Alesis actif M1 520 USB (paire)

The Alesis M1Active 520 USB is a professional studio monitoring system designed for studio use with an internal digital-audio interface. M1Active 520 USB consists of a pair of active, bi-amplified, two-way reference monitors that play from 20,000 Hz all the way down to 56 Hz to cover nearly all frequencies audible to human ears. You can take USB digital signal out of your computer via USB and input it to M1Active 520 USB for low-noise, low-distortion performance. Priced attractively for any studio's budget, M1Active 520 USB perform with linearity, clarity, and neutrality typically reserved for monitors that cost much more.
When you reach for the convenient front panel volume control, you can be confident that the power you need will be there with M1Active 520 USB's bi-amplified design delivering 30W per speaker. Like the rest of the M1Active series, M1Active 520 USB are magnetically shielded, so there's never an issue of placement near computer screen, LCDs, or hard drives.

M1Active 520 USB feature a large, front-panel, bi-color indicator that indicates presence of signal in blue and clipping in red for instant feedback on system status.
In addition to their capabilities as traditional monitor loudspeakers, M1Active 520 USB monitors contain a USB audio interface. Connected audio sources such as mic preamps and instruments can be recorded directly into your computer at 16-bit, 44.1 or 48 kHz. Simply plug the USB cable into your computer. No special drivers required. And when it's time to listen back to your mixes, that same USB cable sends 16-bit, 44.1 or 48 kHz, stereo audio from computer to your M1Active 520 USBs. No more complicated interfaces and messy cable tangles.

Features

Active, two-way, bi-amplified pair of reference studio-monitor loudspeakers

Wide, 56 – 20,000 Hz frequency response

60W system with 30W per speaker

Low-resonance cabinet with tuned bass port

Five-inch lightweight polypropylene woofer

One-inch silk-dome tweeter

Integrated USB audio interface with 16-bit, 44.1/48 kHz recording and playback

Two balanced-1/4" inputs

Stereo, 1/4" headphone output

Magnetically shielded for placement near TV and computer monitors

Bi-color signal/clip indicator

Switchable power supply ensures worldwide operation

Technical Data

Low-frequency driver: 5” lightweight, magnetically-shielded, ultra-stiff polypropylene cone with rubber surround and high power handling voice coil

High-frequency driver: one-inch silk dome with magnetic shielding

Frequency Response: 56 - 20,000 Hz

Power: 50 W / 25 W per channel RMS

Signal-to-Noise Ratio: >90dB weighted

Digital Conversion: 16-bit delta sigma, 44.1kHz or 48kHz sampling rate

Inputs: two balanced-1/4”

Polarity: Positive signal on “+” pin creates forward cone displacement

Input Impedance: 10k ohms

Input Level: -10dBV nominal, balanced

Dynamic Range: >80dB