Dynacord CL 1200 / 230V

Through the use of an optimized power supply with low dispersion toroidal transformers as well as of Class H technology a large amount of headroom above the specified nominal output has been achieved along with a considerable reduction in weight and thermal leakage. The CL Series power amplifiers satisfy all the criteria for punishing ‘on the road’ use. They are reliably protected against overheating, overload and short-circuits as well as high frequency and DC at the output. The DYNACORD CL 1200 amplifier constantly monitor the input- versus the output signal by means of super-fast audio processors which send -in case of non-linear operation- control parameters to the limiters. The limiters are thus operating dynamically and do not affect the amplifiers dynamic capabilities as they control the input gain level.

Features

• Comprehensive protection system - protection against overheating, overload, short circuit, HF and DC
• Patented LPN filter - switchable frequency and phase response correction of connected loudspeakers

Technical Data

• Load Impedance: 2 Ω, 4 Ω, 8 Ω
• Max. Midband, Output Power, THD = 1%, 1kHz , Dual Channel: 2 Ω - 900W, 4 Ω - 600W, 8 Ω - 350W
• Rated Output Power, THD

< 0,1%, 20Hz … 20kHz: 4 Ω - 500W, 8 Ω - 250W

• Max. Single Channel, Output Power, Dynamic Headroom, IHF-A: 2 Ω - 1450W, 4 Ω - 850W, 8 Ω - 450W
• Max. Single Channel, Output Power, Continuous, 1kHz: 2 Ω - 1200W, 4 Ω - 720W, 8 Ω - 410W
• Maximum RMS Voltage Swing, THD = 1%, 1kHz: 62V
• Max. Bridged, Output Power, THD = 1%, 1kHz: 4 Ω - 1800W, 8 Ω - 1200W
• Frequency Response, ref. 1kHz (- 1dB): 15Hz … 40kHz
• Signal to Noise Ratio, Amplifier, A-weighted: 105,5 dB
• Dimensions (W x H x D) mm: 483 x 88,1 x 386,8
• Weight: 15 kg (33 lbs)

Operating instruction