Producten van: Heatscope
With Heatscope, the concept of conventional radiant heaters has been turned on its head. Instead of conventional halogen light tubes or quartz elements, Heatscope radiant heaters use two spirals of carbon fiber that are energized. This newly developed concept has numerous advantages compared to conventional radiant heaters Very fast warm-up time of less than 60 seconds to full power Uniform and broad heat emission ensures pleasant body heat instead of only spot heating Significantly reduced light emission - Only a subtle shimmering orange ambient light can be heard Very efficient - up to 90% of the energy used is converted directly into heat All radiators produce natural infrared heat in the (fast) IR medium wave range. This heat feels particularly pleasant and works exactly where it is needed - namely directly under the first layers of the skin, but not too deep in the tissue. Heatscope heaters are developed, designed and manufactured in Germany. So front to back, 100% Made in Germany. In addition to the beneficial heat output, the Heatscope radiant heaters can also convince with their elegant design. They nestle elegantly into any ambience and provide a relaxed, unobtrusive overall appearance. All the accessories needed for installation are included. Simply unpack, install and enjoy the warmth. Features Heatscope Vision 2200 Radiant heater for catering, patios and weather-protected outdoor applications Vision model offers wider heat output - Ideal for indoor or wind-protected outdoor use Recommended outdoor temperature use from 10 degrees Patented ventilated reflector heating system provides even heat output Energy-efficient double carbon heating elements with satinized surface Reduced light output with higher heat radiation at the same time Instrumented ceramic glass front Coated aluminum body Incl. complete accessories for wall and ceiling mounting Protection class IP44 - Suitable for weather-protected outdoor use Convenient & easy operation by remote control: on/off, 50%, 100% Maintenance-free and extremely high quality finish - Designed to operate for more than 10,000 hours Planned, designed, developed and manufactured in Germany Technical data Power: 2.200 Watt | 9.57 A Visible light: < 300 lumens Radiant efficiency: > 90 % Max. Power available in 30 to 60 seconds Protection class: IP44 Recommended installation height: 1.8 - 2.5 meters Weight: 8 kg Dimensions (W x D x H): 1160 x 184 x 87 mm Scope of delivery Heatscope Vision 2200 radiant heater Infrared remote control 2x 60mm extension for ceiling mounting 2x 11mm mounting brackets 2x joints for alignment 2x 9mm oval mounting skirts
With Heatscope, the concept of conventional radiant heaters has been turned on its head. Instead of conventional halogen light tubes or quartz elements, Heatscope radiant heaters use two spirals of carbon fiber that are energized. This newly developed concept has numerous advantages compared to conventional radiant heaters Very fast warm-up time of less than 60 seconds to full power Uniform and broad heat emission ensures pleasant body heat instead of only spot heating Significantly reduced light emission - Only a subtle shimmering orange ambient light can be heard Very efficient - up to 90% of the energy used is converted directly into heat All radiators produce natural infrared heat in the (fast) IR medium wave range. This heat feels particularly pleasant and works exactly where it is needed - namely directly under the first layers of the skin, but not too deep in the tissue. Heatscope heaters are developed, designed and manufactured in Germany. So front to back, 100% Made in Germany. In addition to the beneficial heat output, the Heatscope radiant heaters can also convince with their elegant design. They nestle elegantly into any ambience and provide a relaxed, unobtrusive overall appearance. All the accessories needed for installation are included. Simply unpack, install and enjoy the warmth. Features Heatscope Vision 3200 Radiant heater for catering, patios and weather-protected outdoor applications Vision model offers wider heat output - Ideal for indoor or wind-protected outdoor use Recommended outdoor temperature use from 10 degrees Patented ventilated reflector heating system provides even heat output Energy-efficient double carbon heating elements with satinized surface Reduced light output with higher heat radiation at the same time Instrumented ceramic glass front Coated aluminum body Incl. complete accessories for wall and ceiling mounting Protection class IP44 - Suitable for weather-protected