Eurolite LED KLS-190

A KLS with COB LEDs that convinces with its classic appearance and its powerful and homogeneous light: With the KLS-190, Eurolite now offers exactly such a spotlight bar.

4 spots with 30 watts each and RGB color mixing are used. The wide beam angle can be limited from 42° to narrow 9° by using a lens included in delivery. The mounting of the lens is very simple and can be done in seconds. In addition, 4 cold white LEDs are installed in the bar, which can be used for stroboscope effects.

The compact light set is controlled via DMX. For operation via wireless DMX, the KLS-190 offers a USB socket into which a Quick DMX receiver can be plugged. But even without external control, 19 well thought-out stand-alone and audio programs each provide a variety of effects. The strobe LEDs can be switched on if desired in addition to the programs.

The special mounting system of the KLS-190 not only allows the bar to be mounted on a stand, it also allows the stand rod to be pushed through to attach a spotlight or loudspeaker box on top. Up to 4 additional spotlights or effects can also be mounted on the KLS-190 itself. The power supply for these devices can be provided via the cold device output of the bar. A transport bag is included.

Features Eurolite LED KLS-190

• Crossbar with integrated DMX control unit and stand sleeve
• Ultra-light, ideally suited for mobile use
• Suited for installation on a speaker stand (not included) or truss
• Comes pre-assembled with practical transport bag
• One high-power 3in1 LED per spot provides for an exquisite RGB color mix
• Strobe effect with 4 cold white 3 W LEDs
• 2 diffuser cover kits (9° and 42°) for a softer light with varying beam angles included in delivery
• Movable and tiltable spotlights
• Via DMX, each spot can be individually controlled
• Auto, music, master/slave and DMX mode
• 19 professionally designed integrated show programs in auto and music mode
• Direct color selection for 18 preset colors
• Stepless color blend, color change, color fade, dimmer and strobe effect
• Sound-control via built-in microphone, microphone sensitivity adjustable
• Supports QuickDMX - the wireless DMX system from Eurolite
• Built-in phantom-powered USB port for QuickDMX receivers (accessories)
• DMX512 control via any commercial DMX controller
• 4, 6, 7, 9, 13 or 16 DMX channels selectable
• Flicker-free projection
• Addressing and setting via control panel with 4-digit LED display
• Additional controlling possibility via the EUROLITE IR-7 remote control, included in delivery
• Black lacquered metal version with movable mounting bracket
• Convection cooling entirely via cooling ribs, no fans, particularly quiet during operation
• Feed-through output allows to power up to 8 devices
• Ready for connection via IEC power cord with safety plug
• LED: 4 x 30 W RGB
• LED: 4 x high-power 3 W CW
• Control: QuickDMX viaUSB (optional); DMX; Sound to light viaMicrophone; IR remote control included
• Effect: Strobe effect

Technical data

• DMX512 connector: 3-pin XLR
• QuickDMX connector: USB, Type A
• Power supply: 110-240 V AC, 50/60 Hz
• Total connected load: 60 W
• LED: 4 x 30 W RGB, 4 x high-power 3 W CW
• DMX channels: 4; 6; 7; 9; 13; 16
• Protection class: IP20
• Fan: Without, convection cooled
• Control: QuickDMX via USB (optional), DMX, music control via microphone, IR remote control (included)
• Beam angle: 9°, 42
• Weight: 6,50 kg
• Dimensions (L x W x H): 660 x 105 x 265 mm