EVE Audio SC407

The EVE SC407 is an active monitor speaker that combines quality precision and power. With three SilverCone chassis for low and middle frequencies and one tweeter, it works perfectly as a main studio speaker. Incredible bass reproduction, a very linear response, and plenty of power to shake up your main studio control room.
Both models - the SC407 and SC408 - feature a very powerful amplifier array, with one amplifier per driver. The larger woofers duplicate all frequencies up to a certain crossover frequency. The mid-range woofer picks up from there. EVE Audio’s four-way speakers are symmetrical, as the woofers do not serve different frequency bands, but essentially duplicating the bass frequencies with an utmost preciseness.
The stylish grey plate in the middle of the speaker not only houses the midrange woofer and AMT tweeter, but it can also be rotated so that you can place your speaker vertically or horizontally.

Two 6.5" SilverCone woofers along with its sophisticated 1.5" voice coil extend the bass frequency response down to 35Hz and work simultaneously up to 280Hz. A 4" SilverCone midrange unit joins the high quality bass drivers and endows these speakers with a greater linear excursion and clear and accurate midranges. The bass and mid woofers in the SC407 combine unique glass fibre coated diaphragms with stable honeycomb structure to deliver sound spectacularly detailed and clear.
The AMT RS3 (Ribbon System 3) tweeter houses a bigger magnet system to deliver a higher output level with virtually no distortion, even at high output levels.

Each driver is provided with its own PWM amplifier for a total short-term output power of 600 W. With a maximum output level of 116dB you'll definitely be able to judge your mixes precisely, whatever their intended output level is.

On the back side you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience. There are also two large rear rectangular ports with no hard edges for the bass port design.
For guaranteeing an accurate sound reproduction and acoustic precision the SC407 has a built-in high resolution DSP electronics. One push knob operation and you will have access to accurate volume control and several different filter settings that will help you tailor your monitors to the way you work. The DSP engine is supported with a high quality A/D converter from Burr-Brown, which delivers a pristine signal to the DSP section. And since the PWM amplifiers are directly connected to the DSP, no additional conversion is necessary.

As the SC407 combines perfectly powerful bass with a very transparent mid-range and crystal clear high frequencies, it is predestined to be the perfect tool for mid-to-large size control rooms, where quality and consistent power output are the most important variables.


Features

Accurate sound reproduction and acoustic precision
Versatile operation for many applications
4 x PWM amplifier with protection-limiting
Extended bass frequency response (down to 35 Hz), courtesy of three SilverCone chassis
Tweeter with Air Motion Transformer RS3
High resolution DSP electronics for accurate sound reproduction
Bass Port Design: high sound pressures with tight and punchy bass frequencies that don't cause port distortion


Specifications

4-way System
Free-field frequency range (-3dB): 35 - 21.000 Hz
Tweeter: AMT RS3
Mid-Woofer: 100mm / 4"
Woofer: 2 x 165mm / 6.5"
Cross-over frequency: 280Hz/3000Hz
Maximum SPL @ 1m: 116dB
Number of amplifiers: 4
Total short-term output power: 600W
Output power (woofer): 2 x 185W
Output power (mid-woofer): 180W
Output power (tweeter): 50W
Protection limiter: yes
Setting:
- Volume: -inf. - +6dB
- High-shelf filter (-5dB - +3dB): > 3 kHz
- Desk filter boost (0dB - +3dB): 80Hz
- Desk filter cut (-5dB - 0dB): 160Hz
- Low-shelf filter (-5dB - +3dB): < 300Hz
Level-lock dip switch: yes
Filter-lock dip switch: yes
Input level dip switch: +7dBu/+22dBu
Connectors: XLR- and RCA in (impedance)
Power consumption: Standby < 1W; Full output: 300VA
Dimensions (W x H x D): 600mm x 260mm x 320mm / 23.62" x 10.24" x 12.6"
Weight: 18 kg / 39.7 lb.