outdoor use Convenient & easy operation by remote control: on/off, 50%, 100% Maintenance-free and extremely high quality finish - Designed to operate for more than 10,000 hours Planned, designed, developed and manufactured in Germany Technical data Power: 3.200 Watt | 13.91 A Visible light: < 300 lumens Radiant efficiency: > 90 % Max. Power available in 30 to 60 seconds Protection class: IP44 Recommended installation height: 1.8 - 2.5 meters Weight: 11 kg Dimensions (W x D x H): 1660 x 184 x 87 mm Scope of delivery Heatscope Vision 3200 radiant heater Infrared remote control 2x 60mm extension for ceiling mounting 2x 11mm mounting brackets 2x joints for alignment 2x 9mm oval mounting skirts
With Heatscope, the concept of conventional radiant heaters has been turned on its head. Instead of conventional halogen light tubes or quartz elements, Heatscope radiant heaters use two spirals of carbon fiber that are energized. This newly developed concept has numerous advantages compared to conventional radiant heaters Extremly fast warm-up time of less than 15 seconds to full power Uniform and broad heat emission ensures pleasant body heat instead of only spot heating Significantly reduced light emission - Only a subtle shimmering orange ambient light can be heard Very efficient - up to 94% of the energy used is converted directly into heat All radiators produce natural infrared heat in the (fast) IR medium wave range. This heat feels particularly pleasant and works exactly where it is needed - namely directly under the first layers of the skin, but not too deep in the tissue. Heatscope heaters are developed, designed and manufactured in Germany. So front to back, 100% Made in Germany. In addition to the beneficial heat output, the Heatscope radiant heaters can also convince with their elegant design. They nestle elegantly into any ambience and provide a relaxed, unobtrusive overall appearance. All the accessories needed for installation are included. Simply unpack, install and enjoy the warmth. Features Heatscope Spot 2200 Radiant heater for catering, patios and outdoor applications Spot model provides more localized heat output - Ideal for exposed, wind-prone areas Can also be used at lower temperatures Patented ventilated reflector heating system provides even heat output Energy-efficient double carbon heating elements with satinized surface Reduced light output with higher heat radiation at the same time Louvered protective grille Coated aluminum body Incl. complete accessories for wall and ceiling mounting Protection class IP44 - Suitable for weather-protected outdoor use Convenient & easy operation by remote control: on/off, 50%, 100% Maintenance-free and extremely high quality finish - Designed to operate for more than 10,000 hours Planned, designed, developed and manufactured in Germany Technical data Power: 2.200 Watt | 9.57 A Visible light: < 600 lumens Radiant efficiency: > 94 % Max. Power available in less than 15 seconds Protection class: IP24 Recommended installation height: 1.8 - 3.0 meters Weight: 4.5 kg Dimensions (W x D x H): 810 x 184 x 78 mm Scope of delivery Heatscope Spot 2200 radiant heater Infrared remote control 2x 60mm extension for ceiling mounting 2x 11mm mounting brackets 2x joints for alignment 2x 9mm oval mounting skirts
With Heatscope, the concept of conventional radiant heaters has been turned on its head. Instead of conventional halogen light tubes or quartz elements, Heatscope radiant heaters use two spirals of carbon fiber that are energized. This newly developed concept has numerous advantages compared to conventional radiant heaters Extremly fast warm-up time of less than 15 seconds to full power Uniform and broad heat emission ensures pleasant body heat instead of only spot heating Significantly reduced light emission - Only a subtle shimmering orange ambient light can be heard Very efficient - up to 94% of the energy used is converted directly into heat All radiators produce natural infrared heat in the (fast) IR medium wave range. This heat feels particularly pleasant and works exactly where it is needed - namely directly under the first layers of the skin, but not too deep in the tissue. Heatscope heaters are developed, designed and manufactured in Germany. So front to back, 100% Made in Germany. In addition to the beneficial heat output, the Heatscope radiant heaters can also convince with their elegant design. They nestle elegantly into any ambience and provide a relaxed, unobtrusive overall appearance. All the accessories needed for installation are included. Simply unpack, install