technical Data Total power consumption2500 watts Power connectionPowerCON TRUE (M) chassis connector, power cable with safety plug Power supply230 V AC, 50 Hz IP ratingIP20 Noise classificationClass 3 (clearly perceptible noise) Warm-up timeApprox. 10 minutes Tank capacity6 litres, removable, suitable for water-based fog fluid Fluid consumptionApprox. 250 ml/min DMX channels1 DMX connectionsInput: 1 x 3-pin XLR (M), 1 x 5-pin XLR (M) Output: 1 x 3-pin XLR (W), 1 x 5-pin XLR (W) Input1 x 3-pin XLR (M), 1 x 5-pin XLR (M) Output1 x 3-pin XLR (W), 1 x 5-pin XLR (W) Control optionsDMX, stand-alone, wireless remote control (optional), RDM DisplayLCD display for intuitive operation Weight19.35 kg Dimensions (W x D x H)275 x 712 x 278 mm Included in delivery Antari Z-3000 MK3 fog machine Power cable/mains cable 1x container 1x filter User manual

Create precise fog and wind effects at the touch of a button, all without the hassle of cable connections – that is what this professional wireless controller set enables. The Antari WTR-20 establishes a stable connection to your effect devices and ensures that you can conveniently control your devices remotely from any point in the location. The set consists of a compact transmitter and a perfectly matched receiver. Thanks to the flexible switching between the carrier frequencies of 315 and 433 MHz, the transmission can be optimally adapted to local conditions. This allows you to cleverly avoid potential interference signals from other wireless systems and ensures smooth operation throughout your entire performance. This handy product is characterised by its extremely beneficial compatibility with a multitude of professional machines. Whether haze machines, conventional fog machines, or powerful wind machines: the seamless integration with popular models such as AF-4R, MB-20, FT-20, S-500, S-500L, Z-390 and M-11 guarantees enormous versatility in your everyday equipment fleet. Thanks to the extremely simple commissioning and the intuitive one-button operation on the handheld transmitter, the control system is ready for use immediately without the need to set up complicated protocols. The solid construction of all components also ensures that the module survives the typical strains of tough touring life without damage and reliably accompanies you in your creative stagings for years to come. Features Antari WTR-20 Practical wireless transmitter and receiver set for the wireless remote control of fog machines and fans Commissioning via freely selectable frequencies of 315 and 433 MHz for optimal connection stability Compatible with a multitude of models such as AF-4R, MB-20, FT-20, S-500, S-500L, Z-390 as well as M-11 Uncomplicated handling for quick and targeted adjustment of the effects Durable housing construction protects the sensitive electronics during touring operations Excellent for use in the studio, at live events, or on theatre stages Technical specifications Carrier frequency315 MHz | 433 MHz Remote control battery1 x 12 V LR27 alkaline-manganese battery Weight0.04 kg Included in delivery Antari WTR-20 wireless remote control set 1 x W-2 receiver 1 x W-2 remote control (transmitter) 1 x 12 V LR27 alkaline-manganese battery (already inserted) 1 x Declaration of conformity

With robust technology and well-conceived features, this powerful 1200-watt fog machine is the right choice for professional applications. Thanks to continuous output and automatic temperature control, it ensures uniform, dense clouds of fog – ideal for stages, clubs, theatres, or rental companies. This improved model also offers an approx. 10% higher output volume compared to its predecessor, making the effect even more impactful. The metal housing not only provides stability but is also equipped with a practical carrying handle, a swivelling hanging bracket, and a safety eyelet – for secure and flexible mounting, both standing and suspended. The removable 2.5-litre tank for water-based fluid significantly simplifies handling in daily operation. The tank level can be monitored at any time via the integrated level indicator. An LCD display and the ability to control it via DMX, RDM, or standalone operation offer maximum control. Optionally, the machine can also be operated with a wired or wireless remote control. For precise control, an adjustable timer, continuous fog options, and manual triggering are available. All parameters such as interval, duration, or fog volume can be set individually. The installed heating element works with Unicore technology and is designed for high durability. The warm-up time of approximately 10 minutes makes the machine ready for use quickly. Fluid consumption also remains efficient at around 85 ml/min. Due to the IP20 protection class, the device is designed for indoor use, with the noise level corresponding to Class 3 – clearly audible, but usually negligible in stage applications. Features Antari Z-1200X MK3 1200-watt fog machine with a stable metal housing and extensive control options Output volume increased by approx. 10% compared to the previous model LCD display for easy operation and monitoring Adjustable timer for interval, duration, and fog volume as well as manual triggering DMX, RDM, and standalone operation possible; wireless and wired remote control optional Continuous fog output with automatic temperature control Unicore heating element technology for constant performance Carrying handle, hanging bracket, and safety eyelet for flexible use Removable tank with a 2.5-litre capacity Operation with water-based fog fluid Technical Data Power supply230 V AC, 50 Hz Total power consumption1200 W Power connectionFixed power cable with earthing contact plug Heating element1050 W Protection classIP20 Warm-up timeapprox. 10 min Tank capacity2.5 l Fluid consumptionApprox. 85 ml/min DMX channels1 DMX input1 x 5-pin XLR (M) built-in version DMX output1 x 5-pin XLR (F) built-in version ControlDMX | RDM | Standalone | Wireless remote control (optional) | Wired remote control (optional) Display typeLCD display Noise classificationClass 3 Weight10.80 kg Dimensions (W x D x H)243 x 458 x 251 mm Included in delivery Antari Z-1200X MK3 fog machine Mains cable/power cable Mounting bracket 2 x screws 2 x knurled screws 4 x washers Container Tube Filter Operating manual