EVE Audio Studiomonitor SC205

TheEVE AUDIO SC205 is the second in line of the EVE Audio studio monitors. Like the name implies, it's a SilverCone two-way system with a 5" woofer.
But don't let your eyes deceive you. The SC205 might seem like a small speaker, but it definitely packs a punch. With an extended bass frequency response and an astounding output level, the SC205 will easily fill your room with exceptional sound.

The SC205 also comes with the convenience of threaded screw inserts on the bottom and the back. That way, you can mount your SC205 on a regular microphone or speaker stand, or use the back plate for different wall mounting options available on the market.

Features

The SC205 uses our 5" SilverCone woofer for an extended bass response. This very stiff diaphragm is honeycomb structured and glass fibre coated.
Like in other models, such as the smaller SC204, the SC205 is driven by a sophisticated magnet system that uses a 1" voice coil responsible for delivering a greater linear excursion. All in all, this produces a bigger dynamic range than you would naturally assume from a speaker of these proportions. The result is an unsurpassed audio transparency that, when coupled with our proprietary AMT tweeter and PWM amplifier, will surprise you with a very powerful and precise low end.

The AMT (Air Motion Transformer) tweeter is the own proprietary technology of Eve Audio that follows the rule of not using "off-the-shelf" components when looking for the best possible results. The preciseness and detail in the high frequency, along with the general tightness of the bass and mid-range frequencies, will make the SC205 equally adequate for use on the road or in studio.

DSP
With every EVE Audio speaker, you also get high resolution DSP electronics. One push knob operation and you will have access to accurate volume control and several different filter settings that will help you tailor your monitors to the way you work.
And if you always avoid digital processing, we've got you covered. The DSP engine is supported with a high quality A/D converter from Burr-Brown, which delivers a pristine signal to the DSP section. And since the PWM amplifiers are directly connected to the DSP, no additional conversion is necessary.

Specifications

Description 2-way System
Dimensions (WxHxD) [mm] 175 x 275 x 233
Dimensions (WxHxD) ["] 6.89 x 10.83 x 9.17
Free-field frequency range (-3dB) 53Hz - 21kHz
Tweeter AMT RS1
Mid-Woofer 130mm/5"
Cross-over frequency 3000Hz
Maximum SPL @ 1m 101dB
Number of amplifiers 2
Total short-term output power 100W
Output power (woofer) 50W
Output power (tweeter) 50W
Protection limiter
Mic stand thread inserts
Weight kg/lb. 5 / 11