and enjoy the warmth. Features Heatscope Spot 1600 Radiant heater for catering, patios and outdoor applications Spot model provides more localized heat output - Ideal for exposed, wind-prone areas Can also be used at lower temperatures Patented ventilated reflector heating system provides even heat output Energy-efficient double carbon heating elements with satinized surface Reduced light output with higher heat radiation at the same time Louvered protective grille Coated aluminum body Incl. complete accessories for wall and ceiling mounting Protection class IP44 - Suitable for weather-protected outdoor use Convenient & easy operation by remote control: on/off, 50%, 100% Maintenance-free and extremely high quality finish - Designed to operate for more than 10,000 hours Planned, designed, developed and manufactured in Germany Technical data Power: 1.600 Watt | 6.96 A Visible light: < 600 lumens Radiant efficiency: > 94 % Max. Power available in less than 15 seconds Protection class: IP24 Recommended installation height: 1.8 - 3.0 meters Weight: 4 kg Dimensions (W x D x H): 670 x 184 x 78 mm Scope of delivery Heatscope Spot 1600 radiant heater Infrared remote control 2x 60mm extension for ceiling mounting 2x 11mm mounting brackets 2x joints for alignment 2x 9mm oval mounting skirts
With Heatscope, the concept of conventional radiant heaters has been turned on its head. Instead of conventional halogen light tubes or quartz elements, Heatscope radiant heaters use two spirals of carbon fiber that are energized. This newly developed concept has numerous advantages compared to conventional radiant heaters Very fast warm-up time of less than 60 seconds to full power Uniform and broad heat emission ensures pleasant body heat instead of only spot heating Significantly reduced light emission - Only a subtle shimmering orange ambient light can be heard Very efficient - up to 90% of the energy used is converted directly into heat All radiators produce natural infrared heat in the (fast) IR medium wave range. This heat feels particularly pleasant and works exactly where it is needed - namely directly under the first layers of the skin, but not too deep in the tissue. Heatscope heaters are developed, designed and manufactured in Germany. So front to back, 100% Made in Germany. In addition to the beneficial heat output, the Heatscope radiant heaters can also convince with their elegant design. They nestle elegantly into any ambience and provide a relaxed, unobtrusive overall appearance. All the accessories needed for installation are included. Simply unpack, install and enjoy the warmth. Features Heatscope Vision 1600 Radiant heater for catering, patios and weather-protected outdoor applications Vision model offers wider heat output - Ideal for indoor or wind-protected outdoor use Recommended outdoor temperature use from 10 degrees Patented ventilated reflector heating system provides even heat output Energy-efficient double carbon heating elements with satinized surface Reduced light output with higher heat radiation at the same time Instrumented ceramic glass front Coated aluminum body Incl. complete accessories for wall and ceiling mounting Protection class IP44 - Suitable for weather-protected outdoor use Convenient & easy operation by remote control: on/off, 50%, 100% Maintenance-free and extremely high quality finish - Designed to operate for more than 10,000 hours Planned, designed, developed and manufactured in Germany Technical data Power: 1.600 Watt | 6.96 A Visible light: < 300 lumens Radiant efficiency: > 90% Max. Power available in 30 to 60 seconds Protection class: IP44 Recommended installation height: 1.8 - 2.5 meters Weight: 6 kg Dimensions (W x D x H): 810 x 184 x 87 mm Scope of delivery Heatscope Vision 1600 radiant heater Infrared remote control 2x 60mm extension for ceiling mounting 2x 11mm mounting brackets 2x joints for alignment 2x 9mm oval mounting skirts
