Ecler XPA-11000

Short Description:

Ecler XPA Power amplifier series offers the renowned professional reliability of all Ecler amplifiers at an affordable price. The liShort Description:

Ecler XPA 11000 Power amplifier series offers the renowned professional reliability of all Ecler amplifiers at an affordable price. The line consists of four models with power outputs of 300, 500, 700 and 1100W per channel at 4. All models employ MOSFET amplification technology, are 2 rack units high and are based on a robust chassis with aluminium front panel. Thanks to their oversized power supply, these amplifiers can operate comfortably with 4 and even 2 loads.

They feature balanced input connections via XLR3 and 1/4" Jacks. The outputs offer total versatility thanks to secure connection posts with standardized separation and Speakon® sockets. An electronic limiting system for avoiding signal overloads and a switchable subsonic filter are also on board.


Features:

Highly effective progressive cooling system. Air flow rises as a function of amplifier temperature. “Back to Front” cooling system takes air from the rear and throws it out at the front panel.
XPA11000 features class H technology (3 steps)
Easily accessible input attenuation controls on the front panel may be tampered
Indicators for Signal Present (SP), Clipping (CLIP) and activation of protection circuits (PROT)
Effective protection systems against shortcircuit, excessive temperature due to accidental blocking of air flow or other circumstances, DC at the output… to protect the amplifier and loudspeakers.
Built-in, always active anticlip circuit
Switchable subsonic filter, 30 Hz 18dB/oct slope
Operating mode selector: STEREO, PARALLEL and BRIDGE
Input sensitivity selector (0.775, 1, 1,4V)
Balanced inputs via XLR3 and 6,35mm TRS Jack sockets
Outputs on connection posts and Speakon® connectors
Operation with 8, 4 and 2 or 4 in bridged mode.
2 year warranty

Technical Data:

POWER 20-20kHz 1% THD Both channels driven:
4 Ohm Stereo: 1180 WRMS
8 Ohm Stereo: 745 WRMS
8 Ohm Bridged: 2360 WRMS
Peak power 2 Ohm Stereo: 1050 WRMS
Frequency response (-1dB/-3dB): 10Hz/60kHz
High pass filter (-3dB): 30Hz/18dB oct.
Slew Rate: ±30V/ms
Input connectors: XLR3 & 1/4” Jack balanced
Input Sensitivity / Impedance: 0.775V, 1V, 1.4V/20kOhm Bal. 10kOhm Unbal
Signal present indicator: -40dB
Output connectors: Speakon & Binding Posts
Mains: Depending on your country. See characteristics in the back of the unit.
Power consumption (EN 55103-1): 1230VA
Dimensions: 482.6 x 88 x 45 2mm
Weight: 23,6 Kgne consists of four models with power outputs of 300, 500, 700 and 1100W per channel at 4. All models employ MOSFET amplification technology, are 2 rack units high and are based on a robust chassis with aluminium front panel. Thanks to their oversized power supply, these amplifiers can operate comfortably with 4 and even 2 loads.

They feature balanced input connections via XLR3 and 1/4" Jacks. The outputs offer total versatility thanks to secure connection posts with standardized separation and Speakon® sockets. An electronic limiting system for avoiding signal overloads and a switchable subsonic filter are also on board.


Features:

Highly effective progressive cooling system. Air flow rises as a function of amplifier temperature. “Back to Front” cooling system takes air from the rear and throws it out at the front panel.
XPA11000 features class H technology (3 steps)
Easily accessible input attenuation controls on the front panel may be tampered
Indicators for Signal Present (SP), Clipping (CLIP) and activation of protection circuits (PROT)
Effective protection systems against shortcircuit, excessive temperature due to accidental blocking of air flow or other circumstances, DC at the output… to protect the amplifier and loudspeakers.
Built-in, always active anticlip circuit
Switchable subsonic filter, 30 Hz 18dB/oct slope
Operating mode selector: STEREO, PARALLEL and BRIDGE
Input sensitivity selector (0.775, 1, 1,4V)
Balanced inputs via XLR3 and 6,35mm TRS Jack sockets
Outputs on connection posts and Speakon® connectors
Operation with 8, 4 and 2 or 4 in bridged mode.
2 year warranty


Technical Data:

POWER 20-20kHz 1% THD Both channels driven:
4 Ohm Stereo: 1180 WRMS
8 Ohm Stereo: 745 WRMS
8 Ohm Bridged: 2360 WRMS
Peak power 2 Ohm Stereo: 1050 WRMS
Frequency response (-1dB/-3dB): 10Hz/60kHz
High pass filter (-3dB): 30Hz/18dB oct.
Slew Rate: ±30V/ms
Input connectors: XLR3 & 1/4” Jack balanced
Input Sensitivity / Impedance: 0.775V, 1V, 1.4V/20kOhm Bal. 10kOhm Unbal
Signal present indicator: -40dB
Output connectors: Speakon & Binding Posts
Mains: Depending on your country. See characteristics in the back of the unit.
Power consumption (EN 55103-1): 1230VA
Dimensions: 482.6 x 88 x 45 2mm
Weight: 23,6