We recommend these alternative products for you
Martin Magnum 650
€129.00 Prices incl. VAT
Questions? Personal advice: +49 9951 - 690 190
Product description Martin Magnum 650
To make beams of light and other effects visible in a room, an evenly generated burst of fog is needed. The Martin Magnum 650 is a compact fog machine designed for this purpose and produces a maximum fog output of around 160 m³ per minute. Its 600 W heater block with overheat protection heats up in around seven minutes.
It is operated using the permanently attached wired remote control: hold down the switch to produce fog, and release it to stop the output. An indicator on the remote shows the heating status; it lights up while the machine is heating and goes out once operating temperature is reached. At full output, the stated maximum operating time is around 47 minutes.
The 1-litre fluid tank supplies a high-pressure oscillating pump. At maximum output, the machine consumes up to 23 ml of fluid per minute. Use only approved Martin/JEM fog fluids; DJ and ZR fluids are intended for use and produce different fog effects. The fluid level can be checked on the machine.
The steel and aluminium housing is designed for floor operation; no flight yoke is available. Connections consist of a permanently wired remote-control cable and a three-pin IEC appliance inlet for the power supply. When positioning the machine, ensure there is sufficient clearance in front of the nozzle and that the local mains voltage matches the respective device version.
With its compact format and handheld remote control, the Magnum 650 is suitable for mobile DJ setups, parties and smaller event spaces where you want to make beams of light visible with fog. The housing dimensions, tank capacity, mains voltage version and required fuse ratings help you plan the space required and the electrical connection in advance.
Features Martin Fog Machine Magnum 650
Fog machine for enhancing lighting and stage effects
Maximum fog output of approx. 160 m³ per minute
600 W heater block with overheat protection
Heat-up time of approx. 7 minutes
Maximum operating time at full output of approx. 47 minutes
Automatic output adjustment during continuous fog production
1-litre fluid tank with level indicator
High-pressure oscillating pump with fluid consumption of up to 23 ml per minute
Compatible with approved Martin/JEM DJ and ZR fog fluids
Permanently attached handheld remote control with switch and heating status indicator
Steel and aluminium housing
Floor-standing operation; no flight yoke available
Technical specifications
Maximum fog outputapprox. 160 m³/min
Maximum operating time at full outputapprox. 47 min
Heat-up timeapprox. 7 min
Heater block600 W, with overheat protection
Fluid pumpHigh-pressure oscillating pump
Fluid tank1 l
Maximum fluid consumption23 ml/min
Housing materialSteel and aluminium
Controlhard-wired remote control with switch
Remote-control connectionhard-wired
Mains connection3-pin IEC appliance inlet
Mains voltage, EU models220–240 V nominal, 50 Hz
Mains voltage, US models110–120 V, 60 Hz
Main fuse at 220–240 V5 A slow-blow
Main fuse at 110–120 V10 A slow-blow
Maximum ambient temperature40 °C
Maximum housing temperature during steady-state operation50 °C
Maximum nozzle temperature200 °C
EU safety standardsEN 50 081-1, EN 50 082-1 | EN 60 335-1 (1995)
US safety standardUL 60335-1
Weight4.2 kg
Dimensions (W x D x H)216 x 293 x 170 mm
Scope of delivery
Martin Magnum 650 fog machine
Wired remote control
IEC mains lead without mains plug, 1.5 m (P/N 11501012)
Fluid container, 1 l
Manual (P/N 35010024)
Parkring 3
85748 Garching b. München
Germany