We recommend these alternative products for you
Martin Magnum 550
€105.00 Prices incl. VAT
Questions? Personal advice: +49 9951 - 690 190
Product description Martin Magnum 550
For a fog machine in mobile lighting setups, a short warm-up time and straightforward operation are important. The Martin Magnum 550 produces up to 160 m³ of fog per minute and distributes it via a 600 W ECO-Mass vaporiser system. The 1-litre tank holds the fluid supply for operation.
The unit is ready for use after a warm-up time of approximately five minutes. It is controlled via the wired handheld remote with manual switch; the five-metre cable gives you freedom of movement when triggering it. The pump must first be primed before initial use and after changing the fluid: hold down the switch until fog is emitted. This takes approximately five seconds.
The high-pressure pump operates with an oscillating piston. At maximum fog output, the machine consumes approximately 23 ml of fluid per minute; the approximate operating time at full output is 47 minutes. A direct thermal overheating protection system protects the heating block. After fog is emitted, the remote indicator lights up to show that the unit is heating up again; this takes approximately two minutes.
The housing is made of steel and aluminium. The machine is designed for floor operation and is powered via a three-pin IEC mains connection. Use only approved JEM/Martin fog fluid and operate the unit in well-ventilated areas. Keep the nozzle at least 60 cm away from people and surfaces; it can remain hot for a long time after use.
With its compact design, simple switch operation and five-metre remote cable, the Magnum 550 is suited to mobile DJ and lighting setups where fog is used to make light beams visible. The key factors when choosing are the maximum output, warm-up time and power supply version.
Features Martin Magnum 550
Fog machine for mobile DJ and lighting applications
Maximum fog output of approx. 160 m³ per minute
600 W ECO-Mass vaporiser system
Warm-up time of approx. 5 minutes
Direct thermal overheating protection
High-pressure fluid pump with oscillating piston
Manual control via wired handheld remote
Remote cable measuring 5 m
Integrated fluid tank with a capacity of 1 l
Designed for floor placement
Suitable for approved JEM/Martin fog fluids
Technical specifications
Heating power600 W
Maximum fog outputapprox. 160 m³/min
Warm-up timeapprox. 5 min
Maximum operating time at full outputapprox. 47 min
Fluid capacity1 l
Fluid consumption at maximum output23 ml/min
Remote controlwired, manual switch
Remote cable5 m
Fluid pumposcillating high-pressure piston
Housing materialsteel and aluminium
Placementfloor
Mains connectionthree-pin IEC connection
Mains voltage, EU model220–240 V, 50 Hz
Mains voltage, US model110–120 V, 60 Hz
Power consumption, EU model537 W at 220 V | 587 W at 230 V | 640 W at 240 V
Current consumption, EU model2.44 A at 220 V | 2.55 A at 230 V | 2.66 A at 240 V
Power consumption, US model640 W at 110 V | 699 W at 115 V | 761 W at 120 V
Current consumption, US model5.81 A at 110 V | 6.08 A at 115 V | 6.34 A at 120 V
Mains fuse, EU model5 AT
Mains fuse, US model10 AT
Maximum ambient temperature40 °C
Housing surface temperature during steady operation50 °C
Maximum nozzle temperature200 °C
EU safety standardsEN 50 081-1 | EN 50 082-1 | EN 60 335-1 (1995)
Weight4.6 kg
Dimensions (W x D x H)215 x 310 x 130 mm
Package contents
Martin Magnum 550 fog machine
1-litre fluid tank
1.5 m IEC mains cable without mains plug
Wired remote control with 5 m cable
Operating instructions
Parkring 3
85748 Garching b. München
Germany