Eurolite LED D-2000

The LED D-2000 Beam Effect by Eurolite comes equipped with 5 high-performance 10-watt LEDs in the colors red, green, blue, amber and white creating dynamic strobe and derby effects. 

The LED D-2000 works with 3 preset programs. In the automatic mode, the preset light programs are played fully automatically without any further adjustments on your part. Alternatively, you can choose the sound-controlled mode via the built-in microphone with adjustable sensitivity. You can also operate multiple devices in sync using the master/slave mode. 

Apart from the preset programs, the LED D-2000 can also be controlled via 5 or 9 DMX channels. For the addressing and settings (such as the color selection for 15 mixed colors, color changes, fade effects or dimmer effects) you can either use the 4-digit LED display and operating buttons on the rear of the device or the supplied IR remote control. 

What is more, the LED D-2000 is compatible with QuickDMX, the wireless DMX system by Eurolite. A phantom-powered USB port for a wireless transmission of the DMX signal through a QuickDMX receiver can be found on the rear of the device. 

Features Eurolite LED D-2000

• Absolute eyecatcher
• 5 x 10 W LED in the color red, green, blue, amber and white for dynamic strobe and derby effects
• Auto, music, master/slave and DMX mode
• Direct color selection for 15 preset colors
• DMX control via every standard DMX controller
• 5 or 9 DMX channels selectable
• 3 built-in auto and music show programs
• Sound-control via built-in microphone with adjustable microphone sensitivity
• The colorful beams change their direction of movement at every bass-beat in sound controlled mode
• Addressing and setting via control panel with 4-digit LED display
• Supports QuickDMX - the wireless DMX system from Eurolite
• Built-in phantom-powered USB port for QuickDMX receivers (accessories)
• Convenient wireless control via included IR remote control EUROLITE IR-7
• Function: static color, auto mode, sound control, interne programs, color change, color fade, dimmer and strobe effect
• Locking possibility at the mounting bracket
• Feed-through output allows to power up to 8 devices
• LED: 5 x high-power 10 W RGBWA
• Control: QuickDMX viaUSB (optional); Stand-alone; Sound to light viaMicrophone; IR remote control included; DMX

Technical data

• DMX connector: 3-pin XLR
• QuickDMX connector: USB, Type A
• Power supply: 110-240 V AC, 50/60 Hz
• Total connected load: 60 W
• LED: 5 x high-power 10 W RGBWA
• Flash rate: 0 - 20 Hz
• DMX channels: 5; 9
• Beam angle: 70°.
• Dimensions (L x W x H): 285 x 290 x 200 mm
• Weight: 2,50 kg