Electro-Voice Q-1212

The Electro Voice Amplifier Q1212 offers with 2 x 2400 W (4 Ohms) and 2 x 1800 W (2 Ohms) a very high performance. The Q1212 provides the same power as the legendary P3000 from a 2 RU chassis at modest weight, making it a great subwoofer or high-power top drive for Phoenix, Tour X and Zx3/Zx5 systems and many more system combinations.

The Electro Voice Q1212 is especially created for clubs, concerts and other applications.

Features:

Designed also for Performance & Sports Venues, Pro Music, and so on
Up to 2 x 2400 W into 2 ohms
XLR pass-though input connections
The NL4 connection on output A also carries output B on pins +/- 2 to allow easy connection to bi-amped loudspeakers
Switchable LPN filter extra tonal fundamentals and “kick” with a protective low-cut for 12” or 15” loudspeakers without additional subwoofers
Class-H design
Three-stage front-to-rear fans
Complete protection package
Classic EV amplifier dynamic headroom for real-world music and applications
Built-in dynamic limiters

Technical Data:

Amplifier Gain 32 dB
Continuous Rated Power (1 kHz, THD 1%) 2Ω 1800 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 1200 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 750 Watts
Continuous Rated Power (20-20 kHz, THD < 0,2%) 4Ω 1100 Watts
Continuous Rated Power (20-20 kHz, THD < 0,2%) 8Ω 550 Watts
Cooling Front-to-Rear, 3-stage fans
DIM 30 0.05 %
Electronics Type Amplifier
Frequency Response 10 Hz - 40 kHz
nput Impedance (Balanced) 20 kΩ
Input Sensitivity +6.6 dBu
Intermodulation Distortion (SMPTE) 0.1 %
Mains Voltage 100 V, 120 V, 230 V or 240 V; 50-60 Hz (factory configured)
Maximum Bridged Output 4Ω 3600 Watts
Maximum Bridged Output 8Ω 2400 Watts
Maximum Input Voltage +21 dBu (8.69 Vrms)
Network Control (IRIS-Net) No
Signal-to-Noise Ratio (A-weighted) 110 dB
Slew Rate 30 V/µs
Height 2RU 88.1 mm (3.47")
Width 483 mm (19.02")
Depth 421.5 mm (16.59")
Weight Net 17.7 kg (39.02 lbs)