With Heatscope, the concept of conventional radiant heaters has been turned on its head. Instead of conventional halogen light tubes or quartz elements, Heatscope radiant heaters use two spirals of carbon fiber that are energized. This newly developed concept has numerous advantages compared to conventional radiant heaters Extremely fast warm-up time of less than 15 seconds to full output Uniform and broad heat emission ensures pleasant body heat instead of only spot heating Significantly reduced light emission - Only a subtle shimmering orange ambient light can be heard Very efficient - up to 94% of the energy used is converted directly into heat All radiators produce natural infrared heat in the (fast) IR medium wave range. This heat feels particularly pleasant and works exactly where it is needed - namely directly under the first layers of the skin, but not too deep in the tissue. Heatscope heaters are developed, designed and manufactured in Germany. So front to back, 100% Made in Germany. In addition to the beneficial heat output, the Heatscope radiant heaters can also convince with their elegant design. They nestle elegantly into any ambience and provide a relaxed, unobtrusive overall appearance. All the accessories needed for installation are included. Simply unpack, install and enjoy the warmth. Features Heatscope Spot 2800 Radiant heater for gastronomy, terraces and outdoor use Spot model provides more spot heat - Ideal for exposed, wind-prone areas Can also be used at lower temperatures Patented rear-ventilated reflector heating system provides even heat output Energy-efficient double carbon heating elements with satinized surface Reduced light output with higher heat radiation at the same time Louvered protective grille Coated aluminum body Incl. complete accessories for wall and ceiling mounting Protection class IP24 - suitable for outdoor use Convenient & easy operation via remote control: On/Off, 50%, 100% Maintenance-free and extremely high quality finish - Designed to operate for more than 10,000 hours Planned, designed, developed and manufactured in Germany Technical data Power: 2.800 Watt | 12.17 A Visible light: < 600 lumens Radiant efficiency: > 94 Max. Power available in less than 15 seconds Protection class: IP24 Recommended installation height: 1.8 - 3.0 meters Weight: 5.0 kg Dimensions (W x D x H): 884 x 184 x 78 mm Scope of delivery Heatscope Spot 2800 radiant heater Infrared remote control 2x 60mm extension for ceiling mounting 2x 11mm mounting brackets 2x joints for alignment 2x 9mm oval mounting aprons
Usually HEATSCOPE PURE design radiant heaters and NEXT Energy heaters are installed on the wall or ceiling. However, in order to be able to use the radiators flexibly on the terrace or in the garden, the HEATSCOPE STAND design-stand system was designed and constructed. With the help of the HEATSCOPE STAND, heat comes to any place in the garden or on the terrace - and in its most beautiful and pleasant form. Specific weather protection is not necessary with the STAND: PURE and NEXT has IPX5 protection class against water jets from all directions. Thus, the radiant heater together with the STAND can be used anywhere outdoors - even heavy rain or snowfall will not bother it at all. The best thing about the STAND: the radiation angle of the heat can be adjusted individually - just like wall or ceiling mounting! The HEATSCOPE® STAND was designed and developed exclusively for the HEATSCOPE model series PURE + NEXT. Unfortunately, it does not work with the ambient heaters VISION or the power heater SPOT nor with heaters of other manufacturers. Features Heatscope Stand Stand suitable for all Heatscope PURE or NEXT radiant heaters Suitable for outdoor use Base made of galvanized steel Mounting bracket made of powder-coated stainless steel Connecting spar made of powder-coated aluminum Adjustable beam angle Completely weatherproof Supplied with Schuko plug and ILME plug (spotlight side) Technical data Connection: 220-240 V AC~ Protection class: IP65 Weight: 25.5 kg Dimensions: ø 600 x 2151 mm The radiant heaters shown in the photos are NOT included in the scope of delivery.
SMARTBOX is THE control unit for the HEATSCOPE® PURE! Simply mount it between the power supply and the heater and it is possible to switch the PURE ON and OFF, reduce it to 50% power or go back to full 100% with the included HEATSCOPE® IR remote control. Features Heatscope Smartbox Smartbox for advanced control of the PURE radiant heater Horizontal & vertical mountable - directly on the heater, next to it, etc. Combination mounting bracket - for installation directly on the radiator Convex shaped translucent front screen Plastic housing With HEATSCOPE® infrared remote control With wall/ceiling mounting plate for installation with PURE mounting bracket Auto power off after 4, 6 or 8 hours (deactivation possible) IP protection class 65 - installation without weather protection! Remote control + batteries included Technical data Connection: 220-240 V AC~ Weight: 0,35 kg / 0,51 kg incl. mounting plate Protection class: IP65 Dimensions: 100 x 170 x 35,5 mm
