We recommend these alternative products for you
Gemini Loudspeaker GVX-10PWH
€379.00 Prices incl. VAT
Questions? Personal advice: +49 9951 - 690 190
Product description Gemini Loudspeaker GVX-10PWH
When speech intelligibility and even coverage are required, the interaction between the woofer, tweeter and horn is key. The Gemini GVX-10PWH is an active 2-way loudspeaker in a white finish: its 200-watt RMS bi-amp amplification powers the two frequency ranges separately and is suitable for speech reinforcement and acoustic performances.
A 10-inch woofer handles the low frequencies, while a 1.35-inch titanium tweeter takes care of the highs. The 80° x 60° horn with waveguide directs the sound around the room. The linear frequency response ranges from 70 Hz to 20 kHz; the internal electronic crossover operates at 1,800 Hz with a slope of 24 dB per octave.
You connect the signal via the XLR input, while the XLR thru output passes it on to additional equipment. A switch selects between full-range and monitor operation. In the monitor position, a 100-Hz low-cut filter reduces low frequencies when you use the loudspeaker as a stage monitor.
The trapezoidal cabinet can be set up as a floor monitor and mounted on a stand using the 35 mm flange. Rigging points are provided for flown installations; recessed handles make transport easier. A metal grille protects the front, and protective circuits safeguard operation against overheating, short circuits and DC voltage.
With its white finish, XLR connections and options for stand, monitor or flown use, this model suits mobile and permanently installed sound reinforcement setups that require an active 10-inch loudspeaker.
Features Gemini GVX-10PWH
Active 2-way PA loudspeaker for speech reinforcement, acoustic performances and stage monitoring
Bi-amp amplification with 200 watts RMS and 400 watts peak
10-inch woofer with 2-inch voice coil and 50 oz magnet
1.35-inch titanium tweeter with 80° x 60° horn and waveguide
Internal electronic crossover at 1,800 Hz with a slope of 24 dB/octave
Linear frequency response from 70 Hz to 20 kHz
XLR input and XLR thru output
Full-range/monitor switch with 100-Hz low-cut filter in monitor mode
Trapezoidal wedge-design cabinet for use as a stage monitor
35 mm flange for stand mounting and rigging points for flown installations
Recessed handles and metal front grille
Protective circuits against overheating, short circuits and DC voltage
Robust white cabinet
Technical data
Loudspeaker typeActive 2-way loudspeaker
Amplifier power RMS200 W total | 165 W low-frequency | 35 W high-frequency
Amplifier power peak400 W
Woofer size10 inches
Woofer voice coil2 inches
Woofer magnet50 oz (1.4 kg)
Tweeter1.35 inches, titanium
Horn dispersion80° x 60°
Crossover1,800 Hz | 24 dB/octave
Frequency response70 Hz–20 kHz
Impedance8 ohms
Connections1 x XLR input | 1 x XLR thru output
Weight18.5 kg
Dimensions (W x D x H)299.7 x 309.98 x 520.7 mm
Siemensstr. 10
94405 Landau a.d. Isar
Germany