 | Productos |
 |
|
| Iniciar sesión como cliente |
|
| |
|
|
|
|
|
Klark Teknik Direct Injection Box DN 100
|
|
weitere Bilder:
|
Description:
The Klark Teknik DN100 Direct Injection Box is the natural successor to the long-established LBB100.
A ground-up redesign provides an extended dynamic range, lower noise floor and all the world-class audio performance you’d expect from Klark Teknik. DN100 is also designed to handle the rigours of life on the road: a thick aluminium shell protects the electronics, and this in turn is protected by a tough silicone rubber casing, which is replaceable and available as a spare part.
It´s also fitted a Kensington security slot in one of the end panels to allow the unit to be made secure using a Kensington MicroSaver security cable.
Features:
• The Direct injection module shall provide the functions of transformer isolation, impedance matching and attenuation into a low impedance active balanced input. The module shall be able to accept a maximum input level of at least 30dBu provide switchable attenuation from 0 to 30dB and output the signal into a balanced 600 Ohm load.
• Input connectors shall include two quarter inch jack sockets and one 3-pin XLR socket, all linked. Input impedance shall be 1M Ω (jacks sockets), 20K Ohm (XLR only).
• The output shall be transformer balanced and isolated, with a source impedance of 150 Ohm, capable of driving a 10dBu signal into a 2k_ load. The output connector shall be a 3-pin XLR socket.
• An earth lift switch shall be provided to disconnect input and output grounds when required.
• The unit shall obtain power from a 48V phantom supply.
• Output noise -100dBu. 20Hz to 20kHz unweighted, with input terminated by 10k Ohm resistor
• Distortion (THD+N) < 0.01% @ 1 kHz, +4dBu
• Frequency response +0.5/-1dB 20Hz to 20kHz
• Power consumption < 10mA
Technical Data:
• Input
- Type active electronic, balanced or unbalanced
- Impedance 1M Ohm nominal, balanced or unbalanced (jack connectors) 20K Ohm (XLR input only)
- Connectors 2 quarter inch jacks and 3-pin XLR linked in parallel
- Maxmum level 30dBu
- Attenuator 30dB switchable
• Output
- Type Transformer Isolated, balanced
- Impedance 300 Ω
- Connector 3 pin XLR
- Max. Level 10dBu with load >2k Ω
- Min. load 600 Ω
• Performance
- Noise -100dBu, 20Hz to 20kHz unweighted, with input terminated by 10k resistor
- Frequency response +0.5/-1dB 20Hz to 20kHz
- Distortion (THD+N) output < 0.01% @ 1kHz, +4dBu
- Power Requirement
- Voltage +48V Phantom *
- Current consumption < 10mA
- Weight 1kg
- Length 142mm (5.6 inch)
- Width 106mm (4.2 inch)
- Height 60mm (2.35 inch)
|
|
|
|
¡Escribe tu comentario en línea sobre este artículo, y comparte tus pensamientos con los otros clientes!
|
|
| | |
recordcase.de - su contacto competente para [[NOMBRE]]
|
|
|
Novedades |
|
Especialidades |
|
|
|
|
| |
|
|
|
|
| ¡Pide aquí tu catálogo gratuito! |
|
|
|
|
)
)
)
)