SMARTBOX is THE control unit for the HEATSCOPE® PURE! Simply mount it between the power supply and the heater and it is possible to switch the PURE ON and OFF, reduce it to 50% power or go back to full 100% with the included HEATSCOPE® IR remote control. For those who already have a somfy® I/O controller in use, the SMARTBOX is also available as a separate somfy® version for integration into an existing I/O system. Features Heatscope Smartbox SOMFY Smartbox for extended control of the PURE radiant heater Horizontal & vertical mountable - directly at the radiator, next to it etc. Combination mounting bracket - for installation directly on the radiator Convex shaped translucent front screen Plastic housing Somfy® I/O version With wall/ceiling mounting plate for installation with PURE mounting bracket IP protection class 65 - installation without weather protection! Technical data Connection: 220-240 V AC~ Weight: 0,35 kg / 0,51 kg incl. mounting plate Protection class: IP65 Dimensions: 100 x 170 x 35,5 mm
De slimme hefbediening stelt je in staat om een HEATSCOPE-infraroodstraler netjes in het plafond te integreren en tegelijkertijd een veilige werking te garanderen. Het systeem schuift de gemonteerde straler automatisch uit de plafonduitsparing zodra je hem inschakelt – en na een gedefinieerde afkoelperiode weer terug. Zo blijft de installatie onopvallend, functioneel en wordt het apparaat betrouwbaar beschermd tegen warmteophoping. Automatisch uit- en inrijmechanisme De geïntegreerde elektronica detecteert betrouwbaar wanneer er meer dan 0,5 A stroom loopt en activeert het hefmechanisme. De straler wordt vervolgens ongeveer 13 cm uit het plafond neergelaten om de benodigde luchtcirculatie te garanderen. Na het uitschakelen rijdt de eenheid automatisch terug na een afkoeltijd van 180 seconden. Het volledig automatische proces zorgt ervoor dat jij je nergens zorgen over hoeft te maken en dat de techniek altijd optimaal functioneert. Compact ontwerp voor diverse inbouwsituaties Het hefmechanisme bestaat uit een stabiele scharnierconstructie met een krachtige lineaire actuator. Dankzij het slanke ontwerp is de eenheid geschikt voor verschillende plafonduitsparingen en inbouwomgevingen – van serres tot terrassen en overdekte horecagebieden. Optioneel verkrijgbare inbouwcassettes en frames maken een vlak en optisch strak geïntegreerd resultaat mogelijk. De flexibele aanpasbaarheid maakt het systeem aantrekkelijk voor moderne binnen- en buitenarchitectuur. Veilige en betrouwbare besturing De besturingsbox wordt direct naast de plafonduitsparing geïnstalleerd en bewaakt zowel de motorloop als de temperatuur. Wanneer de elektronica boven de 60 °C komt, wordt de hef alleen nog maar uitgeschoven om schade te voorkomen. Bovendien biedt de besturing visuele feedback via meer-kleurige LED’s die duidelijk de status van het systeem aangeven. De intelligente veiligheidslogica zorgt ervoor dat het gebruik altijd gecontroleerd en beschermd blijft. Ontwikkeld voor HEATSCOPE VISION en SPOT Het complete hefsysteem is uitsluitend ontworpen voor HEATSCOPE VISION- en SPOT-stralers en is perfect afgestemd op hun prestaties en werking. Alleen in deze combinatie wordt de warmtehuishouding correct afgevoerd en de mechanica nauwkeurig aangestuurd. De speciaal afgestemde compatibiliteit garandeert langdurige betrouwbaarheid en een soepele werking. Kenmerken Heatscope LIFT Slimme plafondinbouwoplossing voor het volledig automatisch laten zakken en intrekken van een HEATSCOPE-infraroodstraler Automatisch uitschuiven bij een stroomafname boven 0,5 A en automatisch inschuiven na ca. 180 seconden Robuuste hefmodule met scharniermechaniek en 24 V-lineaire actuator Besturingsbox met geïntegreerde stroommonitoring, temperatuurcontrole en LED-statusindicaties Mogelijkheid tot vlakke plafondinbouw met optionele inbouwcassette of frame Geschikt voor HEATSCOPE VISION- en SPOT-modellen volgens fabrikantsgoedkeuring Installatie in overdekte buitenruimtes, horeca, serres, terrassen en meer Veilige werking dankzij overtemperatuurbeveiliging en gedefinieerde hefwegen Compacte besturingsbox voor montage naast de plafonduitsparing Technische gegevens Spanning: 24 V DC Bedrijfsspanning (stralerbesturing): 220–240 V AC ~ 50/60 Hz Aandrijving: lineaire hefcylinder, 24 V DC Max. motorstroom: 1,5 A Meetcircuit: 2 stroombanen | max. 230 V AC 16 A | dezelfde fase Aanbevolen inbouwhoogte: 1,80 m tot 2,50 m Afkoeltijd: 3 minuten IP-beschermingsklasse: IP 30 Afmetingen hefsysteem: 584 x 100 x 207 mm Afmetingen besturingsbox: 235 x 165 x 95 mm Gewicht (hefsysteem zonder straler): 4 kg Totale gewicht: 25,5 kg Afmetingen (B x D x H): 584 x 207 x 100 mm Geschikt voor Spot- en Vision-stralers – levering zonder straler