Dynacord SUB 112

The Dynacord SUB 112 contains a passive filter, 6 dB/oct., that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORD’s D 8 can therefore be directly connected in parallel to the SUB 112 if an extended bass reproduction is required. You just have to connect the SUB 112 and the D 8 with a regular Speakon cable in parallel. The SUB 112 cabinet is made of 15mm birch plywood. All corner joints and braces are grooved and glued. The cabinet´s surface is painted with a 2-K laquer finish . The acoustic foam front on a powder coated steel grille protects the DND12S400 woofer against damage during transport and bad environmental conditions. The connector panel uses two 4-pole Speakon connectors (INPUT/THRU) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the two Speakon connectors. A pole-mount flange allows easy speaker-on-a-stick applications. Please always take care that every speaker stack has been mechanically secured against accidental falling down. Please always consult a certified structural engineer for correct and safe setup methods.

Features

1x12''250Watt40-130HzClassDfrequency-separating filter 122dB SPL maxmobilColour: black

Technical Data

Sub Transducer: EVS 12 SBRated Power RMS: 250 W / 4 ohmsPeak Power IHF-A: 400 W / 4 ohmsFrequency Range (-10 dB): 40 Hz - 130 Hzmax. SPL / 1m: 122 dBDimensions: 445 x 380 x 445 mmWeight: 20 kg