We recommend these alternative products for you
Bose Freespace 32SE
€198.00 Prices incl. VAT
Questions? Personal advice: +49 9951 - 690 190
Product description Bose Freespace 32SE
With permanently installed sound systems, a loudspeaker must be suited to the mounting surface and the existing amplifier technology. The Bose FreeSpace 32SE is a 32-watt surface-mount loudspeaker for commercial indoor and outdoor areas; its weather-resistant enclosure with an IP55 rating is suitable for permanent installation.
The passive 4-ohm version has no transformer and does not require a controller. It is designed for direct connection to an unprocessed low-impedance amplifier output. The 70/100-volt and 4-ohm versions are different variants; make sure you choose the right one when planning your system.
The supplied U-bracket allows horizontal or vertical mounting on a wall or ceiling. The bracket is attached to the threaded inserts on the sides; once mounted, the loudspeaker can be tilted and secured at the desired angle. Two additional threaded inserts on the underside provide further mounting points.
This model uses the same equalisation as the FreeSpace Model 32 and is electrically and acoustically compatible with it. Both models can be used together on the equalised amplifier output of the Model 32. The plain enclosure is available in black or white and can be painted to match your interior.
With its frequency range of 90 Hz to 16 kHz and conical dispersion angle of 132 degrees, the loudspeaker is designed for permanent sound installations. The choice between 4-ohm operation and a 70/100-volt system, as well as the appropriate mounting method, are the key criteria for integrating it into your setup.
Features Bose FreeSpace Model 32SE
32-watt surface-mount loudspeaker for commercial indoor and outdoor areas
11.4 cm HVC driver with active equalisation
70- and 100-volt versions with transformer taps of 1, 2, 4, 8, 16 and 32 watts
Passive 4-ohm version with no transformer and no controller required
70/100-volt versions require the appropriate equalisation curve in selected Bose components
Electrically and acoustically compatible with the FreeSpace Model 32; can be used together on the equalised Model 32 amplifier output
U-bracket for horizontal or vertical wall or ceiling mounting, with adjustable tilt angle
Two additional threaded inserts on the underside
Weather-resistant construction with an IP55 rating
Black or white paintable enclosure
Technical data
Frequency range90 Hz–16 kHz (±3 dB)
Loudspeaker versions70 V | 100 V | 4 Ω passive
Power taps, 70/100-volt versions1 W | 2 W | 4 W | 8 W | 16 W | 32 W
Passive equalisation4 Ω, 32 W, no transformer
Sensitivity, active86 dB SPL at 1 W/1 m (pink noise)
Sensitivity, passive86 dB SPL at 1 W/1 m (pink noise)
Maximum sound pressure level101 dB SPL at 1 m (pink noise) | 101 dB SPL at 1 m (IEC noise)
Dispersion132° conical (−6 dB, average at 1–4 kHz)
Continuous power handling32 W
Connections70/100-volt versions, screw terminals | 4-ohm version, threaded studs with hex nuts
Weight2.3 kg
Dimensions (W x D x H)229 x 141 x 152 mm
Scope of delivery
Bose FreeSpace Model 32SE surface-mount loudspeaker
U-bracket with mounting hardware
Max-Planck Str. 36
61381 Friedrichsdorf
Germany