BOSS GM-800
We recommend these alternative products for you
DBX 215
€199.00 Prices incl. VAT
Free shipping (DE)
This item is currently not available
Product number:
0010101517
Questions? Personal advice: +49 9951 - 690 190
- Try it risk-free for 30 days
- Secure payment with PayPal, cards and Klarna
- Fast shipping with DHL
- Service and shipping from Germany
- Flexible instalment payments
- More than 30 years of experience
Pay securely and flexibly
Product description DBX 215
When it comes to sound reinforcement, graphic equalization helps to specifically boost or cut individual frequency ranges. The dbx 215 is a two-channel 15-band equaliser for live sound, fixed installations and studio setups. Its 2/3-octave constant-Q filters cover the ISO frequency range from 20 Hz to 20 kHz per channel.
The 20 mm faders control the individual frequency bands. Using the range switch, you can select a control range of ±6 dB or ±12 dB; an additional input gain control also adjusts the input level by ±12 dB. For low-frequency interference, a 50 Hz low-cut filter with 12 dB per octave can be engaged.
A bypass switch removes the graphic EQ section from the signal path. Input gain and low-cut remain active. This allows you to compare the frequency correction without also switching off the level adjustment or the high-pass filter. Four LED segments display the output level; a separate clip LED indicates clipping.
Inputs and outputs are available as XLR and 6.3 mm jack for each channel. The HF-filtered connections are wired in parallel and support both balanced and unbalanced connections. A ground lift switch can disconnect the signal-to-chassis ground connection in case of hum problems.
With its 19-inch design and 1U height, the equaliser fits into any standard rack. The internal power supply and a dynamic range of more than 108 dB complement the features for use between a mixing console and power amplifier or in a studio signal chain. This makes the dbx 215 suitable if you want to process two signal channels with clear fader controls and XLR or jack cabling.
Features dbx 215
Two-channel graphic equaliser for processing live, installation and studio signals- 15 constant-Q frequency bands per channel with 2/3-octave spacing
- 20 mm faders for frequency bands
- Switchable fader control range of ±6 dB or ±12 dB
- Input level control with ±12 dB
- Switchable 50 Hz low-cut filter with 12 dB per octave
- Bypass for the graphic EQ section; input gain and low-cut remain active
- Four-segment LED output level display and separate clip LED
- Parallel XLR and 6.3 mm jack connections, can be used balanced or unbalanced
- HF-filtered inputs and outputs
- Ground lift for separating signal and chassis ground
- Internal power supply with toroidal transformer
Technical Data
Input typeElectronically balanced or unbalanced, HF-filtered- Input connectorsXLR socket | 6.3 mm TRS jack
- Input impedance40 kΩ balanced | 20 kΩ unbalanced
- Maximum input level>+21 dBu, balanced or unbalanced
- Common-mode rejection>40 dB | typical >55 dB at 1 kHz
- Output typeImpedance-balanced or unbalanced, HF-filtered
- Output connectorsXLR plug | 6.3 mm TRS jack
- Output impedance100 Ω balanced | 50 Ω unbalanced
- Maximum output level>+21 dBu at 2 kΩ or higher | >+18 dBm at 600 Ω
- Frequency bands15 per channel | 2/3 octave | 20 Hz–20 kHz
Frequency response<10 Hz to >50 kHz, +0.5/−3 dB- Bandwidth20 Hz–20 kHz, +0.5/−1 dB
- Dynamic range>108 dB
Signal-to-noise ratio90 dB
THD + Noise<0.004 %- Channel crosstalk<−80 dB, 20 Hz–20 kHz
- Low-cut filter50 Hz | 12 dB/octave
Mains voltage100 V AC, 50/60 Hz | 120 V AC, 60 Hz | 230 V AC, 50/60 Hz
Power consumption12 W- Mains connectionIEC socket
Weight2.13 kg
Dimensions (W x D x H)482.6 x 152.4 x 44.5 mm
Included in delivery
dbx 215 graphic equaliser- Power cable
- 4 rack screws with washers
- Owner's manual
- Registration card
Responsible company
Harman Deutschland GmbH
Parkring 3
85748 Garching b. München
Germany
Parkring 3
85748 Garching b. München
Germany
No reviews found. Share your insights with others.