We recommend these alternative products for you
Electro Voice Dynamic Microphone with Switch PL84S
€125.00 Prices incl. VAT
Questions? Personal advice: +49 9951 - 690 190
Product description Electro Voice Dynamic Microphone with Switch PL84S
A switch located directly on the microphone is practical for performances when you want to mute your signal between sets. The Electro Voice PL84S with on/off switch is a cardioid condenser vocal microphone for singing and speech; it can also be used to mic acoustic instruments.
The condenser capsule is designed to reproduce vocals in detail, with warm lows, a pronounced midrange and smooth highs. Its shock-mounted design reduces handling and grip noise. The virtually silent, lockable switch electrically mutes the microphone signal directly at the device.
As with directional microphones, the bass response changes with the distance from the sound source: at less than about 15 cm, the proximity effect increases. This can add depth to a voice that sounds thin. Close-miking can also reduce the tendency to feed back; the higher output level allows you to reduce the gain at the mixer accordingly.
The microphone requires an external 11 to 52 V phantom power supply, as provided by many mixers and microphone inputs. The three-pin XLR connection carries the signal to the preamp. A fine-mesh Memraflex grille and satin-black housing are part of this model's design.
The PL84S is suitable for vocal and speech recording as well as miking acoustic instruments when you need a cardioid condenser microphone with an integrated mute switch. Phantom power and an XLR input are the key requirements for use with your existing setup.
Features Electro Voice PL84S
Condenser handheld microphone for vocals, speech and acoustic instruments
Cardioid polar pattern
Detailed vocal reproduction with warm lows, musical mids and smooth highs
Virtually silent, lockable on/off switch with electrical muting at the microphone
Shock-mounted capsule to reduce handling noise
Fine-mesh Memraflex microphone grille
Proximity effect can be used to adjust the bass response
Three-pin XLR output
Requires external phantom power
Technical specifications
Transducerself-biased condenser
Polar patternCardioid
Frequency range50 Hz – 20,000 Hz
Sensitivity at 1 kHz3.5 mV/Pa (-49 dBV)
Impedance200 ohms
Self-noise26 dB SPL, A-weighted
Signal-to-noise ratio68 dB at 94 dB SPL
Dynamic range115 dB
Maximum sound pressure level141 dB SPL at 1% THD and 1 kHz
Power supply11–52 V DC phantom power, 1.9 mA
Connection3-pin XLR plug
SwitchOn/off, lockable
Colour and finishsatin black
Weight0.261 kg
DimensionsLength 182 x shaft diameter 23.6 mm, grille diameter 49 mm
Package contents
Electro Voice PL84S condenser vocal microphone
Microphone holder with Euro thread insert
Soft zip-up microphone pouch